I am neat picking but , in order for your torque to be accurate the wrench handle and torque wrench must be in straight alignment. Otherwise the length from your grip to the center of the axis of the nut will change. Torque is measured weight over distance. Or in this instance pounds over feet. Good video
good n snug is all you need..... use the torque on the scope rings and bases always deburr the rings remove all sharp edges or it will dig into your scope
Well done video, one of the best 👏🇺🇸
Thank you for posting this. I am thinking about trying to re-barrel my own and this is one of the more informative videos that I have found
Glad we could help. Let us know if we can help with a barrel.
Will that action wrench work on any or all of the Kauger Arms actions?
Good video!
I am neat picking but , in order for your torque to be accurate the wrench handle and torque wrench must be in straight alignment. Otherwise the length from your grip to the center of the axis of the nut will change. Torque is measured weight over distance. Or in this instance pounds over feet. Good video
In this application it is not that important. tighter is really better within reason.
Actually everyone says 90 degrees between torque wrench and nut wrench.....
👍
light pressure on go and I'm done, like a little feel on the go and done
Did you thread the bolt handle?
Is your torque wrench set to 70 ft lbs? Did you compensate for the center to center distance on the wrench?
good n snug is all you need..... use the torque on the scope rings and bases always deburr the rings remove all sharp edges or it will dig into your scope