You might not see this but I really appreciate this video because I just got my srb400 guard i ordered and drum mag even though the mag and gun cost the same as the srb1200 and I was like dang that was stupid of me ....I should o just bought the srb1200
@@sythro. at least fore there is a grip that you can buy for the srb 400 and you can use the mod in this video for the drum mag to make it the same as the srb 1200. The srb 400 should have the same fps as the 1200 or at least close
There are some, but in Australia, they use high powered NERF for sniper since it's more accurate than gel balls 😂. There are also manual pump style shot guns
The wires are exposed to the gel balls regardless of the baffle. The baffle just reduces the magazine capacity. The 1200 round magazine doesn't have the baffle.
@@JoseLopez-ld7tk sure, put a bunge cord that goes around the base of the mag and over the top of the blaster to hold it in and make it easy to change.
The thing they don’t tell you is the srb1200 has a bigger battery in the drum magazine. And the 800 drum magazine has the same battery as the 400 round magazine
If I figure out a way to get the drum donated to me.lol the clip for the lightning blaster somewhere I found cost $17 moneys tight to be cutting stuff up without knowing for sure😭
I did this and followed everything but my gun is shooting less like the orbeez or going places it’s not supposed to like in the bottom of the mag and it’s shooting less orbeez like 4 per sec can you do a video on how to fix this problem
You need to carefully watch this video again. It sounds like you left out or misplaced a piece, like the part that covers the gear. That's the only way gel balls could be getting into the bottom of the mag.
🤔 Ummm, do you really need proof? I removed the baffle that blocks off about 1/3 of the space which the 1200 round doesn't. Seems obvious that it will hold the same amount now.
These videos are dope I got the sb1200 and always thinking how the drum fits so many gel balls
Thanks bro
what an easy mod! great job finding that out! thanks for sharing!
You might not see this but I really appreciate this video because I just got my srb400 guard i ordered and drum mag even though the mag and gun cost the same as the srb1200 and I was like dang that was stupid of me ....I should o just bought the srb1200
SRB400 is a better blaster, and now you have 2 mags
@@engineerable why is it better?
@@sythro. Easy to open to repair, based off more standard design, better quality shell. Internals are the same.
@@sythro. at least fore there is a grip that you can buy for the srb 400 and you can use the mod in this video for the drum mag to make it the same as the srb 1200. The srb 400 should have the same fps as the 1200 or at least close
It worked! Thank you 😊
👍
Your channel is amazing brody love the mods an Idea’s thanks for the less spending thumbs up super subscriber ‼️💯🔥
Thanks bro!
This was a huge upgrade. I can personally say, 1200 rounds is quite a lot better than 400&800.
If you make a 3D printed add on for the 400RD mag will you sell it, I would buy one for sure
I'll share the design.
Well when you get a chance.can u make a video on What has to be done so it can be compatible or what modification have to be done. Thanks…
It may be possible with a 3D printed part.
You’re now gonna have multiple men with suits ,ear pieces and gel blasters holstered turn up at your house . 🕵🏼♂️🕵🏾♂️🔫
Gel Squad
Love these splatter ball gun videos:)
🙏 got more coming!
Thanks i was thinking about buying the srb 1200 just for the mag but now i don't.
Yep, same mag after you do the mod
Amazing video bro and underrated UA-camr. But my question is, does it affect the gun, like does it ruin the guns shooting ability?
Thanks, the change has no detrimental effect. It only expands the capacity.
@@engineerable ok thank you just want to make sure! 👍🏻
He should work for splattrball he’d probably make so much money with all the ideas he has for splatterball
Splatrball would fire me for revealing their dark secrets.
@@engineerable yea😭😭
I got mine today I ordered mine Monday and I ordered it just in time because right after I ordered mine it went out of stock
Lucky 🐕!
we need a splat r ball sniper and shot gun (maybe even artillery)
There are some, but in Australia, they use high powered NERF for sniper since it's more accurate than gel balls 😂. There are also manual pump style shot guns
Will those mags fit the Lightning blaster?
Unfortunately, no. Splatrball and Lightning Blaster are not cross compatible
I mean wouldn’t the wires get wet now since you removed the piece that prevents it
The wires are exposed to the gel balls regardless of the baffle. The baffle just reduces the magazine capacity. The 1200 round magazine doesn't have the baffle.
My clip from my release mag broke what can I do if I buy a drum mag
3D print one
I don’t have a printer
Can I still put a new mag in my gun with out it? I have a mag in already but i just taped it
@@JoseLopez-ld7tk sure, put a bunge cord that goes around the base of the mag and over the top of the blaster to hold it in and make it easy to change.
do u think it would be too difficult to make a double drum mag 3d printed attachment to the original drums with working contacts
Is your goal more capacity?
@@engineerable for capacity and looks
Bro i bought the sb400 and 800 round mag will most def doo this
Right on
I finally did it (lost one screw😭) but i did it thanks
i got a question does this mag is compatible with a gel blaster g36
It is not, I've tried.
ok thanks @@engineerable
Hello! How much is the 800 round magazine? Great video 📺
It was $30. Thanks!
@@engineerable Ok thanks
That green srb400 is custom painted or you boughted like that?
Custom painted it
take apart the srb1200 to see if the drums are the same
I have. It's the same minus the divider that reduces the capacity.
@@engineerable ok thanks
Where did you buy the drum mag from ?
I got mine on Amazon amzn.to/3P5dPuI
The thing they don’t tell you is the srb1200 has a bigger battery in the drum magazine. And the 800 drum magazine has the same battery as the 400 round magazine
That’s the trick right there that’s why they don’t sell 1200 drum mags because they want you to buy the whole gun
Battery in the mag? There's no battery in the mag.
Will this affect the performance at all?
No
@@engineerable ok thanks!
I’m mad and happy at the same time, but now I wanna get one because I thought it was a rip off only 800 rounds. Now that I see they tried scamming
Hopefully it’s still it stock Tuesday i dot get paid till then
🤞
Can you make a video on how to repair the 1200 round mag because mine split in half on the top part
Post an image here of your problem www.reddit.com/r/SplatRBallUpgrade
What do I do if my drum magazine isn’t feeding after the upgrade in the video?
Take it apart and follow reassembly steps to the T. There's probably something you missed when putting it back together.
@@engineerable I did, it works a little better. Thanks for the help!
@3:15 where your rt thumb is.I just want to cut the part of the drum & modify it to fit the lightning blaster clip 🤔
Give it a try, and let me know how it goes
If I figure out a way to get the drum donated to me.lol the clip for the lightning blaster somewhere I found cost $17 moneys tight to be cutting stuff up without knowing for sure😭
@@raymondbetancourt6498 where'd you find the lightning blaster clip to buy? Link?
Original wells G36C magazine,v3,v4 gel blasters
Where do you buy the screwdrivers
Link is in the description
Does the 800 round go on the Srb1200
Yes, the mags are cross compatible
how do you know this adds another 400? did you take apart the other drum ?
Yes, I took apart the 1200 drum mag. Watch this video: ua-cam.com/video/Xrie8nZf72g/v-deo.html
I hope they don’t try and switch this up now
I did this and followed everything but my gun is shooting less like the orbeez or going places it’s not supposed to like in the bottom of the mag and it’s shooting less orbeez like 4 per sec can you do a video on how to fix this problem
You need to carefully watch this video again. It sounds like you left out or misplaced a piece, like the part that covers the gear. That's the only way gel balls could be getting into the bottom of the mag.
Hey do you have a link to the video of the 400 capacity extender (or a link to a file)?
Not yet, still working on it, and will have a video soon.
Where can I get a #1 and a #O long screwdriver? Thanks in advance
This is a great precision screwdriver set for taking apart gel blasters. amzn.to/3BbWLyd
I actually ordered a set of steelman long reach precision screwdrivers on eBay!!! Thanks for the mag tip!!!!
can a srb 400 take the 1200 mag? because i’ve been using the 1200 mag on my 400 and i think the gears stripped
Yep
@@engineerable so why did the gears strip
@@CDBhajj cause it's made cheap
i like that
When you transform the blue drum to a magazine 1200 and you put it on the orange pistol do it shoot
Yes, it does shoot fine on the orange blaster.
Why did your not shoot cause mine’s doesn’t
Can I still do the tracer mod but with the 800 round mag thi
@@TheOfficialGTR_KID yes
Okay thanks 😊
hey how long did the 800 drum take to arrive?
Few days
Can u do the same thing we the 1200?
The 1200 already has the baffle removed.
Ehat screwdriver did you use can you please put the Amazon link
▶ Screwdrivers - amzn.to/3wbIRd8 or amzn.to/3yDfrWN
@@engineerable thank you
@@engineerable how long does it take to ship from Amazon?
i did this now the orbeez in the drum are not feeding and some of the orbeez go everywhere inside the mag
You must have left out the drive gear cover, or not reassembled correctly.
How much for the 800 hundred round mag
Links in description amzn.to/3P5dPuI
Is the srb1200 better than the srb400?
It's my opinion that the SRB400 is better. It's much easier to take apart too.
Hi
They really tried to finesse fr
Can't finesse me 😂
Can you sell me a 1200 drum
But u didn’t prove that it holds more
It’s common since that it will
🤔 Ummm, do you really need proof? I removed the baffle that blocks off about 1/3 of the space which the 1200 round doesn't. Seems obvious that it will hold the same amount now.
@@engineerable I feel like the magazine baffle would be used for something important.. As of now have you noticed any issues with the drum?
@@spizun It's just there to limit the magazine volume. The 1200 doesn't have it. No issues removing it.
Now make the 1200 have more in it
😂 I was trying to figure out something, cause so much space is wasted.
@@engineerable 😂
😂😂😂😂😂
@@engineerable did u ever?
This so cap it broke my gun 💀
How?