With all due respect of course but , yeah you missed something .....you missed a lot of relevant information if you ask me... gallons per minute, working voltage minimum and maximum, and hose size requirements, Max hose length, does it operate on a switch or when you turn the water on?
Hi Shurflo I have a Shurflo 12v - 150psi pump used for a water injection system. I'm just wondering if this pump can draw slightly? I'm using a 5lt tank and the pump head will be mounted almost level with the bottom of the tank, however I can't mount the pump lower than the bottom of the tank. Do you think the pump will draw the last 50mm of water out of the tank (the tank outlet IS at the very bottom of the tank)? Thankyou Eric
I think they're above the tank in most cases. Self-priming so it does draw. The distance from the tank seems to be a bigger issue, due to friction in the pipe
@@tommoore7348 Thanks a lot Tom! I've actually mounted the pump to the tank, so it's straight out of the tank through a filter and into the pump. It sounds like that should work OK then.👌👍
Hi Chris, the only issue we seem to get from customers is from leaking which around 99% of the problem is from not being installed correctly. A lot of people use plumbers tape to seal and not the correct Shurflo fittings. It would be very uncommon to hear that these fail to prime properly, as they have 'Run Dry Capability' and can self-prime up to 1.8M, great bit of kit!
How shurflow 4009 has rapid flow with one tap on but ok with two. How do we adjust the pump and where are the adjustment screw
Hi
Are these pumps able to be mounted horizontally as well as vertically?
Thanks
Eric
Can I lubricate my shurflo pump with olive oil while not being used over winter
With all due respect of course but , yeah you missed something .....you missed a lot of relevant information if you ask me... gallons per minute, working voltage minimum and maximum, and hose size requirements, Max hose length, does it operate on a switch or when you turn the water on?
Hi Shurflo
I have a Shurflo 12v - 150psi pump used for a water injection system.
I'm just wondering if this pump can draw slightly?
I'm using a 5lt tank and the pump head will be mounted almost level with the bottom of the tank, however I can't mount the pump lower than the bottom of the tank.
Do you think the pump will draw the last 50mm of water out of the tank (the tank outlet IS at the very bottom of the tank)?
Thankyou
Eric
I think they're above the tank in most cases. Self-priming so it does draw. The distance from the tank seems to be a bigger issue, due to friction in the pipe
ua-cam.com/video/bU-x9SMwwtQ/v-deo.html
@@tommoore7348 Thanks a lot Tom!
I've actually mounted the pump to the tank, so it's straight out of the tank through a filter and into the pump. It sounds like that should work OK then.👌👍
Are these the pumps that people are having trouble with in their Jayco campervans??. It seem to be common that the pump fails to prime properly.
Hi Chris, the only issue we seem to get from customers is from leaking which around 99% of the problem is from not being installed correctly. A lot of people use plumbers tape to seal and not the correct Shurflo fittings. It would be very uncommon to hear that these fail to prime properly, as they have 'Run Dry Capability' and can self-prime up to 1.8M, great bit of kit!
The wires on the pump should be at the top....
Descent length and girth.
YOU MISSED THE FRIGGIN WIRING!!!!!!!!!!!!!!
Ah you’ll figure it out. Don’t void that warranty though 😅