kills me how you have all the subscribers and views you tube has never showed me one of your videos until today you must be be one of the originals 🇺🇲👍😀
Yes and I am still here. That’s was the first Twinjector ever made. And I put the pins on the tips myself. Now it’s pretty much the standard. Thank you for watching and hope it helps. Oh and I am here to help not entertain.
@@franksrooty2 well that's cool you adding the pin has made it the higher standard injector plus made it a little safer and you gained a new subscriber they couldn't keep hiding it 👍
I get mine in two weeks I will have a review video of it... thanks for this video , super useful it probably made the decision on buying the "twinjector"
@GatoradeLover11 That is up to you. Pretty much all of the companys that sell products for this have one. I does give you a base for colors and glitter. I have so much stuff right now, and most of what I buy is in bulk now it is really hard to make a sound judgement. The kit should have a mold that you use alot and will have good success with. Frank
When using the Twinjector on molds with thin tails, you need to give an extra firm push at the end of your stroke. This will fill out the last of the mold. Temp of the plastic should be a little higher say like in the 320 deg point this will help out too. Frank
@Bobbyl007 I actually have some jacobs molds with real small ports and have had no problem laminating them too. It really blows your mind when you laminate with molds with sprues that go all the way to the bottom and push up with 50/50 results. I use the Twinjector alot and is just second nature for me I guess. Frank
Good day! Enjoy watching for your work on otlichie silicone lures. Quality - above all praise. The question is whether You implement your syringes for two to three contoured pouring with separator and whether to send to Russia? What is the price? Sincerely, Volkov Denis
Hi frank I am shooting grubs 4" with a single injector and getting a good poor but when I shoot with the twin I have alot of short tails any info to get a better pour Pete
@Fishingonastring I have tried others but MF is easier to use only because it is thinner when hot. Others I have used can be real thick in the medium and hard varietys. Not sure what you want to see in the mixing one let me know and I will see what I can do. Thanks for watching. Frank
Frank, I have actually had fairly poor results with this manifold. I was wondering if maybe the molds you do this with have a larger per bait injection port off the emain sprue. As you know I make my own molds. I initially designed a lot of my molds with a 1/8" per bait port to get a better shape on the nose of the bait with little or no trimming, but I was wondering if maybe a 1/4" bait port might laminate better.
@IALONGBOARDING I seam to think so. I have used tools all my life so it may be easy for me. No tricks though just do it like I am and you will be able to make baits just like me. Frank
Thanks for the video. I like your level of organization for your pour. I will immitate for sure. The comment about 3 vs 6oz also was very helpfull.
Well said... That was certainly my chain of thought !!!
kills me how you have all the subscribers and views you tube has never showed me one of your videos until today you must be be one of the originals 🇺🇲👍😀
Yes and I am still here. That’s was the first Twinjector ever made. And I put the pins on the tips myself. Now it’s pretty much the standard. Thank you for watching and hope it helps. Oh and I am here to help not entertain.
@@franksrooty2 well that's cool you adding the pin has made it the higher standard injector plus made it a little safer and you gained a new subscriber they couldn't keep hiding it 👍
I get mine in two weeks I will have a review video of it... thanks for this video , super useful it probably made the decision on buying the "twinjector"
@GatoradeLover11 That is up to you. Pretty much all of the companys that sell products for this have one. I does give you a base for colors and glitter. I have so much stuff right now, and most of what I buy is in bulk now it is really hard to make a sound judgement. The kit should have a mold that you use alot and will have good success with. Frank
When using the Twinjector on molds with thin tails, you need to give an extra firm push at the end of your stroke. This will fill out the last of the mold. Temp of the plastic should be a little higher say like in the 320 deg point this will help out too. Frank
@Bobbyl007 I actually have some jacobs molds with real small ports and have had no problem laminating them too. It really blows your mind when you laminate with molds with sprues that go all the way to the bottom and push up with 50/50 results. I use the Twinjector alot and is just second nature for me I guess. Frank
Wish you’d make some new vids.
Nice visa I am goin to start pouring and want to get educated and yours are by far the bst
I want to start making soft plastics. Should I get a starter kit or purchase the stuff separate
Great video, now I have to get one of those twin injectors!! Where did you get that 4 cavity craw mold, looks awesome.
Where did you buy your craw mold
@sphillips93 I use mostly regular. Some supersoft on swim baits.
Good day!
Enjoy watching for your work on otlichie silicone lures. Quality - above all praise. The question is whether You implement your syringes for two to three contoured pouring with separator and whether to send to Russia? What is the price?
Sincerely, Volkov Denis
Hi frank I am shooting grubs 4" with a single injector and getting a good poor but when I shoot with the twin I have alot of short tails any info to get a better pour Pete
Thanks for this video... It helps a lot...
@GatoradeLover11 Thank You Frank
@Fishingonastring I have tried others but MF is easier to use only because it is thinner when hot. Others I have used can be real thick in the medium and hard varietys. Not sure what you want to see in the mixing one let me know and I will see what I can do. Thanks for watching. Frank
is that a hot pot you keeping the plastic?
Do you use the Regular or Super Soft MF Plasitc?
@rickhorror Glad to help you out you will not be disapointed
Frank, I have actually had fairly poor results with this manifold. I was wondering if maybe the molds you do this with have a larger per bait injection port off the emain sprue. As you know I make my own molds. I initially designed a lot of my molds with a 1/8" per bait port to get a better shape on the nose of the bait with little or no trimming, but I was wondering if maybe a 1/4" bait port might laminate better.
@IALONGBOARDING I seam to think so. I have used tools all my life so it may be easy for me. No tricks though just do it like I am and you will be able to make baits just like me. Frank
What are you using to keep your plastisol hot yur whole time
great video getting this....stay away from bears baits