How to make a baywindow ride good - Front suspension explained
Вставка
- Опубліковано 27 сер 2024
- Part 1 of 2 to make your early baywindow ride nice.
Next video will be about the rear end setup.
This is how do it to make a good driver, other may do it differently.
Spindles are sold by these guys www.Hovwdiaudi.dk
Here is a video from when the beam was made on the Shop Truck: • Angora Shop Truck Part...
You speak very good English, and explain this very well.
Very informative your explanations in detail give me lot to think about when I do it great video danke schön
interesting video - thanks for sharing - cheers from polish VW T2ab. Stay connected
Hey! Have any experience with thicker trackbars for a t2? Ive seen them for sale. Yellowish in color with pu bushings. Do they improve drivability?
@@1esaus you know i actually thought about trying this myself. But I have the problem with narrowed beams that kind of stopping me. I think I would help a lot
What size were those Porsche Rims? 17's or 18's. Great video, learned a lot again.
17”. Narrowed a bit
I would like to know more about the sway bar fit
I haven’t been able to find anyone who has set it up like you did
What do you need to know ?
Is it the original sway bar? I would imagine it needs to be narrowed as well? Or did you purchase another one?
@@mccoysmakingmemories that need to narrowed to.
🤘💪
Can you tell me the wheel and tire combo you were talking about? You said they were 17”. What style are these and what tire size were you using? Great looking setup!!! I want them for my 71. 👍👍👍
Tires on the video are 195/40/17 and 205/40/17 but now I change to 185/35/17 and 215/40/17
Nice work. What tires you run?
Can u do a video on gow to make a split drive good 😅
Bus ?
@@SPRasmussen yeah please
@@tospicy4ya see if I can help you later. Have done a couple of split buses😅
Nooice? 😎 STOC
Hi can I ask when you flipped the antiroll bar did you have to use different rubber in the clamps or longer bolts to pull the bar into place thanks
Same rubber and clamps
Hey! I‘m looking for drop spindles for my 69 bay window with drum brakes. Not welded. But only disc brake spindles are available at the moment. Do you have an idea? Thx✌🏻
I have. But working on it.
Ok! I‘m waiting for it.👍🏻✌🏻
Waiting
what is the max inches can I narrow my beam for my late bay? thanks!
3” with small modifications to the shock mount on the lower trading arm. 4” if you relocate the mount on the trading arm.
Hi sir I have an early bay window bus I installed my custom air ride however it affected the castor front wheel angle which makes it hard to control over 60km per hour the bus is all over the road 📐 .I need to bring the castor back to about 4degrees as now it's negative any advice on how I can do it ? Will the castor being negative make the bus hard to control ?
Hi.
If you adjustable caster nut will not take it, the only way to get it back is to move the beam itself. This will take some work to do, as you have to make you mounting holes bigger to move your beam. If you don’t have one with that adjustability
What sway bar is that? Is it narrowed 8cm or 11cm?
Original narrowed 8cm
fyi vintage autohaus (french slammer) make a -8cm and a -11cm narrowed sway bar.
@@SPRasmussen did you just remove the ends? Is there room to remove 11cms?
Also what et are those wheels?
@@kevinhape8584 I took 8cm out of the center of the sway bar. And you can just take out 3 more. No problem. The ET on the wheels is 45
Oh so you cut it down and welded it back together?