Brian is really like the dad of the whole group. Nobody questions what he says, he does great work that everyone awws over, and the way he’s so supportive but makes fun of guys too is great
Keep the 36mm hubs & spindles once and if you go k swaped. If you're getting 32mm hubs from a dc2, you will need a usdm integra spindle or a civic em1 spindle to work and be able to use the bigger brakes. You will be able to use those 32mm hubs, if you go kswap but will either need custom axles or use base rsx axles.
just go buy 2 spindles from an 01 crv which comes 5 lug direct bolt on brother..remember you will need the 36 mm hubs when you go k swap anyways so hold onto them
I’ve been a tech for Acura for 10 years, been buying parts for at least the same amount of time. What I’ve noticed is Acuras prices on type r parts, or parts in general, are directly related to the amount of them still in inventory. All that stuff has been discontinued for a long time, there’s probably only a hand full of the OEM ones left in the country.
Except functionality wise he is completely wrong 215 on 8" with at least 38 or less offset & bit of camber w/ even 8kgmm/6kgmm coilovers not even rolled fenders will clear perfectly fine
Brain is legit like your father Reminds me of when I lowered my first car, dad yelling at me saying how bad it’s going to wear parts and drive like shit. Hilarious dynamic you two have.
Hell yeah Tucker in the house, used to run those tires on my hatch and they did rub wasn’t about to put camber to tuck them so I got one size smaller like Brian said. Tires are pricey
Can't believe you guys didn't realize it was the axle nut come on Jim it's just a Honda nice n simple Brian kills me 😂 too high for this you got the tires right dj sonic said so you scuff Brian's quarter a bit nbd
Crv is 36mm if I remember correctly! Just do the k24 swap and keep the 36mm hubs with rsx type s axles! I'm on 32mm base model axles on our k20a2 swapped ek and snapped a few already 😆
There's were big honda scene back in days in NZ that did shit like this, s15 front ends widenody 18x12 all round, 1000hp, crx ek widebodys with evo emgines etc
I could also maybe say pulled the rear plastic and putting a bunch of the rust killer inside the quarter panel itself would also help prevent against future rust you can’t get right to where he is working from the inside through some holes lol
I paid a shop in hartford 300 to swap ends on my single cam axles to 36mm ends because they sold me. Jdm 5lug conversation which is what you have if hubs are 36mm
You need civic type r hubs those are 32mm... the Integra type r hubs are the bigger 36mm ones.. when you do the k swap if you use an eg sub frame you can use ep3 axles they're 32mm and the right lengths not sure if that helps ya bro
I love Brian but they definetly fit! 😂 I have 225/45's on my 16's, on an ek sedan and they fit great. Obviously needs a roll but any wheel/tire setup worth a fuck needs a roll
You need to take your stock axles and type r axles and have a axle repair shop put the spline end off the type r axles on to your stock axles dj i said this before
Deeee-Jaaaaayyyy!!!!! Your honda is coming along and looking freaking dope my dude!! 🤘🤘🤘🤘 Dont listen to B-hall!! 🤣🤣🤣 those TE's look freaking bad ass on that car and your tires size is MONEY!!! 🤘🤘🤘 I really really hope that once you get her all done then you start taking it to the track and do some circuit racing/track days!! That would be rad as fuck to see you do some circuit/track driving or even some bad ass back roads mountian touge driving!! You're going to LOVE smashing on a honda! They truly are super fun track cars!! Love the videos my dude! Keep it up and stay safe buddy!! 🤘🤘
With nice wheels, don't grab the inside barrel with the teeth on the tire machine.. open the jaws up first, clamp them on outside of the wheel. Jimmy knows what's up
Brian got me dyin ☠️☠️☠️.he's like your dad yelling at you for not holding the flashlight in the rite spot.
😂
Stuuuupid facts lol 💯
I thought I was the only one that went through that with my dad.
Brian is really like the dad of the whole group. Nobody questions what he says, he does great work that everyone awws over, and the way he’s so supportive but makes fun of guys too is great
He's like grants dad a.
God you and Brian are so funny together.
Brian at 20:21 🤣🤣🤣 hes like the older brother whos had enough of everybodys shit😂
I swear this is so accurate Lmfaoo. I’m like this with some of my coworkers at my parts store
@@ghosteh6503 haha I’m 100 percent Brian when I’m at work too.
Don’t throw out your old hubs because the axels are a lot beefier for the swap you will need them
He said he gonna use them for the swap ones he geting now is so he can drive it now
you’ll need the 36mm hubs for the k swap so don’t throw them away
Run 205 in the back keep the 215 up front, staggering will make the back rotate more
I love that DJ is the friend that EVERYONE yells at about the shit that he does to his cars, and then they turn out fire anyway. 😄
Brian hahahahahahaahah
Keep the 36mm hubs & spindles once and if you go k swaped. If you're getting 32mm hubs from a dc2, you will need a usdm integra spindle or a civic em1 spindle to work and be able to use the bigger brakes. You will be able to use those 32mm hubs, if you go kswap but will either need custom axles or use base rsx axles.
FYI. Rsx base model hubs are the same size spec with a 32mm. But you won’t see this
Are they 5 lug? Base models and I see it 😝
@@djnoway yes Acura rsx base model !!! Not type s. Base model is 32mm 5 lug And fits the wheel bearing for your spindle
Yes it has to be BASE MODEL not type S @S
Djnoway
Brian 😂 I love how he protects his work like a caring father
Keep your hubs as 36mm oem k20a2 axles will bolt right in with the eg subframe. Type S and Si axles are 36mm. Base rsx axles are 32mm
🤣😂 i fucking love Brian
just go buy 2 spindles from an 01 crv which comes 5 lug direct bolt on brother..remember you will need the 36 mm hubs when you go k swap anyways so hold onto them
Crv is already 36mm which is what he has ……
Dj, great content and it's always funny when Brian is involved with your videos, good banter always make me laugh. TE's look good.
Jimmy just saved the inside of your alloy 👌😂😂
Brian vs Dj arguments are my absolute favorite between anyone across this channel and Jimmy's. You guys kill me lmaooo
Keep 36 mm hub for k swap especially if you wanna put down some power. If not you can use RSX base model cv shafts with 32mm hub. 🤙🏼
I’ve been a tech for Acura for 10 years, been buying parts for at least the same amount of time. What I’ve noticed is Acuras prices on type r parts, or parts in general, are directly related to the amount of them still in inventory. All that stuff has been discontinued for a long time, there’s probably only a hand full of the OEM ones left in the country.
Brian is the smartest man out of the group lol. Function always wins
Except functionality wise he is completely wrong 215 on 8" with at least 38 or less offset & bit of camber w/ even 8kgmm/6kgmm coilovers not even rolled fenders will clear perfectly fine
Brian is the one telling you how it is so when it cracks and the tyre blows you are going to owe him an apology.
When my kids are misbehaving, I make them watch DJ videos while holding hands saying "I will not do drugs". Works everytime
Brain is legit like your father
Reminds me of when I lowered my first car, dad yelling at me saying how bad it’s going to wear parts and drive like shit.
Hilarious dynamic you two have.
Ant is so funny on this channel but Jimmy’s He’s a professional 😂😂😂
yo if you use proper tire lube or even tire shine it won’t be so difficult to seat the bead
Dj be selling bare nose beers outta that tire shop🤣🤣
Tommy will be stoked that you didn’t fit stretched tyres to those wheels 😂
“If you can’t remember shit go back and watch your fuckin life over again” hahahaha
BRIAN HAS FUCKING HAD IT DONALD
Hell yeah Tucker in the house, used to run those tires on my hatch and they did rub wasn’t about to put camber to tuck them so I got one size smaller like Brian said. Tires are pricey
LMAO another unsupervised moment from B Hall and Jimmy! Leave it to DJ to do opposite of his council and then ask for more help. 🤣
You should do 36mm hubs up front. With that k24 ur gonna break those axles
The chunky te fitment is sick. They will definitely rub though
This is one of the best appearances of Brian ever.
DJ. You were 1st on my UA-cam playlist today. Even ahead of Cleetus, LZ and Jimmy. Love the content even though it’s “just a honda”.
Father B-Hall spitting Knowledge to his Son....Hahahahaha!....SO Funny!
I’m just here for Brian hollering at DJ
0:57 tell that to the guys who mounted my set of Falken rt 660s. Had to get a new tire ordered because the ruined the side wall trying to mount them.
Can't believe you guys didn't realize it was the axle nut come on Jim it's just a Honda nice n simple Brian kills me 😂 too high for this you got the tires right dj sonic said so you scuff Brian's quarter a bit nbd
This man brian have me cryingggg😂😂
Also, the tires on the TEs look awesome. On stiff coils you should be fine tbh. My fitment in the rear isn't much different
215 is perfect, a little camber and the tire will go up in the fender, chill Brian lol
CR-V hubs are 32mm i believe and 5lug.... and i think prelude outter joint on your civic axle works as well.
They are 36mm
Crv is 36mm if I remember correctly!
Just do the k24 swap and keep the 36mm hubs with rsx type s axles!
I'm on 32mm base model axles on our k20a2 swapped ek and snapped a few already 😆
There's were big honda scene back in days in NZ that did shit like this, s15 front ends widenody 18x12 all round, 1000hp, crx ek widebodys with evo emgines etc
I'm so glad Jim mentioned clamping on the outside of the wheel. I always cringe when I see people do that..
I was thinking the same exact thing, I was thanking jim for saying that🤣
This hatch is gonna be crazy. Its already looking so good! Edit: TE's look gas especially the white. Is it gonna stay silver?
Type Rs look way better 🤷♂️
Yea I don’t want to but not painting another car yet
Fresh campaign to stop people saying “gas”
@@djnoway Silver is under rated, it'll be GAS!
When he was like "this makes me wanna hit shit" I fuckin died 💀
uncle brian hella mad !! lol new tik tok meme from brian about stance car being too high lol
2:33 got me crying LMAO
B Hall angry is the best thing ever
Brian is the shizznit. Love that dude he's honest he don't just say when ya you want to hear ya 😉
Usdm type r hub is 32 mm, fastest way is to swap prelude or crv outer joints to integra axles. Axle build kit very easy.
Yo DJ goes "smells kinda loud in here" LFG awesome the CT boyz is where its at. Much love from ur neighbors here in RI keep creating the content.
Donald was servin that ZA out of that townfair tire truck 😂😂😂
i forgot how good jims subaru looks, its fire
smelling loud in the shop, love it
Should out Bhall for the beautiful work
On that quarter pannel
Been loving the longer vids DJ keep it up
Brian and Tommy need to hang out. Like Godzilla vs King Kong. Savage legends:)
You can use hubs from a 5th Gen prelude. Watch prizza Mike’s video on his integra 5 lug swap
Mike's the man
“Chronic said… “ 😂😂😂😂
Listen to Brian! :D
The Te's and tire with a little sidewall look great. 💪
Conract mike prizza, he said there was a cheaper version, crv axles or something?
with an actual functional ride height those wheels will go hard
I could also maybe say pulled the rear plastic and putting a bunch of the rust killer inside the quarter panel itself would also help prevent against future rust you can’t get right to where he is working from the inside through some holes lol
- KTuned is a little better than Skunk. That's what I'm learning. Look at the paint on it, shiny!
Donald "No way" Di Bianco, 2023 18:12
Karcepts kwh05 are 5 lug hubs you can get them at tristate motorsports....prolly best to call tristate motorsports to get the correct hubs
You should definitely keep the hubs 36mm axle size, because when you go K series it will work great.
Bry be wildlin, big bro vibes
You get a hub you get a hub you get a hub😂😂😂😂
I paid a shop in hartford 300 to swap ends on my single cam axles to 36mm ends because they sold me. Jdm 5lug conversation which is what you have if hubs are 36mm
You should of just got 36 mm itr axles for the hubs. Inner spline is the same its just the outer that is different.
“You sold something other than tires out of it” 😂
Rock Auto you can get all those parts man. Spoon said it earlier. CRV outers should work
You need civic type r hubs those are 32mm... the Integra type r hubs are the bigger 36mm ones.. when you do the k swap if you use an eg sub frame you can use ep3 axles they're 32mm and the right lengths not sure if that helps ya bro
I love Brian but they definetly fit! 😂 I have 225/45's on my 16's, on an ek sedan and they fit great. Obviously needs a roll but any wheel/tire setup worth a fuck needs a roll
You need to take your stock axles and type r axles and have a axle repair shop put the spline end off the type r axles on to your stock axles dj i said this before
DAMNNN THE TE’s THOOOO
We need more angry Brian 😂
Brian is absolutely hilarious 😂
Haha brain is the man cracks me up every time !
Brian rant was hilarious
I don’t recall a single ek hatch in the last video lol it was a coupe and eg hatches lol 😂
Brian is Fucken hilarious!!! He’s gonna smack the shit out of DJ one day!!! BHall, Ant and DJ need a series!
We need to see sumo drifting the G!
I absolutely LOVE Brian ❤ lol me and him are the same person for different friend groups 😂
Lmao good video dj, I know how it feels to just wants the parts right now and not how to wait through all the bullshit
Hey Dj U can use the end of 99 crv axels on ur d series axel u have to part together ur own …
That's it I'm puttin you on the news
Brian's rants are everything
Prizza mike has great videos explaining honda axles
congrats on the 66.6 subs my bro! keep it up
I feel yellow is a valid color for my mans civic 😁
44600-ST7-R00 There's the part number for the ek9 hubs to suit a 32mm hub nut shaft. You have 98 spec integra hubs which take 36mm.
24:15 an Ek hatch is not a “bubble” .. the eg hatch is coined as a “bubble”
Honda fact of the day 😂
No we don't measure by the nut Jimmy. We go by the axle spline count. 😂
Deeee-Jaaaaayyyy!!!!!
Your honda is coming along and looking freaking dope my dude!! 🤘🤘🤘🤘
Dont listen to B-hall!! 🤣🤣🤣 those TE's look freaking bad ass on that car and your tires size is MONEY!!! 🤘🤘🤘 I really really hope that once you get her all done then you start taking it to the track and do some circuit racing/track days!! That would be rad as fuck to see you do some circuit/track driving or even some bad ass back roads mountian touge driving!! You're going to LOVE smashing on a honda! They truly are super fun track cars!!
Love the videos my dude! Keep it up and stay safe buddy!!
🤘🤘
With nice wheels, don't grab the inside barrel with the teeth on the tire machine.. open the jaws up first, clamp them on outside of the wheel. Jimmy knows what's up
"it doesnt do it justice" said every youtuber
Run 205 in rear and 215 in front, lots of Honda’s run reverse stagger.