You know he cares about it when he’s putting a brand new cam in it. Instead of the dumpster fire sloppy stage 2 that’s seen more lifters then a planet fitness
Are you sure the new cam will make power at 7800 rpm? Jack ran a @.050 227/231 in a 4.8 that shifted at 7800 but that’s a 3.268” stroke crank and he had BTR .685” springs w/Johnson limit travel lifters.
This project showed up on my feed for the first time today. Did I miss the part where the block was prepped and all the bearing clearances for the crank and cam were done and degreed?
Where do you get your engine rebuild kits for LS stuff? I usually get my kits from Amazon/eBay but I want I recently bought an ls7 and don’t want to put cheap quality crap in it lol
I'll use the basic amazon gasket sets. And I'll use rockauto to get part numbers for bearings, rings, etc and order it all off Amazon cause its usually cheaper and free shipping lol
Most Holley parts are made in China, so those other parts aren’t just knockoffs, in most cases they are the same part in the same package without the Holley sticker and mark up. Moroso sells the same pan but with a made in America pickup that’s much better than any of the others and I’m pretty sure it’s still cheaper than Holley’s pan. Engine looks good, I’ve never seen that rustoleum engine paint, the stuff they sell here is terrible now
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
You know he cares about it when he’s putting a brand new cam in it. Instead of the dumpster fire sloppy stage 2 that’s seen more lifters then a planet fitness
MORE LIFTERS THAN PLANET FITNESS 👏👏👏
I like it, but Planet Fat-chix doesn’t have any lifters like a real gym.😂
@@deegan727 lol true. Don't wanna get banned for setting the weights down too hard or grunting lol
I'm getting planet fitness ads on this video now... Thankkkssss
Are you sure the new cam will make power at 7800 rpm?
Jack ran a @.050 227/231 in a 4.8 that shifted at 7800 but that’s a 3.268” stroke crank and he had BTR .685” springs w/Johnson limit travel lifters.
My buddy who suggested this cam was suggested it by Capizzi. And he shifted a SBE at 8200 with this cam
This project showed up on my feed for the first time today. Did I miss the part where the block was prepped and all the bearing clearances for the crank and cam were done and degreed?
No need to degree it all factory parts using factory specs no need to check anything it’s better that way as long as you got oil pressure lol
Btr recommends dot to dot on cam
Keep it up man. 👍
Link to that sump? Keen to have a looksie
It's looking good keep up the great work
Looking good brotha can't wait to here this monster
Factory flat tops? Or forged?
Looking good 👍👍
Awesome video thanks from Melbourne Australia 🇦🇺
What parts are necesarry to make it live at 7800rpm?
Like the Chevy orange color anything going on with the Chevelle
Yeah, got the paint, just waiting on some warmer weather. And I have the motor for it. Got a deal on a reeeeaaallly nice 406sbc
@@SniderTron3000 is that what's in it or you putting in it
@lloydprickel825 nah, thats what I'm putting in it
Hell yea Josh can't wait for next video
Very satisfying seeing a a LS going together 👍
Good job brother!!!
I'm one of those people needed bid block procharged.
Where do you get your engine rebuild kits for LS stuff? I usually get my kits from Amazon/eBay but I want I recently bought an ls7 and don’t want to put cheap quality crap in it lol
I'll use the basic amazon gasket sets. And I'll use rockauto to get part numbers for bearings, rings, etc and order it all off Amazon cause its usually cheaper and free shipping lol
Most Holley parts are made in China, so those other parts aren’t just knockoffs, in most cases they are the same part in the same package without the Holley sticker and mark up. Moroso sells the same pan but with a made in America pickup that’s much better than any of the others and I’m pretty sure it’s still cheaper than Holley’s pan. Engine looks good, I’ve never seen that rustoleum engine paint, the stuff they sell here is terrible now
Hell yeah Buddy 😎🇺🇸
😊!
new cam bearings ?
❤
haha first view never did that before
Chevy orange 🤮
Like #69 oh yeah
Looking good
Nice 👍…. Well better than just nice. Love that you share the stoke of building your own “Funmobiles” 🙏❤️😎🤙🛻💨