beautiful end product and some excellent ways of working to get it done, I have limited room and tools so this video is inspirational and serves as a fantastic guide to get started on a project like this, thank you. I hope you enjoy using your USB, I'm sure it gets some much deserved head turns when in use! :D
I use carpet adhesive tape. I've linked it on my amazon link page: www.amazon.de/shop/thosa then visit the list: "Verbrauchsmaterial (expendable Materials)" 😀🖐
Yes, of course, you can use pretty much any kind of wood. 🙃👍 Unfortunately, I don't know where you can still get the wood. A few years ago I found it as a sample set on ebay. At the moment I can't find the set anywhere either. 🙂🖐
hello and thank you very much. 😀🖐 I am glad that you like my work so much. But don't you want to incorporate some of your own creativity instead of copying the 1 to 1? 🙃😉 So I just took wood samples from eBay. These were patterns for wall coverings that come in 3 different thicknesses. I think they were 2, 4 and 6mm thick. I had taken maple and oak tobacco. Unfortunately I can't find them anymore. Otherwise I would have linked them to you. But you can also use any other wood. Then you need the usual 2 components epoxy glue and 6x1mm neodymium magnets. You can find the magnets here: amazon.de/shop/thosa under expendable materials. 😀🖐
Oh man! I really thought at first that you'd alternate the colors of the design on opposite sides. But still if my USB drive was sentient it would really be jealous right about now.
I don't know. I don't have this Weight anymore. 🤔 In the newer Videos (e.g. the second USB drive: ua-cam.com/video/GryL1Y5xyuI/v-deo.html ) I use a unscrewed Weight of this small 5Kg Dumbbell: amzn.to/2FeRXuT 😀🖐
this is very innovative hey...... but i would like to know if there are special adhessives that can be usd when laminating the pieces...... i would like to try one neee.
Thank you 😀🖐 No.. 😅 it was an old (USB2) and small one (2GB I think) because, it was the first Time I made this and dont want to trash a big Flash Drive. It was'nt mine. I made this for a Girl Friend. But everything works fine... Still works until today. My second Video of Casemodding an USB Drive was higher Capacity. 😀👍
thank you 😊 but honestly... no one wants to use the case any more after a few years...and any other solution (screws and so on..) makesthe housing bigger... 😉
thank you 😀🖐 ... and no.. thats wrong..😅 Flash Drives are not affected by magnetic Fields. Especially not from such small magnets. This only affects diskettes etc. where the data is stored magnetically. 😀🖐
You have kind hands who like hard work, but you don’t have a designer’s core. Install the Pinterest application, it will help you with beautiful shapes and vector drawings. Your work will become more aesthetic. Wish you success!
Hi, ich finde der USB-Stick schaut einfach nur wunderschön aus😍, aber es würde besser und moderner aussehen, wenn es rechteckig wäre (nur meine Meinung)
Me encanto!! me puedes compartir la maquinaria que usaste, hay unas que no las conozco en mi país, en verdad maravilloso, gracias por compartir. bendiciones!!!
bei meinen Videos gehts nicht immer nur um das da gezeigte.. Manches ist auch recht übertrieben und sehr aufwendig.. Ich möchte manchmal auch nur zeigen was geht, und wie man was machen kann um Ideen oder Anregungen zu transportieren.. Weist was ich meine? also vorher hatte ich auch keinen Plan wie man so ein Inlay recht simpel machen könnte, bis ich es dann irgendwo mal gesehen habe.. Diese Idee hab ich dann mit diesem USB Stick aufgegriffen... In der gleichen Technik könnte jemand anderes jetzt inspiriert werden und zB n Schneidebrett bauen...
No! This magnet has no affect on modern flash memories. The fact that magnets affect these memories is false information and dates back to the time of magnetic storage media such as floppy disks, cassettes, etc.
vielen Dank 😊🖐 Ich hab die bei eBay gefunden. Das waren Muster für solche 3D Wandverkleidungen. Da gabs 2,4 und 6mm Stücke als Muster für 2.99€ pro Holzsorte glaube ich ... 🤔
thank you 😀🖐 no... there is no Way for damaging Flash Drives with normal Magnets.. I have a very big and stron Magnet attachet to my SmartPhone to hold the Phone on any Metal Surface... And that Magnet has a few Kilogram Holding Force... Phone and all Data works perfect since many Years.... 😀🖐
por favor que laburo !!!! no se como no le prendes fuego al segundo corte, mucha paciencia, felicitaciones ! que lastima que no se puede vender esto porque nadie te compra tu laburo. me suscribo! exitos!
Wow, absolut geniale Arbeit, fantastisch, ich wünschte auch dieses Talent zu besitzen. Großartig. Bin echt neidisch, so einen USB Stick wünscht sich doch jeder als Geschenk. Einfach einzigartig, Danke für das tolle Video und weiter viel Spaß beim Heimwerken.
vielen Dank 😀🖐 Soo viel Talent ist da gar nicht von Nöten.. Wenn du dir so ein Projekt im Ganzen anschaust, dann kann einen das schnell erschlagen und sehr groß vorkommen. Teil dir so ein Projekt in viele, kleine, einfache Abschnitte ein. Konzentriere dich dann jeweils nur auf den aktuellen Abschnitt und wie du diesen am Besten hin bekommst.. So arbeitest du dich Schritt für Schritt durch das Projekt.. und auf einmal bist du damit durch und hast es fertig... 😀👍 Und dann kommt der Aha - Effekt und dass das überhaupt kein Hexenwerk war. 😉🖐
Make a long video with detail u will recieve many SUBS and views 😀 . Pakistani and indian people starts SUBS to your channel make 2 or 3 videos on cage Thank you .
Oh dont worry i have birds and now new chicks will ready to self on food that time i want to have a separate cage for chicks . If you will make a cage after that buy budgies or finch and enjoy the sounds of nature 😀
Hi, an usb-memory and also hard disks are insensitive to magnets. The claim that magnets can erase data dates back to the time of floppy disks. Modern flash memories are not affected by magnets. The only problem can be if the electronics of the USB memory and hard drives are in a changing magnetic field. Then a voltage could be induced similar to a transformer. But then a completely different size of magnet would have to be at work.
Imagine the size of the stick doesn't matter... 🤔 Imagine it's not about the stick, it's about the woodwork, the techniques... the how to... and you didn't understand it.... 😅 The videos are not about what I build, ... its more about how I build it... After the construction many things are disassembled and used again or is firewood afterwards.
What a pleasure it is to see someone building something without all the latest powertools!
thank you 😊
Handcrafted with less machine work. Well done and nice idea
thank you 😀🖐
that inlay technique is really cool. I'm planning on making something similar for my parents and grandparents for Christmas.
For example, very nice work without any expensive tools - great job !
thank you 😀🖐
This looks amazing! I really like the mix with dark wood and light wood. Good Job!
thank you 😀🖐
You have achieved the master mode. Hands down.
beautiful end product and some excellent ways of working to get it done, I have limited room and tools so this video is inspirational and serves as a fantastic guide to get started on a project like this, thank you. I hope you enjoy using your USB, I'm sure it gets some much deserved head turns when in use! :D
thank you 😀🖐 its not that hard .. just make it 😊👍
What type of tape did you use to hold the wood while cutting it? I can't seem to find and double sided tape like that.
I use carpet adhesive tape. I've linked it on my amazon link page: www.amazon.de/shop/thosa then visit the list: "Verbrauchsmaterial (expendable Materials)" 😀🖐
14:10 noot noot not noooot nooooooot not not nooot😂
children saying "no" to food - compilation
I hear it saying "NO" non-stop.
@@BenjaminMellor me too
Beautiful and I learned a sanding trick from the video so thank you for that.
perfect 👌👍😊 and thank you 😁
Excellent USB case!
thank you 😊🖐
@@thosa 😊you're welcome
nice work ,what wood did you use?and where can i buy it
thank you 😀🖐 Tobacco Oak and Maple.
I suppose any type of wood will be worth it, since I do not have those woods, nor do I know where to find them
Yes, of course, you can use pretty much any kind of wood. 🙃👍 Unfortunately, I don't know where you can still get the wood. A few years ago I found it as a sample set on ebay. At the moment I can't find the set anywhere either. 🙂🖐
The sounds were satisfying and nice job!!!!
Edit: 14:08 - 16:39 NIE NIE NI-NI-NIEE NIEE N-NIEE XD so adorable!!
😁
the next part is satisfying too
I want to do exactly your work please could you list for me the marials needed??
hello and thank you very much. 😀🖐 I am glad that you like my work so much.
But don't you want to incorporate some of your own creativity instead of copying the 1 to 1? 🙃😉 So I just took wood samples from eBay. These were patterns for wall coverings that come in 3 different thicknesses. I think they were 2, 4 and 6mm thick. I had taken maple and oak tobacco. Unfortunately I can't find them anymore. Otherwise I would have linked them to you.
But you can also use any other wood. Then you need the usual 2 components epoxy glue and 6x1mm neodymium magnets.
You can find the magnets here: amazon.de/shop/thosa under expendable materials. 😀🖐
Oh man! I really thought at first that you'd alternate the colors of the design on opposite sides.
But still if my USB drive was sentient it would really be jealous right about now.
Great Idea 🤔👍 maybe I will build another 🤓🖐
PD The Man Adniomo 👍
What is the name of the weight that you use as a press to glue the pieces?
I don't know. I don't have this Weight anymore. 🤔 In the newer Videos (e.g. the second USB drive: ua-cam.com/video/GryL1Y5xyuI/v-deo.html ) I use a unscrewed Weight of this small 5Kg Dumbbell: amzn.to/2FeRXuT 😀🖐
Ohman i love these Timelapse Sounds ^^
😅🤗🖐
Amazing video!
thank you 😀 ... but its an old one... the newest are way better 😉
this is very innovative hey...... but i would like to know if there are special adhessives that can be usd when laminating the pieces...... i would like to try one neee.
you can use normal wood glue for laminating wood.. I used a 5 minutes epoxy
...the epoxy for the electronic parts... the wood was glued with normal wood glue
Hats off for your patience and nice result... keep it up...
thank you so much 😀
Finally a reliable storage unit to store my 54 zettabyte homework folder
What is that thing called ? The one you routed out the inside with?
its a milling attachment for Dremel: amzn.to/2gPlEq6 ...very handy and usefull 😀🖐
Good job. I hope you've installed a high-capacity device.
Thank you 😀🖐 No.. 😅 it was an old (USB2) and small one (2GB I think) because, it was the first Time I made this and dont want to trash a big Flash Drive. It was'nt mine. I made this for a Girl Friend. But everything works fine... Still works until today. My second Video of Casemodding an USB Drive was higher Capacity. 😀👍
Nice! ...But how did it go from rectangular pieces to two-tone matching curves? The matching curves magically appear at 02:38 already made.
thank you 😀🖐 It's not that hard to get those perfect matched curves. 😀👍
Elegant look. Appreciable work 👍
thank you 😀🖐
I liked the wood finish very good, but I would never pass glue on the device, if it comes to defect would be easy to replace with another.
thank you 😊 but honestly... no one wants to use the case any more after a few years...and any other solution (screws and so on..) makesthe housing bigger... 😉
I even understand your logic but it's just a matter of opinion, okay!
sure, everyone as he likes 😀
For curiosity what is the name of the tool that you use to make internal roughing in the wood to place the device
Its a tool similar to a Dremel with a atachment on top to use it like a router. The attachment is linked in the description box.
Nice work...but should not have used a magnet... USB drive should be kept away from magnets to prevent data loss...👍
thank you 😀🖐 ... and no.. thats wrong..😅 Flash Drives are not affected by magnetic Fields. Especially not from such small magnets. This only affects diskettes etc. where the data is stored magnetically. 😀🖐
You have kind hands who like hard work, but you don’t have a designer’s core. Install the Pinterest application, it will help you with beautiful shapes and vector drawings. Your work will become more aesthetic. Wish you success!
Wonderful work bro
Thank you 😊 ..have fun rebuilding this.. 👍
excellent job, Sir!
thank you 😀🖐
Nice usb stick bro.
thank you 😊 ... watch also my 2nd version: ua-cam.com/video/GryL1Y5xyuI/v-deo.html 😁
World's best video on UA-cam 😘
oh thank you 😙
what saw is that? never seen like that one before..
That was a homemade saw. But luckily I have a better one for a long time and don't have to work with it anymore.
That’s awesome mate👌
thank you 🤓🖐
Excuse me may inomease know the magnet used in the video and link please
everything is linked in the video description. 😀🖐
Hi, ich finde der USB-Stick schaut einfach nur wunderschön aus😍, aber es würde besser und moderner aussehen, wenn es rechteckig wäre (nur meine Meinung)
ja.. mittlerweile fände ich eckig auch schöner 😊
this is inspiring me! thanks!
that's great 👍 goal of the video achieved 😀
3:59 that jig 🤘
Cool idea, i'm inspired!
how are you supposed to safely eject your usb when you cant even see the led indicator now because the wood is blocking it :(
windows explorer - right click on usb drive - eject - wait until balloon message right bottom say.. now it's save to remove... 😉
Great idea ! Nice job
thank you 😊
what magnet did you use?
Neodym Magnet 6x1mm 😀🖐
@@thosa thank you.
What is the name of this tool 5:17 ?
the routing adapter is that one: amzn.to/2gPlEq6 The machine is a dremel compatible multi routing tool.
ok, thank you
What kind of router do you use?
a low budget no name router 1200W for 20€ mounted under the table. the one hand router is a low budget copy of the makita version 😭
the small router in the usb video is a 30€ no name dremel copy
thosa thanks
nice flashdrive 👍👏
😊🖐
Me encanto!! me puedes compartir la maquinaria que usaste, hay unas que no las conozco en mi país, en verdad maravilloso, gracias por compartir. bendiciones!!!
vielen Dank 😊🖐
Please give a pendrive case also. As i m your subs and your member of family
sieht sehr sehr schick aus, mir wär der Aufwand für so ein kurzlebiges Teil allerdings zu groß. zumbel drum und gut
bei meinen Videos gehts nicht immer nur um das da gezeigte.. Manches ist auch recht übertrieben und sehr aufwendig.. Ich möchte manchmal auch nur zeigen was geht, und wie man was machen kann um Ideen oder Anregungen zu transportieren.. Weist was ich meine? also vorher hatte ich auch keinen Plan wie man so ein Inlay recht simpel machen könnte, bis ich es dann irgendwo mal gesehen habe.. Diese Idee hab ich dann mit diesem USB Stick aufgegriffen... In der gleichen Technik könnte jemand anderes jetzt inspiriert werden und zB n Schneidebrett bauen...
¿El magneto de la tapa, no destruye la informacion en el USB?
no...
@@thosa ok, I'm don't know much about memory cards. I trust you.
Wow ur so good in making stuff!!
thank you so much 😀
Np!
The ima will not change the operation of the pendrive with the passage of time.
Great work!
thank you 😁
I could swear I heard my ex talking at 14:12
😂👍
is it waterproof? Cz the glue covered it all!
😅👍 no.. I don't think so. 😊🖐
un trabajito muy delicado me gusto gracias profe un abraso desde uruguay
vielen Dank 🤗😀🖐
Does magnet damage the information on it
No! This magnet has no affect on modern flash memories. The fact that magnets affect these memories is false information and dates back to the time of magnetic storage media such as floppy disks, cassettes, etc.
@@thosa thanks
Parabens uma verdadeira obra de Arte.
vielen Dank 😀🖐
Oh that's awesome dude
Great job ! 👍👍👍
thank you 😀🖐
nice and very good work
thank you 😀🖐
Great work man. Love from Bangladesh 🇧🇩
thank you 😀🖐
Awesome, I love this
thank you 😊
Очень приятно смотреть, крутая работа.
спасибо 😀🖐
Why glue the board's stick to the wood? Won't it damage it?
To make it hold. No, there's Electronics molded into Epoxy to make it waterproof. 😀🖐
wil je er een maken voor mij van 64 gb
Beautiful gadget!
thank you 😀
That's really cool!
thank you 😀🖐
very nice project and good idia
thank you 😀
Pas mal du tout ! Bravo !
vielen dank 😊🖐
Sehr schöne Arbeit 😁👍🏻
Kannst du mir sagen wo ich am besten die holzplatten herbekomme? Vor alle Eiche Tabak.
vielen Dank 😊🖐 Ich hab die bei eBay gefunden. Das waren Muster für solche 3D Wandverkleidungen. Da gabs 2,4 und 6mm Stücke als Muster für 2.99€ pro Holzsorte glaube ich ... 🤔
Lovely!!!! it is rather easy to do if u have the right tools but its awsome!!
thank you 😊🙋♂️
Thats awesome but why not make it to where you can take electronics out easily?
Thank you 🙂 How often do you have to take the electronics out of your USB sticks? and why? 😉
sometimes they break. I just thought after all that work you would want to reuse it.
it wasn't as much work as it seems. 🙂
very nice! but is it working after all? :)
thank you 😀🖐 Yes, both USB Sticks are working well (the second one: ua-cam.com/video/GryL1Y5xyuI/v-deo.html ) 😀🖐
14:11 ohhh So cute 🙂🙂🙂
😊
Beautiful work. Is there no chance that the small magnet will corrupt the data on the drive?
thank you 😀🖐 no... there is no Way for damaging Flash Drives with normal Magnets.. I have a very big and stron Magnet attachet to my SmartPhone to hold the Phone on any Metal Surface... And that Magnet has a few Kilogram Holding Force... Phone and all Data works perfect since many Years.... 😀🖐
Solid state storage does not use magnets to store data. Has no affect.
Magnets affect Hard disk drives only, not Solid state drives.
por favor que laburo !!!! no se como no le prendes fuego al segundo corte, mucha paciencia, felicitaciones ! que lastima que no se puede vender esto porque nadie te compra tu laburo. me suscribo! exitos!
thank you 😀 and welcome 😀
magic job I like it
thank you 😊👍
Very nicely executed... i enjoy watching and i always learn something from your videos.. Keep it going. Best regards.
thanks a lot 😀🖐 have Fun with my upcoming Videos 😀🖐
Wow, absolut geniale Arbeit, fantastisch, ich wünschte auch dieses Talent zu besitzen. Großartig. Bin echt neidisch, so einen USB Stick wünscht sich doch jeder als Geschenk. Einfach einzigartig, Danke für das tolle Video und weiter viel Spaß beim Heimwerken.
vielen Dank 😀🖐 Soo viel Talent ist da gar nicht von Nöten.. Wenn du dir so ein Projekt im Ganzen anschaust, dann kann einen das schnell erschlagen und sehr groß vorkommen. Teil dir so ein Projekt in viele, kleine, einfache Abschnitte ein. Konzentriere dich dann jeweils nur auf den aktuellen Abschnitt und wie du diesen am Besten hin bekommst.. So arbeitest du dich Schritt für Schritt durch das Projekt.. und auf einmal bist du damit durch und hast es fertig... 😀👍 Und dann kommt der Aha - Effekt und dass das überhaupt kein Hexenwerk war. 😉🖐
sehr edel ..klasse Arbeit ! Danke für's Zeigen .
vielen Dank 😊🖐
Amazing ❤ i am in love with this, i think i should also have to try 😍
thank you 😁 yes you should... It was easier than I thought.
thosa thank you i love that ❤ it is dam cool ❤👌 we can also write our names using laser ❤
Make Wooden Thanos Gloves ! Everyone will be excited !
😅👍
Can you build one for me, I want a usb that last for a long time, I don't have the skills and the tool, i just want to have one like that
hi, sorry, I dont have time to do such commissioned works. 😟
Can u make an east budgies cage which can everyone make at their homes ?
Make a long video with detail u will recieve many SUBS and views 😀 . Pakistani and indian people starts SUBS to your channel make 2 or 3 videos on cage
Thank you .
that sounds nice... 😀🖐 but I dont have any birds
share what you can 😅👍
Oh dont worry i have birds and now new chicks will ready to self on food that time i want to have a separate cage for chicks .
If you will make a cage after that buy budgies or finch and enjoy the sounds of nature 😀
in this process, my USB broke but great work!
thank you 😀🖐 that is a pity, but the possibility must always be considered. 😀🖐
Hola muy bueno tu trabajo, que madera usas?, la que es mas oscura la teñiste antes?
hi, thank you. 😀 I've ordered it as "oak tabak" .. I dont know if this is original that dark...
very very thanks!
thanks for watching 😀
wouldnt a magnet and a flash drive kinda not play together well? im being serious i honestly am asking
Hi, an usb-memory and also hard disks are insensitive to magnets. The claim that magnets can erase data dates back to the time of floppy disks. Modern flash memories are not affected by magnets. The only problem can be if the electronics of the USB memory and hard drives are in a changing magnetic field. Then a voltage could be induced similar to a transformer. But then a completely different size of magnet would have to be at work.
well... Im into electronic development.. and never heard of a case like that... but anyways... then dont use a magnet for that...
this actually helped me, thanks so much!! love your work!!!
Amazing GOOD work
thank you 😀
Loved this pure god at this
thank you 😀🖐
très jolie finition!! mais tout ce temps pour une clé que tu ne pourras pas changer car elle est collé
In this case, I didn't want it to be replaceable, but rather smaller. If you try to make something like this changeable, it will be bigger sized.
It's real awesome buddy ...nice hardwork bro😘😘😘
thank you 😀🖐
wow bro beautiful pendrive
thank you 😀
It's very nice but vert soon.
It will be useful to understand a little to come.
thank you for your feedback 🙋♂️
Geile Idee, sieht gut aus! / Cool Idea, looks great!
vielen Dank 😊
Imagine that this job is done for 1 Gb usb stick....
Imagine the size of the stick doesn't matter... 🤔 Imagine it's not about the stick, it's about the woodwork, the techniques... the how to... and you didn't understand it.... 😅 The videos are not about what I build, ... its more about how I build it... After the construction many things are disassembled and used again or is firewood afterwards.
You are totally right man, just a little bit of humour.
Cant tell is it self made or bouth from store
as you can see.. I made it...
respect for you😘😘👌👌👍👍👍💟💟💟👏👏👏🎓🎓🎓💰💰💰💰💲💲💲🔔🔔🔔🎆🎆🎆🎆📣you📣are📣the📣best📣👈👈👈👈👈🌷🌷🌷🌹🌹🌹💒💒💒🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜🔚🔜
thank you 😊
That's beautifull
Build a flash drive shell in the shape of an pendant
you can build any shape you wand 😉