Hello Jimmy and first of all a big thank you for your videos. I have a problem and maybe you can give me a hint. I have a mini pc with yellow light when power cord is plugged in and when press the power button i get a blue light for a second with fanspin. Do you have an idea how or where to look for the problem on the motherboard? Visual inspection and meassuring didnt give me any clues. :-/ Is there any way to get in contact with you?
Hi if you have fan spin i would check the VRM sections of the CPU there could be a short or an power good / enable signal missing on one of the voltage regulator or pwm controller ic.
Hi correct i just removed it because i did not know the value but i will add the new capacitor off camera when i get more time to investigate the correct value. Gr. Jim
Hey hi can you plz help me ,i have gigabyte ultra compact pc kit its was ok but now its not getting on like when i start it led screen show logo and after that power button keep blinking and display also not shown 😞 plz help me with this , i take it to repair shop also but they give it back they say this is not going to repair plz reply me 😢
Hi i can't give a solution based on this information, because you see the logo means it tried to start up and voltages are present. I would reflash the BIOS chip maybe the firmware is corrupted. Gr. Jim
Hello, I have a question about Nintendo Switch. on The Nintendo log appears, and after a while, an orange screen appears. I have one more question. I know that if I remove the Wi-Fi IC, Nintendo runs normally. However, if I remove Wi-Fi and turn it on for the product, the Nintendo log appears and an orange screen appears.
Hi i only know that the orange screen is related with the wifi functionality. Orange is a indication that there is no communication between the apu and wifi ic. Gr. Jim
Thank you. Then, do I have to replace the Wi-Fi IC for it to work properly? Please reply.
Hello Jimmy and first of all a big thank you for your videos. I have a problem and maybe you can give me a hint. I have a mini pc with yellow light when power cord is plugged in and when press the power button i get a blue light for a second with fanspin. Do you have an idea how or where to look for the problem on the motherboard? Visual inspection and meassuring didnt give me any clues. :-/
Is there any way to get in contact with you?
Hi if you have fan spin i would check the VRM sections of the CPU there could be a short or an power good / enable signal missing on one of the voltage regulator or pwm controller ic.
Did you just remove the bad capacitor without replacing it? Am I missing something?
Hi correct i just removed it because i did not know the value but i will add the new capacitor off camera when i get more time to investigate the correct value. Gr. Jim
Hey hi can you plz help me ,i have gigabyte ultra compact pc kit its was ok but now its not getting on like when i start it led screen show logo and after that power button keep blinking and display also not shown 😞 plz help me with this , i take it to repair shop also but they give it back they say this is not going to repair plz reply me 😢
Hi i can't give a solution based on this information, because you see the logo means it tried to start up and voltages are present. I would reflash the BIOS chip maybe the firmware is corrupted. Gr. Jim
You had the schematic?
Hi i did not had the correct schematic but did found an older schematic of an BRIX that helped me. Gr. Jim
@@fixmyappjim yoo it would great if you could share it neeed help on, mine
@@sahlidjouad7124 Hi this is the link: drive.google.com/file/d/1q6TIlwf4DdufIaTp6tpNJXon37Hxbnvm/view
Hello, I have a question about Nintendo Switch. on The Nintendo log appears, and after a while, an orange screen appears. I have one more question. I know that if I remove the Wi-Fi IC, Nintendo runs normally. However, if I remove Wi-Fi and turn it on for the product, the Nintendo log appears and an orange screen appears.
Hi i only know that the orange screen is related with the wifi functionality. Orange is a indication that there is no communication between the apu and wifi ic. Gr. Jim
@@fixmyappjim
Thank you. Then, do I have to replace the Wi-Fi IC for it to work properly? Please reply.
@@김미애-w1w3l Yes or reflow maybe broken solder balls under the bga wifi ic. Gr. Jim
@fixmyappjim how does someone get in contact you ?