I'd previous Kincony boards, and thanks to you to go further. One good point to be ESP32 compliant. Another good point to be Home Assistant compliant. For me, your best point stays the RJ45 connection enbended since a long time now that brings so much security on a system. As you follow the best direction, may be you should consider that Zigbee becomes a real necessary upgrade for any installation and any of your board should implement usb plug for adding a dongle or may be a direct connection on the board to be a fully 2023/2024 advanced board.
@@KinCony of course rj45 for such a card is a real security issue. A static IP on the network through a Wired connection brings much more security than any WiFi connection
KC102 use for control Air-condition by IR is easy to use, just use tuya app. relay board can work with RS485 switch directly, just if you want write arduino code, the circuit of hardware have RS485 interface.
@@KinCony It's dual-beam infrared detectors that send signals to the alarm system when someone enters the protected range or interrupts the infrared beam.
@@tjhasina5034 i know, so just confirm your sensor output signal type, usually use dry contact output, so you can connect with A16S' digital input port, it can work.
@@xevietcorp. just download "KCS" firmware, so that will support many protocol. here is protocol document download link: www.kincony.com/forum/forumdisplay.php?fid=40
Hey man, your board desing technologies awesome. but please teach us how to design boards and share schematic for learners. we're waiting for learning! Thank you!
I'd previous Kincony boards, and thanks to you to go further. One good point to be ESP32 compliant. Another good point to be Home Assistant compliant. For me, your best point stays the RJ45 connection enbended since a long time now that brings so much security on a system. As you follow the best direction, may be you should consider that Zigbee becomes a real necessary upgrade for any installation and any of your board should implement usb plug for adding a dongle or may be a direct connection on the board to be a fully 2023/2024 advanced board.
do you think RJ45 make security issue?
@@KinCony of course rj45 for such a card is a real security issue. A static IP on the network through a Wired connection brings much more security than any WiFi connection
login board need password by RJ45 connection.@@BSOArtMagedon
simply the best!
Спасибо за обозрение продукта....
❤❤❤❤❤
Good work
I hope see products control Air-condition but shoud be easy
I hope make switches with rs485 directly no two part
KC102 use for control Air-condition by IR is easy to use, just use tuya app. relay board can work with RS485 switch directly, just if you want write arduino code, the circuit of hardware have RS485 interface.
Very nice modules sir...
thanks
The Ethernet port. Is that an POE also? That should be fantastic if it was.
E16P board support POE
Can I connect beam IR on this device?
whether your sensor output dry contact signal?
@@KinCony It's dual-beam infrared detectors that send signals to the alarm system when someone enters the protected range or interrupts the infrared beam.
@@tjhasina5034 i know, so just confirm your sensor output signal type, usually use dry contact output, so you can connect with A16S' digital input port, it can work.
How do I order the manual button board? I can't find it on the aliexpress store...
the manaul button include A16S board.
Can use C# code to control this board ?
sure, no problem
@@KinCony Good news . Can you share me SDK for C# ?
@@xevietcorp. just download "KCS" firmware, so that will support many protocol. here is protocol document download link: www.kincony.com/forum/forumdisplay.php?fid=40
Hey man, your board desing technologies awesome. but please teach us how to design boards and share schematic for learners. we're waiting for learning! Thank you!
our board is open source, you can download schematic from KinCony's webpage.
@@KinCony It’s really awesome! I’ll check man. Thank you!
Can u make a video on DALI lights...step by step programming and connection.
sorry, now hardware is not support DALI
230 volt AC possible?
connect with 230v ac load, no problem.
Is kincony product available in Philippines
we can send to Philippines
Хорошее дело... ❤❤❤❤❤
can it support kcs firmware or kbox?
can we use switches connected in DI and RF remote without internet?
it will support KCS in furture. sure, support DI for switch and RF remote without internet
@KinCony IoT Great and good board. Add KCS firmware and tuya features to it.
@@ersheikismail8293 yes, have this plan.
@@KinCony great
有电报讨论交流群吗？想学下如何搭建智能家居系统
没有
@@KinCony 也没有中文视频😂
❤ Best
Do you sell at shopee or lazada?
sorry, now only from Aliexpress
Please, make totairal about automat by esphome double click and multi click
when have free time, we can make it.
您好，请问国内如何购买？
不好意思，国内没有。
Please give AliExpress link if available
www.aliexpress.us/item/3256805284158461.html?spm=a2g0o.store_pc_home.hotSpots_2005284000828.11&gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US
👍🌺🙏