You need to go into ports and pins and go to output signal I think and scroll down and see if you estop is active have you also set your motor pins for each axis ?
I noticed you have wrong wired the driver to the control board. The + com is correct. The terminal CPX (in the controlller board) is Pulse in X axis. DIX is Direction y X axis. You wired CPX to DIR (direction) and DIX to PUL (pulse) in the driver. You must swap the wires. And in Mach3, Ports an Pins, Input Signals menu, uncheck the E-Stop to disable the Emergency stop. Or intall a E-Stop switch to the control board.
Hey first off thanks for the reply. And I just now. Like 5 minutes ago got it talking. It was the wrong plugin. I had the NVUM-f.dll. but am using the Novusun.dill and it seems to be communicating. I dont have motors or anything hooked up yet(I'm at work atm), but do have Estop jumped and mach is responding to it. So I hope it's a go.
good afternoon my friend what is the difference of this NVUM controller for the other models which would be the advantages could help me pos i will assemble a cnc milling machine and wanted to know which would be the best choice for the controller.
Did you fix the problem? I’m having the same problem. The nvum was working in combination with an other driver but when upgrading to stronger motors I needed stronger drivers and I can’t get them to work via the nvum
Can I ask if you had to do anything special to get mach3 to talk to the nvum? My computer tells me it is plugged in. Mach asks if I want to use that board, but its not talking to it at all. Do I need to change my port address? Or do something else? I'm running windows 10. Please help! Haha
Okay what version of this do you have? Ive used V1 and V2 Both ones were USB? If v2 you need the correct Plugin? what plugin are you using? and what board? I keep reading USE WINDOWS 7 32 Bit so i bought an older PC, And kept crashing when trying to motor tune, Then after getting so stressed i decided to use my supermax computer lol, my good PC And its 64 bits, windows 10 and guess what WORKS AWESOME NOW! I using board V2 USB and "always use a sheilded USB Cable dude! does help! SOOOOOOOOOO Windows 10 64 bit pc MACH 3 OCTOBER 2018 Works good!!!!!!!!! with this USB NOVUSUN V2 Board!!!!! they have crap CUSTOMER SERVICE!!!!!!
Ive got the exact same problem with the NVUM controller. Multiple plug - ins. Some allow me to turn off the emergency software switch, some do not. None will connect to the board. Any advise?
I have bought the controller and it's the worst controller ever..... 1- machine stops erratically, 2- the code jumps around while running in single block mode 3- sometimes loses communications with the computer 4- Soft Limits doesn't work 5- Limits Override Doesn't Work 6-Home and Limit Switches can't be shared 7- mach3 hang when the communication is lost and does not reconnect when restarting the controller which forces you to close mach3 and reopen with totally new coordinates can you please help ...?
Dear Friend Since this is my first time machine build as my hobby work , Im totally confused and im unable to move further for the wiring connectivity keep struggling for months together. Circuit details are mentioned below: drive.google.com/file/d/1_IuZ-v6f-_miTbLGiF32APHCt3QlDyxj/view?usp=sharing drive.google.com/file/d/1dmS5E3u6RNah3BvIpGG63xow9JXQuX90/view?usp=sharing Considering on the above circuit details , Kindly give the answer / guide /solution for each of the below question: 1) Im planning to operate the control board to make both the functional machine 1) orientable- Spindle machine 2) orientable - Table Machine { both the METHODOLOGY detail i have mentioned in the attached drawing in right bottom} , is it get operate in this method? 2) OPTION-1 as a Orientable -Spindle Machine = X- Axis / Y- Axis / Z- Axis / A-Axis (as a 4th axis) / B-Axis (as a 5th axis ) and W-Axis (as a 6th axis) basically where spindle alone will take action of move (up & down) ( front & Back), in the position of spindle body dependence on the effect of A-Axis & B- Axis . in this case can i take a control terminal from C Axis? or there are some other options available ? or its not possible? For your better understanding im attaching a machine detail with considered axis. 3) OPTION-2 as Orientable-Table Machine = X- Axis / Y- Axis / Z- Axis / B-Axis (as a 4th axis) / C-Axis (as a 5th axis ) . is it correct? 4) For OUTX connection , What is the capacity of relay needs to use for this complete setup? plz provide me the product link its possible. 5) What is the capacity of POTENTIOMETER needs to connect for this complete setup? plz provide me the product link its possible. 6) MPG wiring connections are correct? ( MPG product link - www.aliexpress.com/item/NVMPG-CNC-6-Axis-MPG-Manual-Pulse-Generator-with-Handwheel-LCD-Mach3-Only-use-our-company/32833573978.html?spm=a2g0s.9042311.0.0.nfVxqg ) 7) VFD wire connection is correct? if any thing needs to add or if some thing is wrong plz guide me how to connect.(simple hand sketch also fine) (product link - www.aliexpress.com/item/Free-shipping-Spindle-Inverter-1-5KW-220V-for-CNC-Router-frequency-converter-1500W-fixed-with-1/2006873999.html?spm=2114.13010608.0.0.moeUKz ) 8) Im planning to make a physical HOMING & LIMIT SWITCH for the all 6 Axis ( X / Y / Z / A / B / C ) , in this case in manual there is one number of limit switch where shown, but im having 12 numbers , plz guide me how to connect? (simple hand sketch also fine) 9) If im using PROXIMEY limit switch means, how i can connect for all 6 Axis ? 10) In SPINDLE S-AXIS - ( INDEX ) Is this terminals not required to connect anywhere? If this terminals needs to have connection ? where to connect? 11) In OUT PORT ( OUT-4 , OUT-6 , OUT-8 , OUT-10 , OUT-5 , OUT-7 , OUT-9 ) which and are all the terminals not required to connect anywhere? which and are all the terminals needs to have connection ? where to connect? 12) In MPG ( 10X , E-STOP , B-IN , Z-IN , X-IN , 100X , 1X , C-IN , A-IN , Y-IN , GND ) which and are all the terminals not required to connect anywhere? which and are all the terminals needs to have connection ? where to connect? 13) In 12-32Vin = shall we go a head with 36V power supply ? If you can able to give teh product link will be much helpful. 14) Communication external interface terminal ( white plug with 4 connecting lead) where to connect? what its purpose? in manual also no detail available. 15) In INPUT PORT - ( INP-3 , INP-4 , INP-5 , INP-6 , INP-7 , 12V , INP-8 , INP-9 , INP-10 , INP-11 , INP-12 , GND 1 ) which and are all the terminals not required to connect anywhere? which and are all the terminals needs to have connection ? where to connect? 16) Kindly give the list of power supply unit for the complete set 17) Can we use this Control board for the plasma cutting machine too? Request you to help me out to complete this project.
@@caturskak6936Sir . I am student.plz help ..i purchased nvem ethernet controller to make the engineering final year project but the received controller is not working..means after connecting the ethernet cable it doesn't show any connectivity to the computer plz plz help..
You need to go into ports and pins and go to output signal I think and scroll down and see if you estop is active have you also set your motor pins for each axis ?
I noticed you have wrong wired the driver to the control board. The + com is correct. The terminal CPX (in the controlller board) is Pulse in X axis. DIX is Direction y X axis. You wired CPX to DIR (direction) and DIX to PUL (pulse) in the driver. You must swap the wires. And in Mach3, Ports an Pins, Input Signals menu, uncheck the E-Stop to disable the Emergency stop. Or intall a E-Stop switch to the control board.
Hey first off thanks for the reply. And I just now. Like 5 minutes ago got it talking. It was the wrong plugin. I had the NVUM-f.dll. but am using the Novusun.dill and it seems to be communicating. I dont have motors or anything hooked up yet(I'm at work atm), but do have Estop jumped and mach is responding to it. So I hope it's a go.
I Will do a new video soon with mine all working :)
That would be cool. I thought about doing one too just so some more info is out there.
Did you get your index working? I have mine set like it said to port1 pin 0. And I can't get anything to happen Reguardless.
good afternoon my friend what is the difference of this NVUM controller for the other models which would be the advantages could help me pos i will assemble a cnc milling machine and wanted to know which would be the best choice for the controller.
I have a Nvum v2 4AXIS Controller. And it is asking for a bin flie. Is there anyway I can fix this can you help
You could try to connect the pulse to pulse, not the dir. And vice versa
But Mine is not working either.
Let me know , if you got it working.
Thanks.
Did you fix the problem? I’m having the same problem. The nvum was working in combination with an other driver but when upgrading to stronger motors I needed stronger drivers and I can’t get them to work via the nvum
Did I just watched a war documentary?
Hi, did you fix it? I have the same problem!! Can you tell me the solution? please!!! Thank you!!!
Can I ask if you had to do anything special to get mach3 to talk to the nvum? My computer tells me it is plugged in. Mach asks if I want to use that board, but its not talking to it at all. Do I need to change my port address? Or do something else? I'm running windows 10. Please help! Haha
Okay what version of this do you have? Ive used V1 and V2 Both ones were USB? If v2 you need the correct Plugin? what plugin are you using? and what board?
I keep reading USE WINDOWS 7 32 Bit so i bought an older PC, And kept crashing when trying to motor tune, Then after getting so stressed i decided to use my supermax computer lol, my good PC And its 64 bits, windows 10 and guess what WORKS AWESOME NOW! I using board V2 USB and "always use a sheilded USB Cable dude! does help!
SOOOOOOOOOO Windows 10 64 bit pc MACH 3 OCTOBER 2018 Works good!!!!!!!!! with this USB NOVUSUN V2 Board!!!!! they have crap CUSTOMER SERVICE!!!!!!
Ive got the exact same problem with the NVUM controller. Multiple plug - ins. Some allow me to turn off the emergency software switch, some do not. None will connect to the board. Any advise?
HI Justin im still doing tests, ive read you need to tune the motors in MACH3, I havent done this yet, will update soon
Hi, good job to vídeo, you have driver from download to nvcm ? Thanks
More or less will be uploading a new working video in 72 hours! get subscibed he he
I have bought the controller and it's the worst controller ever.....
1- machine stops erratically,
2- the code jumps around while running in single block mode
3- sometimes loses communications with the computer
4- Soft Limits doesn't work
5- Limits Override Doesn't Work
6-Home and Limit Switches can't be shared
7- mach3 hang when the communication is lost and does not reconnect when restarting the controller which forces you to close mach3 and reopen with totally new coordinates
can you please help ...?
what one do you use now? my ox cnc is built still to do all the elctrical work, hopefully soon and i will try these chinese bits
I'm using USB break out card for now
Change the different plug-in try。
Dear Friend
Since this is my first time machine build as my hobby work , Im totally confused and im unable to move further for the wiring connectivity keep struggling for months together.
Circuit details are mentioned below:
drive.google.com/file/d/1_IuZ-v6f-_miTbLGiF32APHCt3QlDyxj/view?usp=sharing
drive.google.com/file/d/1dmS5E3u6RNah3BvIpGG63xow9JXQuX90/view?usp=sharing
Considering on the above circuit details , Kindly give the answer / guide /solution for each of the below question:
1) Im planning to operate the control board to make both the functional machine 1) orientable- Spindle machine 2) orientable - Table Machine { both the METHODOLOGY detail i have mentioned in the attached drawing in right bottom} , is it get operate in this method?
2) OPTION-1 as a Orientable -Spindle Machine = X- Axis / Y- Axis / Z- Axis / A-Axis (as a 4th axis) / B-Axis (as a 5th axis ) and W-Axis (as a 6th axis) basically where spindle alone will take action of move (up & down) ( front & Back), in the position of spindle body dependence on the effect of A-Axis & B- Axis . in this case can i take a control terminal from C Axis? or there are some other options available ? or its not possible? For your better understanding im attaching a machine detail with considered axis.
3) OPTION-2 as Orientable-Table Machine = X- Axis / Y- Axis / Z- Axis / B-Axis (as a 4th axis) / C-Axis (as a 5th axis ) . is it correct?
4) For OUTX connection , What is the capacity of relay needs to use for this complete setup? plz provide me the product link its possible.
5) What is the capacity of POTENTIOMETER needs to connect for this complete setup? plz provide me the product link its possible.
6) MPG wiring connections are correct? ( MPG product link -
www.aliexpress.com/item/NVMPG-CNC-6-Axis-MPG-Manual-Pulse-Generator-with-Handwheel-LCD-Mach3-Only-use-our-company/32833573978.html?spm=a2g0s.9042311.0.0.nfVxqg
)
7) VFD wire connection is correct? if any thing needs to add or if some thing is wrong plz guide me how to connect.(simple hand sketch also fine) (product link -
www.aliexpress.com/item/Free-shipping-Spindle-Inverter-1-5KW-220V-for-CNC-Router-frequency-converter-1500W-fixed-with-1/2006873999.html?spm=2114.13010608.0.0.moeUKz
)
8) Im planning to make a physical HOMING & LIMIT SWITCH for the all 6 Axis ( X / Y / Z / A / B / C ) , in this case in manual there is one number of limit switch where shown, but im having 12 numbers , plz guide me how to connect? (simple hand sketch also fine)
9) If im using PROXIMEY limit switch means, how i can connect for all 6 Axis ?
10) In SPINDLE S-AXIS - ( INDEX ) Is this terminals not required to connect anywhere? If this terminals needs to have connection ? where to connect?
11) In OUT PORT ( OUT-4 , OUT-6 , OUT-8 , OUT-10 , OUT-5 , OUT-7 , OUT-9 ) which and are all the terminals not required to connect anywhere? which and are all the terminals needs to have connection ? where to connect?
12) In MPG ( 10X , E-STOP , B-IN , Z-IN , X-IN , 100X , 1X , C-IN , A-IN , Y-IN , GND ) which and are all the terminals not required to connect anywhere? which and are all the terminals needs to have connection ? where to connect?
13) In 12-32Vin = shall we go a head with 36V power supply ? If you can able to give teh product link will be much helpful.
14) Communication external interface terminal ( white plug with 4 connecting lead) where to connect? what its purpose? in manual also no detail available.
15) In INPUT PORT - ( INP-3 , INP-4 , INP-5 , INP-6 , INP-7 , 12V , INP-8 , INP-9 , INP-10 , INP-11 , INP-12 , GND 1 ) which and are all the terminals not required to connect anywhere? which and are all the terminals needs to have connection ? where to connect?
16) Kindly give the list of power supply unit for the complete set
17) Can we use this Control board for the plasma cutting machine too?
Request you to help me out to complete this project.
MADE A NEW VIDEO GUYS!
ua-cam.com/video/k6OZrYu_YuM/v-deo.html
it a bad controller ...it will never work properly ...by AKZ250 100 time better
try V2 version, it work better..so far i dont have any issue with V2
@@caturskak6936Sir . I am student.plz help ..i purchased nvem ethernet controller to make the engineering final year project but the received controller is not working..means after connecting the ethernet cable it doesn't show any connectivity to the computer plz plz help..