The error you're seeing typically indicate: 1. "Enable monitor mode before ": - Your wireless adapter doesn't support monitor mode or isn't properly configured. - Ensure your adapter is compatible and enabled for monitor mode. 2. "No wireless found": - Your adapter isn't detecting any nearby wireless networks. - Check your adapter's drivers, ensure they're up-to-date, and restart the tool. To resolve these issues: 1. Pls check your wireless adapter: - Ensure it supports monitor mode and is compatible with Fern tool - Try using a different adapter if possible. 2. Enable monitor mode: - Follow these steps: - Open Terminal - Type `airmon-ng start wlan0` (replace `wlan0` with your adapter's name) - Press Enter 3. Update adapter drivers: - Visit your adapter's manufacturer website and download the latest drivers. - Install and restart your system. 4. Restart Fern: - please check now if the issue persists. If you're still facing issue, bro, feel free to provide more details or context, and I'll do my best to assist you!
hi there can you please help me. my monitor mode is enabled and turned green and am waiting to scan the wifi networks available but nothing is detecting.
Sure you can try the following commands in the terminal to restart it: 1. `sudo ifconfig wlan0 down` (replace `wlan0` with your WiFi interface name) 2. `sudo ifconfig wlan0 up` Or, you can use: 1. `sudo ip link set wlan0 down` (replace `wlan0` with your WiFi interface name) 2. `sudo ip link set wlan0 up` Or, you can use: 1. `sudo systemctl restart network-manager` (for systems using Network Manager) These commands will restart it, and you should be able to connect without a reboot Pls make sure to replace `wlan0` with the actual interface name which can be found using the command `iwconfig` or `ip link show`.
Try running below check airmon-ng sudo airmon-ng check kill check state sudo airmon-ng stop airmon-ng sudo airmon-ng stop if a device is still in monitor mode... or NOT in managed sudo ifconfig wlanXmon down check wireless device details or check iwconfig for mode: managed iwconfig bring your nic up sudo iwconfig wlanX up try restarting nm sudo service NetworkManager restart
@@savavidenovic Simply if u tell me it's not detecting even Chatgpt or AI could not find the cause of the problem unless you share me some specific error message or tell me where do u get the issue/error etc
Thank you so much man! I do appreciate this, was banging my head against a wall trying to figure this out!
@@ThuHAverageJoe you're welcome brother 🙂🙏
Thank you !!!! Helped me tons I really appreciate it!!
You're welcome Pal 🙏🙂
Thank you for watching my video ☺️
Thanks brother it was really helpful
@@MR_M.A.K_9595
You're welcome brother 🙂
Thx bro it sol my all problem❤
@@mitv4558 you're welcome brother 🙏
Thanks, worked for me, was struggling with this for 2 hours before I found this video :)
Glad to hear that this video helped.
Thank you for watching 🙂🙏
thank you so much men
@@paco9824 you're welcome Pal 🙏
thank you so much i actually love this tutorial thank you man
You're welcome brother 🙏
Thanks a lot brother!!
You're Welcome brother 😊
It says "enable monitor mode before scanning " then you refresh it says"no wireless found "
The error you're seeing typically indicate:
1. "Enable monitor mode before ":
- Your wireless adapter doesn't support monitor mode or isn't properly configured.
- Ensure your adapter is compatible and enabled for monitor mode.
2. "No wireless found":
- Your adapter isn't detecting any nearby wireless networks.
- Check your adapter's drivers, ensure they're up-to-date, and restart the tool.
To resolve these issues:
1. Pls check your wireless adapter:
- Ensure it supports monitor mode and is compatible with Fern tool
- Try using a different adapter if possible.
2. Enable monitor mode:
- Follow these steps:
- Open Terminal
- Type `airmon-ng start wlan0` (replace `wlan0` with your adapter's name)
- Press Enter
3. Update adapter drivers:
- Visit your adapter's manufacturer website and download the latest drivers.
- Install and restart your system.
4. Restart Fern:
- please check now if the issue persists.
If you're still facing issue, bro, feel free to provide more details or context, and I'll do my best to assist you!
thank you soo much bro highly appriciated!
@@spidygg you're welcome brother 🙏🙂❤️
hi there can you please help me. my monitor mode is enabled and turned green and am waiting to scan the wifi networks available but nothing is detecting.
Use wifite tool instead
Jak?@@Saifseverything
Does it work without the external adapter? Like with inbuilt adapter of laptop?
Nope u need an external adapter
@@Saifseverything what you recomande for a axternanl adapter brother?
@@kristjanbrozi759
Pls use wifite tool brother
Legend!,
is there a command to restart the wifi card back to normal after using the tool? rather than restarting the laptop?
Sure you can try the following commands in the terminal to restart it:
1. `sudo ifconfig wlan0 down` (replace `wlan0` with your WiFi interface name)
2. `sudo ifconfig wlan0 up`
Or, you can use:
1. `sudo ip link set wlan0 down` (replace `wlan0` with your WiFi interface name)
2. `sudo ip link set wlan0 up`
Or, you can use:
1. `sudo systemctl restart network-manager` (for systems using Network Manager)
These commands will restart it, and you should be able to connect without a reboot
Pls make sure to replace `wlan0` with the actual interface name which can be found using the command `iwconfig` or `ip link show`.
@@Saifseverything Perfect!, thank you :)
You're welcome Pal 🙏
thanks, work here
You're welcome! 🙏
helpfull video
Thank you 🙏😊
@@Saifseverything bro after change wlan nMe my network managr not working and my pc hanged solution please
@@mdnasim-Io
Reboot and try bro
@@Saifseverything not working
@@mdnasim-Io
Reseat your wireless adapter and try again bro
It's working bro thanks you so much ❤❤
No problem at all 🙏
Thanks bhai its working now ❤
You're welcome bro 🙂
terima kasih bro work❤❤❤❤
@@Echacutes you're welcome brother 🙏🙂❤️
thank you so much bro
@@Ayoub231 you're welcome bro 🙏
is this only works on laptop or it can work on computer also?
Yes it will work on both
"sudo ip link set wlan0 name wlan0mon " it will scan wifi
Ok
vlw amigo kkkk, facil demais.
You're welcome brother 🙏☺️
شكرا لك انت صادق
@@youssefmahmoud9874 tq bro 😊
bro thx so much
You're welcome! Bro 🙂
For me don't detecting WifiWpa, why?
Try running below
check airmon-ng
sudo airmon-ng check kill
check state
sudo airmon-ng
stop airmon-ng
sudo airmon-ng stop
if a device is still in monitor mode... or NOT in managed
sudo ifconfig wlanXmon down
check wireless device details
or check iwconfig for mode: managed
iwconfig
bring your nic up
sudo iwconfig wlanX up
try restarting nm
sudo service NetworkManager restart
@@Saifseverything All working but just WifiWpa not detecting nothing.
@@savavidenovic bro did u try above steps
@@savavidenovic
It's difficult to sit and diagnose the issue here without giving me any details related to issue.
@@savavidenovic Simply if u tell me it's not detecting even Chatgpt or AI could not find the cause of the problem unless you share me some specific error message or tell me where do u get the issue/error etc
Thank you 🌹🌹🌹
You're welcome 🙂
Thanks it actually works 👌👌👌
Tq buddy 🙂🙏
Thanks 🤩
You're welcome 🙏☺️
i can not set ip link set wlan0 down
Change the name may be set it to wlan1
👌
Tq very much buddy for watching 🙂🙏
Nice
Tq 🙂
Nice👍
Tq 🙂🙏
hehehehehheehehhe working eheheheheheheheh
@@9ucka tq 🙏
Not worked for me 😑
Please do a bit of googling bru I did the same too which worked for me keep trying and best of luck
"sudo ip link set wlan0 name wlan0mon " it will scan wifi
Ok
Nice
Tq 🙂