I am making this project using esp32 but I have 2 problems firstly the LCD moisture sensor is not working and secondly the motor is not connected to the phone on/off pls help pls requested
@@sritu_hobby i am having problems with the libraries...i downloaded it from your web and also extracted in the libraries folder but still now working. What should I do?
Hi, I'm working on the same project but I have a problem, every time the relay turns on the LCD screen gets an error, do you know the cause?, and what is the solution to this problem?
Hello! i wanna ask you something. What if i dont have ESP32 board adapter. It's just ESP32 board in my box that i have. Thank you. and im waiting for the answr
I have tried the tutorial from this video, but the program code you shared is wrong. The video and reality don't match, this makes it difficult for me to complete the program
ur code is not working n thre are many problem with ur code template n library. I dont understand there are too many differences when I apply your video sir. Thank you
I've heard that the two-legged probe/sensor usually breaks after just a few days of use because the metal strip corrodes quickly. It is true? if it is true I have to buy many two-gauge probes/sensors and change them every time they break or I can use the "operational control module" circuit connected to a handmade probe/sensor with two copper strips of the same size connected in the same way to the operational control module? thank you so much, great video!
sir why does my pump wont off even the relay-value is already to else section the pump still ON , i was log the output of the "relay- value" and the result is correct the value is already 0 but the relay/pump wont stop sucking water , and i look to the serial monitor after i put serial.println in "if else" both of the section .. and the "relay-value" show 1 when i click on and show 0 when i click off but the
you should caliberate the sensor for it to show correct water percentage readings, thats the reason why its not crossing 60.
You posted a Christmas song in May and I can respect that
nice
Thanks!
What is external
Why are you use 3.3v for 5v relay?
What is mean by extenel pin
I am making this project using esp32 but I have 2 problems firstly the LCD moisture sensor is not working and secondly the motor is not connected to the phone on/off pls help pls requested
Pls help
Same yrr
Did u find any solution
Bhai external kidhar sey connect Kiya hey please batao n
ye code kai pe open kiya hai bro ...???
Can I use PWM to allow pump to pump fluid at different rates?
Yes you can!
@@sritu_hobby sweet so I would just use a pwm pin to generate the signal?
can i use this on capstone right?
It can opearation automaticly?
What is the cost
Which Jumper wire we have to use male to female or male to male or female to female
Both of jumper wires
May I ask, for esp32 board adapter can I use another version?
Does the mobile is there only to on and off the motor?
where did you get the code ? or it is automaticly code imean automatic theres a code there?
What will be the code if we use Arduino cloud instead of blynk
hey is it possible to add fertigation system into that setup?
How can the 5v relay work in 3.3 v board
It has a 5V output pin that doesn't interfere with the other pins so this can be used for outputting
broo total program cheebutharaa pplzzz ...
this isour final year project...undesstand..
hi!
I was wondering if I can supply the 5v Water pump with de 5v output from the esp32 not with an external battery
me to
I sir i have 38 pin esp32 wroom can i do this on my 38pin esp ?
Plz sir..
what you use in external with aligator wire?
External power
how can i get the libraries mentioned in the arduino code?
Arduino ide
Can i use 3v battery as power for nodemcu?
probably not as most are 5 - 12 v
Bro can we use this with Arduino Uno
If yes pls comment
No
@@sritu_hobby
Can u give ur number to call you pls
@@sritu_hobby
I have some doubts
@@sritu_hobby I am making a project for inspire award manak
And I got selected for first round
Bro pls I need reply fastly
where should we install the librairies zip files?
Check our website project
can i use esp8266 instead of esp32 in this project?
You have to change the code
Can you please name the libraries to install in Aurdino IDE?
Blynk library
@@sritu_hobby i am having problems with the libraries...i downloaded it from your web and also extracted in the libraries folder but still now working. What should I do?
@@sritu_hobby can we use esp32 without the adapter if yes then how will we power it?
Please use two breadboards
Why did you put pin 2 in the sensor????
Working some small period time. after Display got struck and then total System Crashing. What I should Do?
Check power source
How much is its cost?
By what did the esp32 is powered!? Pls help
Please use a 9v battery
Thank you soo much for the help
Can you pls tell me that... We need toh add that library files externally or just simply copy and paste the code from the website.
Can I use type C
Is battery necessary?
If battery is used how much capacity battery you bought
Why modul relay cannot on/off?
Check jumper wires
What the program link?
Description
0:44 / 6:03
Water pump direct starting
What would the total costing be for this?
Its depends on your country
1880 rs
Hi, I'm working on the same project but I have a problem, every time the relay turns on the LCD screen gets an error, do you know the cause?, and what is the solution to this problem?
Because you might not have the liquid crystal latest library in the Arduino ide
Hello! i wanna ask you something. What if i dont have ESP32 board adapter. It's just ESP32 board in my box that i have. Thank you. and im waiting for the answr
I have tried the tutorial from this video, but the program code you shared is wrong. The video and reality don't match, this makes it difficult for me to complete the program
Apakah kamu sudah berhasil ?, saya juga ingin mencoba dan sekarang saya masih membeli beberapa alat yang di butuhkan.
Sir code is not working
chat gpt
chatgpt
ur code is not working n thre are many problem with ur code template n library. I dont understand there are too many differences when I apply your video sir. Thank you
Try again
@@sritu_hobby i will sir , thank u
@@nickyherpati3289did it work?
What about coding?
Please I need the code
Please check the video description
The site is not working, please reply and solve the problem
Please check it again
@sritu_hobby Yes, the problem is solved thank u .
في فيديو arduino obstacle avoiding + bluetooth control robot هل يمكنني استخدام bluetooth module HC-06 بدلا من HC-05
sir can help me why this code not working
after i upload have something error compiling for board esp32 dev module
@@ahmadsyazwanabdulhadi5478 Were you able to figure out the code for esp32 dev mode?
Code is wrong,send correct program please
no working bro.all wires 16 cheks.
Anyone can send simulation link..
where the crocodile clip goes to
I've heard that the two-legged probe/sensor usually breaks after just a few days of use because the metal strip corrodes quickly. It is true?
if it is true I have to buy many two-gauge probes/sensors and change them every time they break or I can use the "operational control module" circuit connected to a handmade probe/sensor with two copper strips of the same size connected in the same way to the operational control module? thank you so much, great video!
thank you my brother
You are welcome
This code don't match for ESP32 DEV MODULE
Did you figure out the code for ESP32 DEV MODULE?
Where is the code
Description
sir please make a vedio on hoe to make a land mine detector using aurdino uno
Your library links on the website is busted, I2C LCD is now password and Blynk turned into Adafruit-PWM-Servo-Driver
I'll change them
Wow that looks amazing can't wait to try it
sir why does my pump wont off even the relay-value is already to else section the pump still ON , i was log the output of the "relay- value" and the result is correct the value is already 0 but the relay/pump wont stop sucking water , and i look to the serial monitor after i put serial.println in "if else" both of the section .. and the "relay-value" show 1 when i click on and show 0 when i click off but the
do you think this issue is happened from the battery->relay ?
found my problem sir , the relay is the problem
thank yu
can i get the full coding pls
Description
Please help me
Teku nai ata
amazing video bro please pin me