These guys rarely tells their secret. Remember I was having some issues with my evo x and I called for some advice, they say they don't discuss things like that... That why I love Jay from real street and Roni from California. KNOWLEDGE is power..
@@richardknight1258 If they don't answer general questions then its there part on limiting customer service. They must only want deep pocket customers only.
@@chrisanderson7591 yeh i know.. amc did it like 40 years ago .. the video states "honda parts" so thats why i said "a honda style viscous coupler" as in one thats used in hondas or produced in the aftermarket for awd hondas
@@S14lopez1 yeh it makes sense to use one on an awd race car, they are why the awd hondas were running fast clean passes with relitively few years of development compared to other chassis imo
👍🏻😎 Good coverage.... I've noticed that car started launching smoother like a bracket car.... and it's moving!!! Can't wait to see what it does when it's turned up!!
That's the Grub Worm. One of the fastest stick cars on the planet. Him and Red Demon go back and forth with the Grannas Supra for fastest stick car in the world. All 3 have ran 6s ...4cyl, 6cyl, 8cyl all damn near evenly matched.
Many evos has gone deep in 7s with the Evo drivetrain. It's all in the suspension setup. Current Evo record holder RRT is using just the clutch slipper and a good 2 way adjustment.
@@derftuned2094 if you cant figure it out your self, might aswell reinvent the wheel? People have already figured out how to lunch these evos. Top evos on to 10 list of all fast evos are proof and 1 evo x in 7s are using the same good old suspension tuning.
And none of them are consistent. Anyone that’s been to WCF or the Shootout the past 5-10 years has seen it first hand. Running a time is one thing, doing it 5-10 times in a row without breaking or having to abort the run is another thing. My comment has nothing to do with supporting the AG Evo. I’m just making it clear that none of the top Evo’s are consistent.
@@derftuned2094 yes I've been to the shootout out and most just break stuff. RRT and their crew has already figured out the lunch. You can see their youtube video explaining what they did to get a consistent lunch. They haven't said much except alot of time spent experimenting on slipping the clutch and 100s of hours on the suspension setup. This breakthrough developement just happened only in a couple of years. You can clearly see these evo lunch at the shootout this year. None of them hop no more. People have found a break through with the suspension setup. This isnt unachievable. It's been done. Why add complexity.
@@vvlswapd200sx I should have worded that differently. Josh’s is still a full interior, H-Pattern street capable car with a Honda block. Kyle’s is a purpose built race car that’s not really street capable with a billet block and a sequential. The only thing they share is the chassis and the k-series base engine. Both are bad ass build too!!
@@jaycqc8136 got it. I thought he went billet already. Either way, it’s 2 different ways to get to a 7. I’m curious to see how the 2AR and 2GR progress with more mods coming. I plan on a 2gr just for the sound and a simple street car.
Javier was asking about the engine combo as far as Anthony is able to tell but i believe Dan's evo utilize a Callies crank. Last thing, they look very happy and confident with that combo but still 2.2 is nothing new just in case they found a sweet spot for LR 2.2 94/156mm w/ 1.012" height piston. most high powered evo afraid to use that shorty piston. AG always 1 step ahead, cheers!
Obviously none of yall have seen RRT Evo, Wild Evo, Boostin Evo, Boostin dsm lunch, and countless others on good old all original Mitsubishi engineered suspension chassis. Even though they are upgraded suspension parts, none of them are utilizing other suspension parts from other manufacturer.
These guys rarely tells their secret. Remember I was having some issues with my evo x and I called for some advice, they say they don't discuss things like that... That why I love Jay from real street and Roni from California. KNOWLEDGE is power..
the technology they borrowed from a honda is the viscous coupler nothing else, not sure why they playing the secret game when it only makes sense.
Yup, straight garbage tier for the community
I don't blame them if they want to keep intellectual property secret.
@@kenS87 nothing is wrong with trial and error. But ordinary Q&A on evos on a whole.
@@richardknight1258 If they don't answer general questions then its there part on limiting customer service. They must only want deep pocket customers only.
I don't know what's more impressive the car or this guys beard 🤣
it increases downforce
I bet its a honda style Viscous coupler allowing slip in the drivetrain to the rear whheels
Viscous coupler came in many platforms way before hondas.
I've always wondered how they would work in a evo after finding about them few years ago
@@chrisanderson7591 yeh i know.. amc did it like 40 years ago .. the video states "honda parts" so thats why i said "a honda style viscous coupler" as in one thats used in hondas or produced in the aftermarket for awd hondas
@@S14lopez1 yeh it makes sense to use one on an awd race car, they are why the awd hondas were running fast clean passes with relitively few years of development compared to other chassis imo
The more Honda you put into it, the faster it goes
😂how true this is
@@Servingbase I think he just grew up on Honda and nothing but Honda. That's all he knows.
@@TravisG001 that was my thought… there’s a reason dsm’s we’re the first 4cylinder in the 6’s😎🤣
@@cvcgaming1284 brother say it louder and maybe they will wake up and fall of their beds.
@@TravisG001 !!!!😂😂
👍🏻😎 Good coverage.... I've noticed that car started launching smoother like a bracket car.... and it's moving!!! Can't wait to see what it does when it's turned up!!
As Honda guy I approve it!!! 👍🏼👍🏼👍🏼
💪🏼😎
Amazing!
-2010
Guy in a Honda next to an Evo: Nice car! What's the retail of one of those?..."
💪🏼😂
The truth nothing in it is Honda! 😄
Built Beard
That thing has to be good for an extra 50hp
🤣😭🤣
Billet beard
Edit:
CNC milled from rhino horn
Switch the beard and haircut and you've got my dad in 1976
Beyond majestic!
I could not stop admiring that fella's perfectly sculpted beard. Absolutely glorious beard. Oiled to perfection.
That beard is built not grown 🤣🤣🤣
That EVO is sick and fast AF but damn that white Camaro got down.
That's the Grub Worm. One of the fastest stick cars on the planet. Him and Red Demon go back and forth with the Grannas Supra for fastest stick car in the world. All 3 have ran 6s ...4cyl, 6cyl, 8cyl all damn near evenly matched.
The MR2 is just perfection. Always had a soft spot for them.
Many evos has gone deep in 7s with the Evo drivetrain. It's all in the suspension setup. Current Evo record holder RRT is using just the clutch slipper and a good 2 way adjustment.
Unfortunately most are very inconsistent
@@derftuned2094 if you cant figure it out your self, might aswell reinvent the wheel? People have already figured out how to lunch these evos. Top evos on to 10 list of all fast evos are proof and 1 evo x in 7s are using the same good old suspension tuning.
And none of them are consistent. Anyone that’s been to WCF or the Shootout the past 5-10 years has seen it first hand. Running a time is one thing, doing it 5-10 times in a row without breaking or having to abort the run is another thing. My comment has nothing to do with supporting the AG Evo. I’m just making it clear that none of the top Evo’s are consistent.
And you wonder why the Ct9a is always following every other platform drag wise.
@@derftuned2094 yes I've been to the shootout out and most just break stuff. RRT and their crew has already figured out the lunch. You can see their youtube video explaining what they did to get a consistent lunch. They haven't said much except alot of time spent experimenting on slipping the clutch and 100s of hours on the suspension setup. This breakthrough developement just happened only in a couple of years. You can clearly see these evo lunch at the shootout this year. None of them hop no more. People have found a break through with the suspension setup. This isnt unachievable. It's been done. Why add complexity.
I have a feeling they put a Honda visscus in that rear drive shaft
Yip
18:31 that evo front left wheel bout to fly off
god damn your right!
Idk whats more impressive the evo or this dude's beard 😂😂
NICE!!! I love swapped drive trains, it’s original and always custom. 👍🏻🏁
Another mr2 in the 7’s! Sick! Congratulations!
Amazing to see Josh hit a 7.xx! Now that’s 2 MR2’s in the 7’s with completely different builds.
Different builds? I mean both k series car lol
@@vvlswapd200sx I should have worded that differently. Josh’s is still a full interior, H-Pattern street capable car with a Honda block. Kyle’s is a purpose built race car that’s not really street capable with a billet block and a sequential. The only thing they share is the chassis and the k-series base engine. Both are bad ass build too!!
@@cpftank09 kyle car still has a sleeve block not billet he said if it blows up he prolly go billet
@@jaycqc8136 got it. I thought he went billet already. Either way, it’s 2 different ways to get to a 7. I’m curious to see how the 2AR and 2GR progress with more mods coming. I plan on a 2gr just for the sound and a simple street car.
@@cpftank09 I see you argument! Pretty much one is street "trim" the other one is a "racecar" lol
I still find it unreal that four little pistons can generate that much horsepower. Amazing to me 😮😮👍👍
Nothing in the drivetrain of that Evo is made by Honda! Lol
Javier was asking about the engine combo as far as Anthony is able to tell but i believe Dan's evo utilize a Callies crank.
Last thing, they look very happy and confident with that combo but still 2.2 is nothing new just in case they found a sweet spot for LR 2.2 94/156mm w/ 1.012" height piston. most high powered evo afraid to use that shorty piston.
AG always 1 step ahead, cheers!
Clickbait...
Idk what it is but I love the rear end of the mr2 such a dope design by Japanese engineers
That Evo is nice but that F-Body was next level 👀👀🔥
An Evo with Honda parts, that is never talked about! That was a horrible build break down.
Great now evo guys are gonna be fighting for Honda awd parts
There are Hondas with Evo parts too 😂
Finally there's now 2 mr2s in the 7s
Oh shit that hatch is fast much much respect bro
Derf putting in work
18:30 Look at the front driver side wheel! Looks violent!
Another 1200whp+ K-series at the front, would balance the weight distribution tremendously ;).
What if: Josh and Boosted bois Kyle both made their MR2’s AWD??! Monsters in the 60 ft I think!!!! 🙌🏽🔥🔥
RWD
I've often dreamt of making my mr2 awd.
Boostedboiz mr2 is rwd
@@5211miki I know that, I’m saying he should make it AWD. Worlds first! 👌🏽
Insanely cool builds
Made content, nuff respect from the islands 🇦🇬
Three bad ass machines lol💯👍👍👍
Since Texas killer car is back in action and was at street kings! When we getting a video?
Street motor with alum rods?
The launch is pretty sick on this thing 🔥🔥
Thats the biggest cleanest looking beard ive ever seen 👀
Which one the Evo or that guy’s?
Time for the Mr2 to get some more carbon fiber pieces. Doors, fenders etc.
Josh mr2 vs kyles mr2 would be a sick video 😎😎
No it wouldn't josh would just get gaped
Thats the way to go, further down the road o plan the same for my 5cyl mk6 golf. First we break some vw fwd records.
I ♥️ HONDA!
I would love to be kept in the loop about the evo transmission And the 2.2 liter evolution Please
God I need an awd civic so bad 😢 better get to saving
Bad ass video with some of the most bad ass cars.
Best beard builder
Ça va tellement plus vite quant on pare en deuxieme la première c est pour burner boys
Evo!!!
AG Tuned website is down.
178mph trap holy shit lol
Honda Power!
Gotta be more that 1200 maybe 1300 in that evo
Dsm has to go fast some how since Hondas beating dat ass now
Oh when did all these Hondas start to beat red demon? Serious question I'd like to watch.
These Hondughs just discovered AWD and now they the shit. They just proved how shitty FWD platform is.
@@jd-it4on speed factory 🤐
@@TravisG001 running low 7s in a fwd is common in sfwd thats faster than most dsm thats on the track
Love the content
Todays the day🕺🏾🏎️
Would be faster with slightly longer gearing.
@2:39 that white blur is a Ponatic Trans AM, right?
Its a Camaro. The worlds fastest H pattern.
@FUBAR thanks, boss. I was not sure.
Fast as hell! Just doesn't look as good going fast as an mr2 😏
Guessing it has a locked center diff and a honda viscous coupler..
Sooooo did that camaro stop???
Haha yeah came to the comments for that but to my surprise, nobody is talking about the chute, only the beard! 😂
I'm gonna bet the Evo has a viscous coupler And a Clutch slipper.
Obviously none of yall have seen RRT Evo, Wild Evo, Boostin Evo, Boostin dsm lunch, and countless others on good old all original Mitsubishi engineered suspension chassis. Even though they are upgraded suspension parts, none of them are utilizing other suspension parts from other manufacturer.
What is the Evo turbo size ?
is just a Honda or land rover viscous coupler, calm down with the secrets it only makes sense.
honda viscous
Thats what I was thinking man. Explains why the launch is so smooth
Quand ta 1000 ch et boite mecanique il faut partir en deuxieme rapport plus long que la premiere logique non 😜👉😑🏁😘
Big up to you guys seriously this is bad a bitch an from what i see trouble is comin bess belive 💯👑🔥🔥⚡⚡💪🏾💪🏾💨💨 🤌🏾 🤳🏾 🤫
What parts hes using?
show love... the guys that do this... thats all they do
Damn🧐
Interesting beard!🤣
The Honda parts making the difference. Lol
Do kyle from boosted bois mr2 the world record car
What happened during the 3-4 shift in Fred awd civic
Probably boost cut
Hand on the strain gauge too soon.
O damn
How often does that chain snag a hair. Yikes
Not saying your specs, because you think someone will steal your design, is silly.
They want to sell their spec package to support their shop.
Says the person who has nothing to put specs on.
alot going on with that beard
Save the Honda parts for the rest of us
Evo
Aluminum rods basic street motor ha
Normal in Evo's
Plus le nos qui faut envoyer seulement si l autre ce rapproche dison en 3eme 4 em arriver 😜😜🏁👉😎👍😂
Can we talk about the 200 MPH car that lost its Chute? Uhhhh Yikes
sick car, but jesus who welded that evo exhaust manifold lol. horribleeeee.
i cant stop staring at his beard........ but nice car tho.
I don't think humble and evo community should be together lol.
Voilà avec des rapport passer les vitesse plus vite que sont ombres ca c est un rasseur automatique branlette
Kyle from BoostedBoiz has a faster MR2 with a 7.76
Everyone is aware of that…. This car is still a street car with an H pattern trans and drag radials.
Definition of clickbait
2 fastest Evo in the wolrd are in Greece
That’s false
Where do you get your weed
a) no one cares about evos in greece
b) no
Okay. Good for Greece but we need faster Evo’s in the state’s 🇺🇸
Greek boys can’t wait to see an evo video to comment this but they never have an unedited video to post. 🤣