@@ridewithKY Agreed I'm going to do the same for mine it was either corbin or kelpi . Have you seen the corbin seat ? i put a little cowl around the light and put regular mirrors cause those bar end made the bike like 42" wide rally hard to lane split. next is exhaust and seat . I have video of my bike on IG at the same handle as here .
I have seen the Corbin and it’s nice of course but I think I prefer the KELPI. However, anything is better than the stock seat. 😂. I’ll make sure to check out your instagram. Appreciate you sharing your experiences and knowledge.
I'm getting my xsr900 in the 2024 red colour in a few weeks and I'm for sure going to put a kelpi seat on it! They look so much better than the stock seats, truly amazing
Great setup. I have exactly the same setup minus the clip ons and bar end mirrors, but the black model. Chuffed with the seat and the exhaust, and as you said, customer service was spot on. I'm looking forward to the next video. Great channel. 👍🏻
Great. Everybody seems to be happy with their KELPI parts. How is the black finish holding up on yours? Thanks for watching! A lot more XSR content on the way.
@ridewithKY sorry, I meant black XSR 900. I have the stainless exhaust, too, but I did contemplate on going with the cerakoted one, but I like the look of the welding on the stainless one too much which swayed my judgment in the end.
Been seeing your videos intermittently since you started with the vitpilen and I can tell you're getting more comfortable and the pacing is better. I had the exact same kelpi exhaust installed for me over the weekend and I'm diggin it so far. I definitely notice the awareness change on the freeway here in SoCal especially during traffic so with that alone the purchase is worth it. Looking forward to more content!
Well thank you for continuing to watch. I guess it’s like anything else where you just get better with practice. Of course there is still much to improve on. Hopefully as I get better equipment and get better at recording/editing, the videos will continue to improve. Good to hear you are also enjoying your KELPI exhaust. It’s certainly much safer to have some kind of exhaust while commuting through traffic. Again, thank you very much for continuing to view. 🙏🏽.
@@ridewithKY btw, how's the viewing angle of the mirrors? I really like the look of the inverted mirrors but I'm constantly checking for cops since my area has a ton of ninjas with badges that sneak up on you.
@rafaelbondoc2312 any inverted mirror is not going to be as good functionally as a mirror. It’s useable for sure but you’ve got to move your head around a bit to really see where you want to see. Whereas mirrors mounted traditionally you can keep your head pretty much stationary and see everything you need to.
I have the same model except in black - had Kelpi custom make over the seat - a work of art from Kelpi - worth every dollar and transformed the look of the bike
Really awesome vid, just got the bike today from Berkeley, was wondering if you guys have to pay any import fee or taxes or anything like that? Thanks 🙏
Got you, thanks for the reply. For anyone else wondering, I’ve already spoken to the store down under and for anyone of us in US as long as the order is under $2000 ASD we should be fine.
These are S2 concept clip ons. We reflashed this one but I don’t know if it’s actually required in order to not damage the engine. We decided to do the flash just to optimize the set up. Thank you!
I have not tried the stock seat or aftermarket seat with a passenger. I would think the KELPI would be a little better for a passenger because it’s not as hard and isn’t as tall. That stock passenger portion of the seat is very square and tall.
I got myself a RaceFit full titanium exhaust, a bit loud for some (you can´t get much louder than it is), as of right now it's the only XSR900 in the world with a RaceFit system, it's not launched yet, but I was one of the first to buy the MT09 version and the only guy to put it on an XSR.
Very cool. I believe I’ve seen your bike online just from what you are describing. Racefit makes an excellent product. Have seen a few in person on various bikes. Cheers man.
Interesting video. I never considered the differences in catalytic converters. The look of the Kelpi exhaust is simply amazing and very complimentary to the look of the bike. I've considered getting it myself (got the 'stock' Akra now, but it's too quiet for my taste) but import duties were expensive. Went with a Roadsitalia exhaust instead (which is due to arrive next week). I put on my S2 windshield and passenger seat cowl on today, which also totally change the looks of the bike. I'm considering getting the Ermax Belly Pan too, although I want to fit my exhaust first to see if there's enough clearance. Anyhow, thanks for the video(s)!
Thank you. We thought it would be helpful to provide a visual for the inside of the catalytic converter. There’s a big difference in restriction when it comes to catalytic converters. A 600+ cell brick (OEM cats) is going to be very restrictive compared to a 100 or even 200 cell cat. Initially we were exploring options to de-cat the KELPI exhaust but now seeing how low the cell count is, I don’t think it’d make a difference. Glad your Roadsitalia exhaust worked out for you. I haven’t seen that one yet, but will check it out tonight. We are looking at the Ermax pan also, it kind of completes the cafe racer look for these bikes. Thanks so much for watching and for your support. 🙏🏽.
Thanks for your easy to watch and cool presentation. I enjoyed your laconic and no bullshit approach. You seem like nice people. As for Kelpi, and as Aussie I feel they are overpriced for what they offer. I took an XSR900 with a Kelpi exhaust and it rode crap……I then took a MT-09 without and wow…..so I ended up buying a new XSR900 ❤, and will keep looking for a better exhaust and flash/tune!
Thank you for the kind words. Sorry about your experience with the Kelpi exhaust on the XSR900. Enjoy the XSR900 you purchased and hope you put many miles on it.
To each their own I guess. I love the shape of the seat, so much so that I won't upgrade it because aftermarket seats don't keep that shape. I'm probably older than yall tho, and remember lusting after those early 80's motogp bikes as a pup.
I got the bronze setup from them, didn’t get a spring puller either but love it, I actually used the baffle in mine and it’s pretty loud still, gonna do the mirrors and seat from them this winter, check out the Ermak front fairing from France, it came color matched and I had to finess the fitment w the lower bars like yours but looks awesome!
Nice. You won’t be disappointed with the seat. We’ve seen that lower fairing and am certainly considering it at this point. It’ll really finish off the bike. Thank you for watching!
What size clip ons for the forks? That looks soooo dope! I have the new MT 09 coming in a few days, but this is making me second guess my decision. The only thing I didn't like about the xsr is the seat and would definitely put the clip -ons with it.
@kforeal6809 haha love to hear it! You are going to enjoy the XSR greatly and will really start enjoying it with the clip-ons. Changes the whole bike going to clip-ons.
Bike def looks a lot different. Satisfied on how everything turn out bro. Interested in seeing your thoughts on the next ride video 🔥 Had a good experience with Jock from Kelpi Custom. He made sure to answer every question I had regarding the exhaust, seat and mirrors. Great customer service.
Damn super good looking bike. I had the 2021 when I was living in U.S. but I’m in Albania now. I definitely am going to buy one now and I want to mod the same style as this .
Sorry you had to give your 2021 up. Glad this video series has been helpful to you and has assisted you in deciding what modifications to do. We are all in the same community so it’s always good to share information with each other.
I'm looking for the quietest full exhaust with VCYCLENUT tune. IS your choice it? Or did you find other systems that are a bit quieter in your research? It is very difficult to get dB numbers on various exhausts with a tune. I'm just looking for slightly more volume with the drivability of his tunes.
The Kelpi is a lot louder than stock. It does come with a DB killer, so you could use that to reduce some of the sound, however, DB killers are generally pretty restrictive. Overall if your concern is volume and you don't want it too loud then I would look elsewhere for an exhaust. Maybe if Akra has something? Akra's are generally pretty quiet.
Hey bro what handle bars do you have on there? I love the way they look, i've been debating upgrading the stock ones on my 2016 xsr900 but wonder if the lower ones are any less comfortable?
Those are s2 concept clip ons. It’s going to be a little more weight on your wrists because they are a lot lower than the stock bars. But help with the wind since you aren’t sitting so straight up and down.
bike looks crazy and i like the clip ons a lot, new exhaust sounds great too. i keep trying to decide on a daily bike that id use instead of a car, for work commute, twisties, road trips. how do you think the xsr would do? im looking at this one, or the other japanese naked bikes
Thank you! Looks much better with the modifications. Given your description I think this bio would suit you perfect. Has plenty of performance but is also relatively comfortable. For long trips I would say the wind buffering might get to be a little bit much but you can add a windscreen. The seat is also pretty hard for this type of bike so again for long road trips you may want to swap that out. For an in town or in city situation these bikes are light and nimble enough for you to navigate tight quarters easily. In the naked Japanese bike segment, this is easily the best looking. Hope that helps, thank you for watching! 👊🏽.
SC makes a good exhaust for these bikes. It’s lighter and flows a little better because it has no catalytic converter. That being said it is a louder exhaust. Last I checked the SC is more expensive. SC in my experience is also hit or miss quality. In this case I’d probably go with KELPI, but I don’t think you’d be wrong for going with SC.
@aroxas there is more control with the clip ons. Those upright handlebars are good for commuting and general use, but awkward for more aggressive riding.
Nice job and interesting to see the transformation at each stage. Out of interest do you guys have a background as mechanics or similar or are you just hobbyists? Also that garage is nicer than my actual loungeroom 😅.
Thank you so much for the compliment! We both have background in mechanical work in the automotive field, however, neither of us claim to be experts or professionals. Haha! I try to keep the garage clean, much more peaceful that way. Thank you again for watching and for your support.
It’s all relative. Totally understandable to have your position. Quality is expensive and if you consider they use a Yamaha seat chassis, it’s easy to see why it’s not the cheapest option. I’ve seen some Corbin stuff in person, the quality does not impress me.
@@ridewithKY looks like you guys are out of Sac? I’m in Chico. Just got a 2024 xsr 900. How’s the seat holding up from Kelpi? Did you guys install the shorty exhaust? Is it still doing that buzzing? Does it have a baffle? What fender eliminator kit did you use?
@tonyferreira8489 no problem man. 1. Seat is holding up, the parts from KELPI from what I have seen are high quality. 2. It is the shorty 3. It does buzz 4. No baffle 5. It’s a TST tail tidy
Mannnn, you guys have smashed this video out of the park! We're just as stoked as you are!! 😀
Thank you! Thank you so much for providing an excellent product along with excellent service. We’ve been recommending KELPI to everyone that asks. 👊🏽.
great channel !! you've done a great job on the XSR!! nice quality build. The seat looks amazing, the pipe too.. Keep them coming !
Thank you! Appreciate the positive comment. Tried to keep it clean and not overdo it. Seat is probably my favorite modification for these bikes.
@@ridewithKY Agreed I'm going to do the same for mine it was either corbin or kelpi . Have you seen the corbin seat ? i put a little cowl around the light and put regular mirrors cause those bar end made the bike like 42" wide rally hard to lane split. next is exhaust and seat . I have video of my bike on IG at the same handle as here .
I have seen the Corbin and it’s nice of course but I think I prefer the KELPI. However, anything is better than the stock seat. 😂. I’ll make sure to check out your instagram. Appreciate you sharing your experiences and knowledge.
I'm getting my xsr900 in the 2024 red colour in a few weeks and I'm for sure going to put a kelpi seat on it! They look so much better than the stock seats, truly amazing
Awesome! Can’t go wrong with Kelpi, that’s for sure. Use my coupon code: “ridewithky” for 5% off at Kelpi.
@@ridewithKY Just ordered the seat today! 👀
@Glitch_II right on! You are going to love it. Kelpi does a great job offering a quality seat for these bikes. Won’t be disappointed that’s for sure.
Great setup. I have exactly the same setup minus the clip ons and bar end mirrors, but the black model. Chuffed with the seat and the exhaust, and as you said, customer service was spot on. I'm looking forward to the next video. Great channel. 👍🏻
Great. Everybody seems to be happy with their KELPI parts. How is the black finish holding up on yours?
Thanks for watching! A lot more XSR content on the way.
@ridewithKY sorry, I meant black XSR 900. I have the stainless exhaust, too, but I did contemplate on going with the cerakoted one, but I like the look of the welding on the stainless one too much which swayed my judgment in the end.
Same. Prefer the welds to be visible on these exhausts.
Been seeing your videos intermittently since you started with the vitpilen and I can tell you're getting more comfortable and the pacing is better. I had the exact same kelpi exhaust installed for me over the weekend and I'm diggin it so far. I definitely notice the awareness change on the freeway here in SoCal especially during traffic so with that alone the purchase is worth it. Looking forward to more content!
Well thank you for continuing to watch. I guess it’s like anything else where you just get better with practice. Of course there is still much to improve on. Hopefully as I get better equipment and get better at recording/editing, the videos will continue to improve.
Good to hear you are also enjoying your KELPI exhaust. It’s certainly much safer to have some kind of exhaust while commuting through traffic. Again, thank you very much for continuing to view. 🙏🏽.
@@ridewithKY btw, how's the viewing angle of the mirrors? I really like the look of the inverted mirrors but I'm constantly checking for cops since my area has a ton of ninjas with badges that sneak up on you.
@rafaelbondoc2312 any inverted mirror is not going to be as good functionally as a mirror. It’s useable for sure but you’ve got to move your head around a bit to really see where you want to see. Whereas mirrors mounted traditionally you can keep your head pretty much stationary and see everything you need to.
@@ridewithKY That’s what I figured it could be, thanks for responding! Could be worth it still as I’ve clipped a couple of mirrors filtering…
I have the same model except in black - had Kelpi custom make over the seat - a work of art from Kelpi - worth every dollar and transformed the look of the bike
The guys at KELPI are pretty legit. Glad you got your bike looking the way you want it. 👊🏽.
Your videos deserve more likes, and the channel deserves a lot subs
Really appreciate the support man. Thank you!
Really awesome vid, just got the bike today from Berkeley, was wondering if you guys have to pay any import fee or taxes or anything like that? Thanks 🙏
There were no importation fees or taxes. Your situation may vary; I can only speak to what happened with us.
Got you, thanks for the reply.
For anyone else wondering,
I’ve already spoken to the store down under and for anyone of us in US as long as the order is under $2000 ASD we should be fine.
Great info. Thank you!
What clip-ons are you using?
Need to re-flash the ECU given the difference in exhaust airflow over stock? Great look & sound BTW.
Cheers.
These are S2 concept clip ons. We reflashed this one but I don’t know if it’s actually required in order to not damage the engine. We decided to do the flash just to optimize the set up. Thank you!
Duuuude this is siiick. Loving the bike now - congrats!
Thank you very much!
I spy a Kelpi scrambler 👁👃👁
Great vid, curious if the can will get gold a little after broken in like the headers
Thank you! Yes the can did start getting some color after some time. It doesn't get as rich of a gold as the header, but the color change did happen.
Hey man. Have you tried the stock seat and aftermarket seat with a passenger?
I have not tried the stock seat or aftermarket seat with a passenger. I would think the KELPI would be a little better for a passenger because it’s not as hard and isn’t as tall. That stock passenger portion of the seat is very square and tall.
I got myself a RaceFit full titanium exhaust, a bit loud for some (you can´t get much louder than it is), as of right now it's the only XSR900 in the world with a RaceFit system, it's not launched yet, but I was one of the first to buy the MT09 version and the only guy to put it on an XSR.
Very cool. I believe I’ve seen your bike online just from what you are describing. Racefit makes an excellent product. Have seen a few in person on various bikes. Cheers man.
Interesting video. I never considered the differences in catalytic converters.
The look of the Kelpi exhaust is simply amazing and very complimentary to the look of the bike. I've considered getting it myself (got the 'stock' Akra now, but it's too quiet for my taste) but import duties were expensive. Went with a Roadsitalia exhaust instead (which is due to arrive next week). I put on my S2 windshield and passenger seat cowl on today, which also totally change the looks of the bike. I'm considering getting the Ermax Belly Pan too, although I want to fit my exhaust first to see if there's enough clearance.
Anyhow, thanks for the video(s)!
Thank you. We thought it would be helpful to provide a visual for the inside of the catalytic converter. There’s a big difference in restriction when it comes to catalytic converters. A 600+ cell brick (OEM cats) is going to be very restrictive compared to a 100 or even 200 cell cat. Initially we were exploring options to de-cat the KELPI exhaust but now seeing how low the cell count is, I don’t think it’d make a difference.
Glad your Roadsitalia exhaust worked out for you. I haven’t seen that one yet, but will check it out tonight. We are looking at the Ermax pan also, it kind of completes the cafe racer look for these bikes. Thanks so much for watching and for your support. 🙏🏽.
This looks amazing, did you install the O2 sensor?
We did not. At the recommendation of the tuner, we deleted the o2 sensor.
Thanks for your easy to watch and cool presentation. I enjoyed your laconic and no bullshit approach. You seem like nice people. As for Kelpi, and as Aussie I feel they are overpriced for what they offer. I took an XSR900 with a Kelpi exhaust and it rode crap……I then took a MT-09 without and wow…..so I ended up buying a new XSR900 ❤, and will keep looking for a better exhaust and flash/tune!
Thank you for the kind words. Sorry about your experience with the Kelpi exhaust on the XSR900. Enjoy the XSR900 you purchased and hope you put many miles on it.
Looks sick! I just can’t believe no one has made a flat seat for the new XSR900. That’s the only thing keeping me from pulling the trigger.
Stock seat on these is pretty funky. Can’t argue with you there.
I have a 2024 xsr900 and I the only complaint I have about it is the seat.
@thesapshop Yup. Valid complaint and not unique to you. Luckily there’s some options out there that aren’t too expensive.
To each their own I guess. I love the shape of the seat, so much so that I won't upgrade it because aftermarket seats don't keep that shape. I'm probably older than yall tho, and remember lusting after those early 80's motogp bikes as a pup.
Wow! You guys did the bike right. Yamaha should be taking notes.
Thank you so much!
are you doing a tune anytime soon?
It actually has a VCYCLENUT flash on it now. I’ll be doing a ride along video soon.
@@ridewithKY subscribing now looking forward to that!
Thank you so much!
It's a nice exhaust. I went for a Zard exhaust though.
Zard makes a great exhaust for these bikes and you don’t see it often either which is cool.
@@ridewithKY The best ones in my view are Spark titanium ones. Expensive though.
@c.g.c2067 spark makes some nice exhaust systems for sure.
@@ridewithKY SC Projects ones for the Mt09 are good aswell
@c.g.c2067 agreed. SC makes some nice systems.
I got the bronze setup from them, didn’t get a spring puller either but love it, I actually used the baffle in mine and it’s pretty loud still, gonna do the mirrors and seat from them this winter, check out the Ermak front fairing from France, it came color matched and I had to finess the fitment w the lower bars like yours but looks awesome!
Nice. You won’t be disappointed with the seat. We’ve seen that lower fairing and am certainly considering it at this point. It’ll really finish off the bike.
Thank you for watching!
What color is your XSR? Need to see that bronze on the XSR to help me decide.
What size clip ons for the forks? That looks soooo dope! I have the new MT 09 coming in a few days, but this is making me second guess my decision. The only thing I didn't like about the xsr is the seat and would definitely put the clip -ons with it.
This is just the kit from S2 Concept in France so I don’t have the exact dimensions of the components. MT09 is a sweet bike too for sure!
@@ridewithKYwell I made the switch! Picked up the xsr yesterday and ordered the clip-on kit this morning 😂
@kforeal6809 haha love to hear it! You are going to enjoy the XSR greatly and will really start enjoying it with the clip-ons. Changes the whole bike going to clip-ons.
Any drone with this exhaust?
There is a little bit of drone but it’s not horrible.
Bike def looks a lot different. Satisfied on how everything turn out bro. Interested in seeing your thoughts on the next ride video 🔥
Had a good experience with Jock from Kelpi Custom. He made sure to answer every question I had regarding the exhaust, seat and mirrors. Great customer service.
Yes sir! Thanks for letting me record the process and progress for this bike. 🙏🏽
@@ridewithKY yessir! Might have a couple of things I want to do to it still. But now I’m hoping to add another bike to the fleet sooner than later 😂
If one bike is good then two is even better. 🔥.
Damn super good looking bike. I had the 2021 when I was living in U.S. but I’m in Albania now. I definitely am going to buy one now and I want to mod the same style as this .
Sorry you had to give your 2021 up. Glad this video series has been helpful to you and has assisted you in deciding what modifications to do. We are all in the same community so it’s always good to share information with each other.
I'm looking for the quietest full exhaust with VCYCLENUT tune. IS your choice it? Or did you find other systems that are a bit quieter in your research? It is very difficult to get dB numbers on various exhausts with a tune. I'm just looking for slightly more volume with the drivability of his tunes.
The Kelpi is a lot louder than stock. It does come with a DB killer, so you could use that to reduce some of the sound, however, DB killers are generally pretty restrictive. Overall if your concern is volume and you don't want it too loud then I would look elsewhere for an exhaust. Maybe if Akra has something? Akra's are generally pretty quiet.
You have the sickest collection 🔥🔥🔥
Thank you so much as always!
Do you know the size for the mirror hole plugs?
Unfortunately I don’t. We ended up just changing the whole mirror to some Kelpi’s.
Hey bro what handle bars do you have on there? I love the way they look, i've been debating upgrading the stock ones on my 2016 xsr900 but wonder if the lower ones are any less comfortable?
Those are s2 concept clip ons. It’s going to be a little more weight on your wrists because they are a lot lower than the stock bars. But help with the wind since you aren’t sitting so straight up and down.
That’s actually a really good looking bike
Especially after you lose that humongous seat. 😂.
bike looks crazy and i like the clip ons a lot, new exhaust sounds great too. i keep trying to decide on a daily bike that id use instead of a car, for work commute, twisties, road trips. how do you think the xsr would do? im looking at this one, or the other japanese naked bikes
Thank you! Looks much better with the modifications. Given your description I think this bio would suit you perfect. Has plenty of performance but is also relatively comfortable. For long trips I would say the wind buffering might get to be a little bit much but you can add a windscreen. The seat is also pretty hard for this type of bike so again for long road trips you may want to swap that out. For an in town or in city situation these bikes are light and nimble enough for you to navigate tight quarters easily. In the naked Japanese bike segment, this is easily the best looking. Hope that helps, thank you for watching! 👊🏽.
hell yeah, think I'm even more sold on this bike now. thanks for the in depth response
You won’t be disappointed. If there’s any other questions I can answer for you, please reach out. Happy to help!
I was looking at getting the SC Project but after seeing this i'm not too sure. What would you say?
SC makes a good exhaust for these bikes. It’s lighter and flows a little better because it has no catalytic converter. That being said it is a louder exhaust. Last I checked the SC is more expensive. SC in my experience is also hit or miss quality.
In this case I’d probably go with KELPI, but I don’t think you’d be wrong for going with SC.
are the clipons comfortable to ride?
Absolutely. I think it’s more comfortable with the clip-ons because the wind buffering isn’t as bad.
@@ridewithKY aright thx man
@enderzebak2863 anytime! Glad to help:
How is the handling with the clip ons on the twisties. Do you find you have more feel and control?
@aroxas there is more control with the clip ons. Those upright handlebars are good for commuting and general use, but awkward for more aggressive riding.
Nice job and interesting to see the transformation at each stage.
Out of interest do you guys have a background as mechanics or similar or are you just hobbyists?
Also that garage is nicer than my actual loungeroom 😅.
Thank you so much for the compliment! We both have background in mechanical work in the automotive field, however, neither of us claim to be experts or professionals.
Haha! I try to keep the garage clean, much more peaceful that way.
Thank you again for watching and for your support.
Very curious how much "higher" the kelpi seat feels vs stock?
It’s definitely noticeable. I’ll make sure to comment on that in the next video when I take it for a spin.
Low the bike is that a kelpi shorty exhaust love to know the name please guys..?
Correct. That’s the shorty from KELPI. Use my coupon code “Ridewithky” for 5% storewide at KELPI.
Man, I looked up one of those seats. No way, I can't do it. When a Corbin seat is cheap by comparison. You know shit is crazy.😮
It’s all relative. Totally understandable to have your position. Quality is expensive and if you consider they use a Yamaha seat chassis, it’s easy to see why it’s not the cheapest option.
I’ve seen some Corbin stuff in person, the quality does not impress me.
Sounds great
Thank you!
I have a few questions, how can I reach out via email?
Any questions you are more than welcome to ask here bro.
@@ridewithKY looks like you guys are out of Sac? I’m in Chico.
Just got a 2024 xsr 900. How’s the seat holding up from Kelpi? Did you guys install the shorty exhaust? Is it still doing that buzzing? Does it have a baffle? What fender eliminator kit did you use?
@tonyferreira8489 no problem man.
1. Seat is holding up, the parts from KELPI from what I have seen are high quality.
2. It is the shorty
3. It does buzz
4. No baffle
5. It’s a TST tail tidy
Sweet.
Thank you!
Pipe looks good, just ditch that cat lol 🙌
I agree. Not a fan of the cat.
I don't like Yamaha models. It's a gay bike. (XSR900) 🦄🫤
Z900RS is the best! 💪🏻🤠
April fools day is over man.
@@ridewithKYThe XSR 900 is made for you. 🦄🏳️🌈
Ok. 😂.
@@ridewithKY Yes! 🤣
Z900 is an excellent bike, for old geezers 😝