Kitchen Faucet Sprayer Wont Switch to Stream
Вставка
- Опубліковано 6 сер 2022
- How to fix a kitchen faucet sprayer that won't switch between stream and spray.
If you'd like to support the channel, you can do so by shopping for tools or whatever you need on AMAZON at no extra cost to you through this link,
amzn.to/3cl1sMn
Tools That Can Make You Easy Money: www.dirtymaintenancenation.co...
If I've provided any value for you and you'd like to donate $1.00 or more into my online tip jar, you can do so through this link, (all cards accepted)
squareup.com/store/dirty-main...
Friend me on Facebook! dirtymainten...
This page contains affiliate links, which means that if you click on the link and make a purchase, I’ll receive a small commission at no extra cost to you. Lex Vance is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon .com
#propertymanagement #maintenancetechnician #multifamilyhousing #apartmentmaintenance #handyman #Tallahassee - Розваги
Tools That Can Make You Easy Money: www.dirtymaintenancenation.com/diy-tools-for-men/
If you'd like to support the channel, you can do so by shopping for tools or whatever you need on AMAZON at no extra cost to you through this link,
amzn.to/3cl1sMn
If I've provided any value for you and you'd like to donate $1.00 or more into my online tip jar, you can do so through this link, (all cards accepted)
squareup.com/store/dirty-maintenance-nation
This page contains affiliate links, which means that if you click on the link and make a purchase, I’ll receive a small commission at no extra cost to you. Lex Vance is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon .com
Here's a tip that helped me fix my Moen faucet. I tried the advice in the video and pulled the spring apart, reinstalled everything, turned on the water, and it was better but it was still spraying on both sides at the same time (stream and main sprayer). I uninstalled the sprayer head again and took everything apart, but this time I took the good spring from the top button and switched it over to the bottom button, and vice versa. This fixed my problem. On my faucet the top button just shuts off the sprayer water completely. I never use that feature, so I'm fine if the top button has the damaged spring. Thanks for posting this vid and showing everyone how to disassemble the faucet head.
Thank you so much for watching!
This video demonstrates such a 'backyard mechanic' type of approach and hence solution (minus the gloves of course). The real and only reason that the valve is sticking closed is that it has lost its lubrication, silicone grease, so just take the valve apart and throw some in there. Springs are tempered so that they can maintain their characteristics for tons of cycles. Manually stretching them pretty much eliminates that and though the compromised, stretched spring may provide more force to overcome the lacking lubrication in the short term, it will not last very long and will now definitely need to be replaced!
Thank you so much! I am female who doesn’t have much knowledge when it comes to this matter but I always curious on things. You are my life saver today. I successfully fixed our faucet because there is no water come out Both regular and spray. I followed your steps, and it works awesomely!
Thank you so much for watching!
Thanks Lex. My faucet is doing this and I was going to replace it today. This saved me a few dollars. Keep the videos coming.👍
Awesome! Thank you so much for watching Frank!
Awesome video man, I also added silicone faucet grease to all the o-rings and slide surfaces and have not had anymore issues
Awesome! Thank you so much for watching!
I did it without wearing gloves, cause I'm a rebel.😂 Thanks.
👍😆👍 Thank you so much for watching!
Hey big dog another easy money repair. Your videos are very interesting and clever. Learning how to fix things around the house. Thanks!
Right on Terry! Thank you so much for watching!
Im a big fan of repair instead of replace, even if the new one is only 20 bucks.
This fixed my problem, thanks man
Thank you so much for watching!
Thanks for all of your videos Lex! Keep ‘em coming!
Thank you so much for watching Rob!
The wealth of knowledge you possess is astounding. Thanks for sharing it.
Thank you so much for watching Brian!
Thanks Lex. I've never seen a faucet sprayer being serviced before. Looks easy after seeing the video.
Thank you so much for watching LoveTheSun!
Thank you for this video. This happens often, and I was sick of calling the landlord. I just fixed it myself. 😊 I appreciate you!
Nice fix! Thank you so much for watching!
thank you so much! I was able to fix my new granite glacier bay spring (button) that was stuck on spray WITH YOUR HELP!!!!! The stream was no longer working after 2 months. THANK YOU! THANK YOU! THANK YOU!!!
Nice fix , Heather! Thank you so much for watching!
Thank you so much for your video. I fixed my faucet easily just like you showed me!!!😊
Nice fix, Faith! Thank you so much for watching!
Thank God for this video. Exactly what I was looking for!
Awesome! Thank you so much for watching, Ned!
Another fix under your belt, at least there’s no blue stuff involved in this fix. Lol. Good job! Thanks for sharing!
Thank you so much for watching Phillip!
God, I have 25 years in industrial maintenance and 10 in property maintenance and this sprayer assembly had be stoked. Who would think that the 2 switches pull out ?! I guess I was expecting something more heavy-duty beside friction fit. 😂
Thank you so much for watching!
Thank you just fixed our faucet for the first time in 34 years! Housewife from TX
Nice fix! Thank you so much for watching!
Exactly the video I needed. Thank you!
Thank you so much for watching!
Wow , neat little trick ... You learn something every day ... Thx ...
Good to hear from you Eddy!
Thank you sir... we were just replacing them at high numbers.. now things will change 😆.. thanks for sharing 👍
Thank you so much for watching Rudy!
Thanks a millions. All easy fixed! 🥰🥰🥰
You're welcome Judy! Thank you so much for watching!
I am my own maintenance today 💪🏾 will try, thanks
Thank you so much for watching S M!
Very helpful- thanks for the video!!
Thank you so much for watching Bob!
I appreciate this info! Am going to attempt this today in my house ( flipped rental.) 🙏🙏Never have I ever had to fix anything sooo 😬 Thank uuuu and YT 😂😂
Thank you so much for watching!
While popping off the buttons they broke slightly and I lost a little bit of plastic on each of them but luckily they clicked back in and seem stable enough. If those buttons are the only parts I have to repair no biggie. This video helped a lot thank you!
Thank you so much for watching!
Thanks for the video! It was a quick and easy fix
You're welcome! Thank you so much for watching!
Appreciate the tutorial, saved me some money =)
Thank you so much for watching Shuga!
We’re visiting my sister in law and her faucet just quit working , I did this and now it’s working fine , THANK YOU
Nice fix! Thank you so much for watching!
Thanks for the info on how to remove the head. I didn't want to take it apart without trying something easier. I soaked the head in vinegar for 3 hours and then scrubbed off the left over minerals with a toothbrush. It works again and looks brand new.
Thank you so much for watching!
Thank you very much. I needed to find out how to. Appreciate bro ❤
You're welcome Shania! Thank you so much for watching!
This is exactly the video I needed to fix my faucet. Thank you
You're welcome! Thank you so much for watching!
Thank you so much for the video 💪
Thank you so much for watching Chizo!
You can also get some faucet grease and apply it to the rubber washers on both button valves. Just repaired mine but I didn’t need to stretch the spring. Thanks for the video 👌🏼
Thank you so much for watching!
Our rental Moen (ASME) model a112.18.1m less than 2 years old rendered the top button in-operable. Slightly different style than above but managed to get the cylinder out and stretched both springs. We are on a water filtration system so no sludge or calcium whatsoever. Yahoo! Thanks a bundle.
Awesome! Thank you so much for watching!
My facet looks different but close enough to yours. Thank you stretching the springs out fixed it!
Nice fix! Thank you so much for watching!
Have a totally different faucet but the spring was not on. Wouldn't have known to even look for a spring ... thanks !!
Thank you so much for watching!
Thanks so much, live saver!
You're welcome John! Thank you so much for watching!
Wow, this was very helpful, thank you !
You're welcome! Thank you so much for watching!
Awesome video! Thank you!
Thank you so much for watching!
Appreciate it! I had the same faucet, same issue
Thank you so much for watching!
Whew!!All fixed!😅 Thank you!
You're welcome! Thank you so much for watching!
Super helpful amigo
Thank you so much for watching Bill!
In a perfect world your employer would use your videos as proof of the advantages of renting from your apartments and would compensate you for the added value you provide.
I agree! Thank you so much for watching Big N8!
Saved me 100.00 thank you
I love it! Thank you so much for watching Melodye!
Perfect. Did the trick exactly.
Awesome! Thank you so much for watching T!
This really works!
Awesome! Thank you so much for watching!
Lex doing surgery on that faucet sprayer I love it. Only see those sprayers at the nicer properties.
Thank you so much for watching Dc!
Thanks for video excellence
Thank you so much for watching!
And you, my friend, are a true hero🫡
Thank you so much for watching!
thanks lex stuff looks easy to break if you're not careful
Thank you so much for watching Tom!
Good job!
Thank you so much for watching Dan!
@@LexVance You are welcome!
Yay,,,, way to go!
Thank you so much for watching!
Lex I don’t care what your wife says you da man! LOL 😂😂 great video TomC.
👍😆👍 Thank you so much for watching Tom!
Love it
Thank you so much for watching!
This was great. What kind of wrench - or precaution - did you use to loosen the sprayer head from the hose without scratching the chrome?
Most just hand tighten on and off. No wrench needed. Channel locks will do though if you need pliers to get it off. Use a rag to wrap it so it won't get scratched. Thank you so much for watching!
Awesome! Does the spring have a part number?
It probably does. You might have to try to call the manufacturer, reuse the current one by re-stretching it or just use another similar size/tension spring.
Yes, you would need to find it online or call the manufacturer. Good to hear from you Gator!
I saw the white calcium on faucet spout what do you recommend for that
Thanks & subscribed 🎉
I take the rough side of a sponge and wipe it off. I believe CLR will take it off if it's hard to get off. Thank you so much for watching Mauna!
Mercy thanks that was fast💥
I’ll try it👍🏼
Soak entire head in white vinegar. Place in baggie with rubber hand holding it on tight, so the head is fully submerged. Soak for a few hours, or even overnight, scrub with brush, and most or all should come off.
I have a pulldown faucet similar to the one in your video. When I turn the water on it defaults to sprayer. Can I change it to default to a stream when turning on instead?
I don't think so. It may need replacing. It screws off and a new screws back on. They're not much money. Thank you so much for watching!
Hope you’re having a good day Lex. I have a question for you since you have way more experience than me. When is it time to find a different property to work on? I’m at a 20 year old property, I’m the only tech. Supervisor is always busy or out with health issues. Company isn’t finding any employees to help out. Place is falling apart because previous maintenance weren’t doing their job correctly. Do I stay and try to fix this place or do I find something easier for me?
If I were you, I would leave. Google 4 and 5 star properties and go apply at them. That's what I did. 4 and 5 star properties are usually taken care of. Everyone is looking for a good tech now days so you shouldn't have any problems getting hired. Thank you so much for watching Mike!
@@LexVance thanks for getting back to me so quickly, I really appreciate it. I’m leaning towards leaving. Stuck here alone today and forced to go back on call cause supervisor has health issues. I feel like I’m working in quick sand at this place.
Can you tell me how to disassemble a Delta pull down sprayer? Mine drips on both settings and I feel like it may be due to the same thing going on with the spring.
I'd need to be there.
Genius
Good to hear from you Michael!
Any advice if both stream and spray are running at the same time. Buttons appear to be working but faucet won’t switch when pushed.
I'd replace the sprayer and be done with it. Thank you so much for watching David!
@@LexVance Thank you, I appreciate your help!
A quick question if anyone knows. I have an ac unit & when the sun hits it the compressor won’t kick on until I hose off the coils a little then works fine. My fan seems like it’s moving slow. Could the fan be the issue.
Sounds like the fan isn't keeping it cool and the compressor is shutting off because it gets too hot. I hope everything works out for you This Guy! 🤞
@@LexVance Appreciate the response. Thank you.
Qik question: About how long does this fix typically hold up for, before it needing to be tuned up again? Thanks.
I've got some I did 2 years ago that are still going good.
@@LexVance excellent. Just doing a mental cost/benefit analysis of a quick repair vs a replacement, based on longevity of the qik repair. Def seems like the quick repair is worth a first try... Thanks!
@@LexVanceWhen you say two years, is that by doing what you did to the spring to when you end up replacing the spring? Or is it from replacing a spring to when you need a new sprayer? Thanks!
Well…I was almost there…didn’t know the buttons just pop off. Thanks!
Thank you so much for watching!
Mine's a single button. I'll try this today. Any advice? Thanks mate
I hope everything works out for you! 🤞
@@LexVance tysm sir 😊🙏
Will this help if I still have a low flow of stream when I use the spray?
No, you may need a new sprayer. Or to try and clean it out due to partial blockage.
@@LexVance Thanks for the reply, even though I was hoping for a different answer.
I have a Kraus but I think the sprayer body may pop out the same way. For the life of me I couldn't figure out how to get it apart!
Thank you so much for watching!
Locknut 👍
That's it! 😆 Thank you so much for watching C Deese!
when i fixed everything’s and put it back small streams of water came out where you attach/detach the hose and faucet head
Oh no. Unscrew and make sure the gasket is on correctly.
👍🤘
Good to hear from you Joe!
Can’t get the housing off of mine to get to the buttons. The buttons will not depress far enough for me to remove the housing.
Sometimes I have to push the pull a little to get them out. I don't get too rough but I do get a little rough. 😆
😊
Thank you so much for watching!
Life hack, I took all the parts off and put in a jewelry cleaner with multi use CLR and watched the rust and calcium just fall off
Awesome! Thank you so much for watching!
They don’t even sell single function sink heads anymore because they want people to just keep replacing them when they malfunction
So true! Thank you so much for watching!
i usually buy another house.
👍😆👍