If you do that on the 300c models from 2005 to 2010 you break the bumper, on those models you must slide the bumpers back, since it has a system of rails that widen the bumper, please do not try to remove those side clips or you will break. Remember once you remove or remove the staples just slide back
Is there any chance it wont line back up right putting it back on or can a clip break and then the bumper will have spot that bulges out a little? I want to swap out my lower rear valance but afraid I wont get my bumpber back on right.
How do you remove the upper molding/trim from the rear bumper? This video was very helpful! I have been trying to figure out how to remove my rear bumper to fix an area that was pushed in from what looks like a trailer hitch.
Once you have the bumper off just flip it around and there are a few plastic clips you need to push down. It’s pretty rigid so it can be tough but just work slowly and get something to wedge behind the piece as you go.
Thanks for the video, Getting a blind spot monitor service on my display, Do you have to take the whole bumper off the get to the blind spot monitor devices or can you just remove a little to get at them?
Hey i got a 300s and and the rear bumper kinda comes off where i think those clips are suppose to be so I’m guessing it’s missing some. Any idea where i could get some and how i put them on
i'm trying to replace the chrome strip on top of the bumper, do you have to remove the whole bumper, the part number is ch1144104 and it fits a 2014 chrysler 300
If you are asking that question after watching the removal video and can't understand how to do the opposite of removal please don't work on your own vehicle.
Took the front bumper off for about a week in very hot weather and had it on tressles. It warpped really badly so my advice would be to store it in the same possition so as to prevent it happening. wouldn't go back on at all..!!
Hi good video, I need to remove mine to get at the “ blind spot detector sensors” would have been even better had I seen where they are positioned. Thanks 👍🏻
If you do that on the 300c models from 2005 to 2010 you break the bumper, on those models you must slide the bumpers back, since it has a system of rails that widen the bumper, please do not try to remove those side clips or you will break. Remember once you remove or remove the staples just slide back
👍🏼
Is there any chance it wont line back up right putting it back on or can a clip break and then the bumper will have spot that bulges out a little? I want to swap out my lower rear valance but afraid I wont get my bumpber back on right.
How do you remove the upper molding/trim from the rear bumper?
This video was very helpful! I have been trying to figure out how to remove my rear bumper to fix an area that was pushed in from what looks like a trailer hitch.
Once you have the bumper off just flip it around and there are a few plastic clips you need to push down. It’s pretty rigid so it can be tough but just work slowly and get something to wedge behind the piece as you go.
Thanks for the video, Getting a blind spot monitor service on my display, Do you have to take the whole bumper off the get to the blind spot monitor devices or can you just remove a little to get at them?
Hi I got Chrysler 2014 s model and I want srt rear bumper and lights is it easy to install and rear lights works easy ?
Thanks
Hey i got a 300s and and the rear bumper kinda comes off where i think those clips are suppose to be so I’m guessing it’s missing some. Any idea where i could get some and how i put them on
Do you have a video on how to put back the bumper on a 06 Chrysler 300c
I’m sorry. I do not.
i'm trying to replace the chrome strip on top of the bumper, do you have to remove the whole bumper, the part number is ch1144104 and it fits a 2014 chrysler 300
Hi do u think bumper 2005 AND 2007 fits each other
Hey. I'm trying to add some sound deadening filler to my trunk. Do you have (or can you make) a video on how to remove the lining in the trunk? 👌🏽
Do the newer bumpers fit this model?
I don't think so
Is it possible to put bolts in rear license plate?
Hi! I how do you put the new bumper on?!
The opposite way that I took it off.
If you are asking that question after watching the removal video and can't understand how to do the opposite of removal please don't work on your own vehicle.
Can You Swap A 11-14 Rear Bumper With A 15-Present Bumper?
NO. different bumpers and tailights
Hey man can you take the parking sensors off the old bumper and put it on a new one?
Absolutely. You should be able to pop them out of their positions a snap them into a new bumper
Took the front bumper off for about a week in very hot weather and had it on tressles. It warpped really badly so my advice would be to store it in the same possition so as to prevent it happening. wouldn't go back on at all..!!
Oh man, thats no good, sorry to hear that.
Hi good video, I need to remove mine to get at the “ blind spot detector sensors” would have been even better had I seen where they are positioned. Thanks 👍🏻
Pro tip: watch series at Flixzone. Me and my gf have been using them for watching loads of movies during the lockdown.
@Rodrigo Kannon Definitely, I have been using flixzone for months myself =)
What is that sensor clip called!!?!
No idea
It the Pacifica 2017 the same Tactics?
Same type of removal. Location of the clips and bolts will all be different.
Is this similar for a 200?
Great video...some dude wanted $50 to pull it at the bone yard! HA! Knowledge is power.
Heck yea and in this case knowledge is $$$
Same for Pacifica?
No, sorry
Why did you have to remove it in the first place? I'm sure its not for the heck of it....LOL.
Haha no. I was taking it off so I could vinyl wrap that horrible chrome piece on it.
@@Rythecarguy Thanks I was wondering.....
Of course. For real though, I have taken parts off of my Xterra just for a video lol.
@@Rythecarguy did you remove the chrome piece to wrap it or did it while it's still on the bumper?
UA-cam and their f ing commercials wtf man when u in a hurry no goof
Is there a lot of commercials on this video? I don't set them manually.
Adblock, you don't get any commercials
You’ve down us how to remove it twice, now show us how to put it back on. lol
Reverse the steps lol
Okay but how do I put the clips back on along the top edge when it’s flush?