CZ P07 Disassembly & CZ P07 Trigger Job with M*CARBO CZ P07 Accessories!
Вставка
- Опубліковано 22 лип 2024
- GET THE CZ P07 TRIGGER SPRING KIT HERE: www.mcarbo.com/cz-p07-trigger...
CZ P07 Disassembly and CZ P07 Trigger Upgrade! Custom CZ P07 Trigger to fix CZ P07 Problems. American Made CZ P07 Accessories by Combat Veterans! Ultimate CZ P07 Upgrades for a CZ P07 Custom Pistol. Best CZ P07 Trigger Job with all in one CZ P07 Trigger Kit to Lighten Trigger Pull and Improve CZ P07 Accuracy! Precision Machined CZ P07 Aftermarket Parts for Superior Performance and Reliability! Reduce your CZ P07 Trigger Pull with the M*CARBO CZ P07 Trigger Spring Kit! Download the CZ P07 Manual.
TIMECODES:
Intro - 00:00
Parts Needed - 01:34
Tools Needed - 02:18
Firearm Clear - 03:11
Factory Trigger Pull - 03:18
Field Strip - 03:49
Slide Disassembly - 04:12
Trigger Spring Kit Overview/Swapping Springs - 07:29
Sanding Firing Pin Block Stop - 08:36
Slide Reassembly - 13:16
Frame Overview - 18:00
Frame Disassembly - 19:37
Frame Parts Review - 30:43
Frame Parts Sanding - 31:19
Polishing Internal Parts - 36:26
Hammer Reassembly - 52:38
Trigger Reassembly - 55:23
Sear Reassembly - 58:41
Decocking Lever Reassembly - 01:01:16
Reattaching Slide - 01:05:20
Function Check - 01:05:41
Modified Trigger Pull - 01:07:07
Wrap Up/Outro - 01:07:33
#MCARBO #CZP07 #P07
Many thanks for the most informative, intelligent, articulate and visually instructive trigger job video on the net. Excellent work.
Tyler Kent Thanks Brother, glad you found it helpful! We appreciate your support!
@@MCARBO I appreciate your service to this country. Please pray for our military, police, first responders, President, and Vice President. They need The Lord's guidance, protection and blessing. They stand between us and danger. It is oftimes a thankless job. God bless.
@@MCARBO can I still carry my p07 and have the same reliability after the trigger upgrade ?
@@sigspearthumb5237 yes, as long as everything was done right
I finally took my PO-7 to the range, I haven't been in almost a year. The kit made an unbelievable difference. The last time I went to the range my daughter made me look like a beginner. This time the PO-7 was a completely different shootin iron. I'm not kidding 15 rounds at 12 feet all were in the black and back at 25 feet all in the black. I was so impressed with my hits, I felt like I should be shooting in competition with a little more practice. If you're on the fence about installing one of these kits. GO for it, don't wait. Follow instructions the video can be stopped, rewound and played at many times as needed for a proper job and you will absolutely love the way it shoots. If you don't want to do it yourself, send it to them, they'll do it for a fee but it's worth the price.
Just finished the kit and followed the detailed video. My P-07 went from 5 3/4 lbs to 3. Lbs in single action.. and from 12.5 to 7 3/4 lbs dbl action… best 30 bucks Iv ever spent on a trigger job! Smooth Crisp pull .. thank you ..
I don’t think I’ve ever seen a better install video in my life.
I can't tell you how many hours of videos I've watched as I prepare to do some modifications. This is by far the most thorough and easy to view that I've seen. thank you Mcarbo for giving me the confidence to try this myself in the near future.
Much better than Cajun gun works you actually show people how to install the product you sell in GREAT DETAIL 👍👍👍 greatly appreciated thank you
Thanks Brother! We appreciate this. Glad you find the videos add that much value!
Cajun stuff works and they help their customers if there's an issue
I finally got it done. Without this video I'd have never gotten through this. Great job hitting all the focus points, angles, and descriptions. Everything went swimmingly and seamless up until the final step of reinstalling the decocker, then it all went to angry town. A brain surgeon could've told me he'd done easier things than this and I'd have believed him. Anyway, after about an hour of fiddling I finally got it together. I should've taken a before and after pull weight but I didn't. My cheap Wheeler pull gauge is telling me the DA is about 9# and the SA is about 4.5#. I don't know how accurate that is, but I can feel the difference and it feels much better and smoother than it was. I'm satisfied with that. I didn't want it to be ultra light anyway. It feels about just right. If I were to carry it, which I might, I don't want to feel like the DA can go off by accident. Thumbs up here.
This is my first time to ever review a video but I was so impressed with this one from MCARBO I just had to say something. I've used your parts on my Ruger PC Charger, and Hi Point 995.All parts were perfect fits and excellent quality. So, I knew the kit would be a quality kit. After watching the video, a couple of times with its excellent instruction and camera angles I felt confident enough to tackle it even though I had never taken a gun this far down. I bought the gun 2nd hand and it was dirtier than I thought when I got deep into it. So, I did a thorough cleaning and polishing of all the parts and with the new springs the results is nothing short of AMAZING!!! I don't have a trigger pull gage but I would have to guess the double pull is in the 6-8 lbs. range but very, very, smooth so there is no grit, no stacking, no roughness of any kind. Just a nice smooth pull! The single action is so smooth and light it almost scares me, I would guess it is around 2 lbs. or less. It is lighter than my CANIK TP9 ELITE which comes from the factory with an action trigger job by professionals and from what I have read is about a 2.5 lbs. trigger. It is also lighter than my TIMNEY Triggers which is 3 lbs.
This excellent video and MCARBO's excellent spring kit saved me about $500. as I was going to send my CZ off and have a competitor's kit put in. I'm glad I decided to do it myself as now I am more familiar with the inner workings of the CZ and have an amazing trigger. Can't wait to get it to the range.
Having just finished this kit on a P09 earlier today, I would suggest the following change with the reassembly: wait until the very end to tuck the trigger bar spring under the trigger bar. Reassembling the decocker lever is a bear and a half to do and having one less thing under spring tension to balance is better.
I wish I had read your comment before I discovered it by myself after a significant amount of wasted time.
Thanks for posting this tutorial. I was able to replace the same components from another well known parts manufacturer. Took me many hours on the decocker step. Couldn’t get the square studs to snap in all the way until I moved the hammer back one click. Then everything snapped together as your video showed. Hope this helps someone else
This guy is a mad scientist. Lol. I like dat.
Did this trigger job yesterday, following the video step by step. Was not hard at all and WOW the results are amazing!!!!
I am more than impressed with this spring kit from MCARBO!!
Took my P-07 to the range immediately after the work was done and shot thru 100 rounds. Works flawlessly and the double action trigger pull is buttery smooth and way lighter. Single action trigger pull is crazy. Able to stage it right before the break for very consistent shots!!!
Thank you so much MCARBO for making this kit!
Thanks for the vid, super helpful
Thank you so much for this detailed step by step video. I installed a custom trigger & spring kit from a local manufacturer here in South Africa, but your guidance into taking the firearm apart and putting it back together, along with the polishing instructions makes this an invaluable piece of information to anyone out there who wishes to do this kind of upgrade themselves. Job well done!
I've already reviewed this but I've got to go again. I just finished the Mcarbo spring kit installation using this video to also sand and polish. The result was amazing. I love CZ's and own three including the Shadow 2. This is my favorite as the shadow, in my opinion is a better overall gun, it also cost a bunch and is not a carry gun. The CZ P07 is a carry gun and super accurate. It did have a bit of a gritty double action and this of course in a lesser fashion, gritty on the single. After putting in the spring kit and following this video (which is the best how to I've ever used) I cut the pull in half. The double action is so much better and smooth. The single action was shocking. Smooth as glass and pull cut in half and I tested it with my meter and it was a solid 2.49. The following 10 pulls put the average at this number and the difference was only as high as 2.5 and low of 2.8 with the majority dead on at 2.49. Double action was 6.1 average with only a .1 variation high and low. I say this because large deviation between pulls is horrible. This kind of consistency is outstanding and hard to find on trigger upgrades and I've done a lot of them on my handguns and rifles.
Anyway, this is a very inexpensive mod that will make your great CZ even better.
I don't even own a firearm, but I really enjoy this content. Its informational and relaxing.
best instructional on the p07 I have seen
All in all an excellent demonstration for installation of your kit. Your camera positions and zoom levels were really well done making everything you were describing visually crystal clear. Just watching this gives me all the confidence I need to do the job. Thanks for your time and efforts.
Thankyou SO much for taking the time to explain this in such great detail! It helped so much. By far the best instillation video I've watched since working with guns. I love this product and this company. Keep up the great work!
the best install video I think I have seen for any firearm!! I already watched it 2x. Am going to order the spring kit now. Cant wait to start slinging polish all over the kitchen.
Have to come in and comment once again on how much this video and the kit did for my P-07. Made a great firearm a perfect one!!! Thanks for this video and the parts kit!!!!
I watch your videos even when I don't own the firearm covered just because I enjoy the way you show each and every step. The videos are really well done. Thanks for all of the info over the years and the great MCARBO parts
Excellent tutorial. I just ordered the spring kit and grip cover for my P 07. Thanks for the video, it is the best I've ever seen.
Just installed this in my p07.. took me a little bit to polish but after getting it all installed thanks to the awesome video with great detail. If it weren't for the video I would've never finished it. Before gritty trigger and A LOT OF CREEP! After.... WOW! The pull is amazing there is still some creep but the overall smooth pull with a super light SA. I couldnt be more happy.. thanks for the awesome AMERICAN MADE KIT!!
Even if you don’t buy this product. This IS the best instructional disassembly/assembly video on the P07 period! Now Since I’ve done the hard work. I’ll order this kit and give it a try.
Thanks Brother, we appreciate your Support!
My spring kit for my new P07 will be here on Monday here in Pa from Mcarbo. Watched this video twice to get me prepared. Great instructional video. Thanks!!!
I love MCARBO upgrades! And their videos are second to none!! I did my Ruger American predator, Ruger LCP Max and now I’m about to do this to my new P-07!! Much love to MCARBO!!
Just installed my new M-CARBO spring kit. Polished everything per your instructions, Dremel, Flitz , etc. I don’t have a trigger scale, but man can I feel the difference! Night and day. Thank you for the kit and this instructional video, I couldn’t have done it without your help and resources!
I’m starting to get into buying some CZ handguns and your videos and website has gave me more confidence in how to make my gun it’s best. I love your attention to detail.Great job
This has to be the most detailed video I've ever seen. I'm new to CZ pistols so this will be instrumental when I start taking these apart. Ordered your spring kit a bit ago. Thank you so much for going through all the effort to help folks learn the workings of these pistols.
A detailed, high-quality and very professional guide, helped me a lot to insert the trigger spring. The best I've seen. Thank you very much
I've not bought one of your products myself but have installed them for others (Sub2k and this CZ). You guys, and you the owner, going through the trouble to make detailed videos like this shows your dedication to the customer and the market. Totally inclined to check out your products. Thank you very much.
P.S. Ngl, this spring kit turned out pretty well. Tempted to get a P07/09 myself now lol
This video inspired me to work on my own gun instead of taking it to the gunsmith. I successfully installed the kit!! It did take me a while longer though. That roll pin did NOT want to go all the way in. I am much more comfortable with all the inner workings of my p07 after having done this; super cool, very good video, trigger pull is much improved. Thanks mcarbo
That’s because I think the 40 cal roll pin bigger hole is on the opposite side then the P07. I did the same thing and wish we had a heads up. So anyone following this video step by step put roll pin on opposite side or find bigger side to start.
@@hardcore4476 Are you pretty sure it's definitely gonna be on the other side? I've never done a trigger job and I'm just nervous not to mess anything up. Edit oh wait I noticed he's working on a .40 cal, so you're saying you believe the 9mm model I'll install the pin from the opposite side? Thanks for any advice!
Just installed this kit and WOW. SA is 1911 smooth. Decocker reassembly and spring drove me nuts but I got it😊. Your products are great and the videos are excellent.
Awesome video, brotha, I'm sold. Excellent explanation and camera views of everything.
Bought the kit and installed it based on how well this video was done. First time working on a CZ (Glock armorer, so wasn't too worried/used to small parts in small places). It was a bear getting some things lined up, but like others have said, it's a great, well thought out and very informative video. Excellent work.
Amazingly clear, precise instructions. Best ever. The 07 is not the easiest gun to work with but you made it look easy. Thanks.
Thank you for your awesome instructional videos! This video was perfect! I put my MCarbo spring kit inside of my P07! The only time I had any troubles were at the exact times you warn the viewers about! I was able to figure it out with the help of the video! Great job! Thank you for your content!
Great video. Will be Ordering the trigger Spring kit for my
P-09. Once again great how to do video! Thanks for sharing. From, New Mexico, Stay safe and stay blessed!👍🇺🇲🇺🇲✌
Very concise and perfect for the first time trigger DIY. I ordered the kit for my P01 Omega Decocker, and just can't wait. May be i can get in the Zone like you while polishing the parts :) Many many thanks!!!!
Congratulations you are genius. I performed all the steps and my CZ was fantastic. It's great to have such a competent company providing such good material. I bought the kit through a third person not being able to buy it on ebay for not shipping to Brazil. I am registered in the army and many shooters love and wear CZ. I was very pleased with you.
Thank you for the great instructions! I liked the trigger pull on my stock p-07 but the mushiness and the roughness of the pull bothered me. So I just did the polishing part without changing the springs. It feels much better now. The hammer was squeaking after putting back together; dropped one drop of oil on it and it made a huge difference. Much better trigger now
As a deadly force instructor as well as an FFL/SOT and a person whose worked on quite a few single/doubles, I'm ecstatically happy for 40 bucks delivered as I watch this video knocked out the assembly and and beyond blown away for what I'm spending my results are unparalleled!
😂
How do I get one?
Thank you for the informative instructional video and product. I recently received the kit and did the replacement. Fantastic results and video made the install MUCH Easier. Thank you again.
I just completed this upgrade and OMFG it made an incredible difference. The DA is down to about 6-7# and the SA is much crisper and running 3-4#. The install takes some time and patience but the result is amazing. I have a Walther PPQ that has an unbelievable trigger and this Mod on the CZ makes the P-07 nearly as good. Good Job MCARBO
Great video! One of the more frustrating things I’ve done this week but the step-by-step you provided made it work - thanks!
Guys, I just wanted to say thank you for an excellent and informative video. I just purchased the kit and was able to all of this with no hitches. The use of the video close-ups was great and really helped illustrate what needed to be done. A couple of points that might clarify for others doing this for themselves. In my case (p07 suppressor ready purchased 2/2021), the hammer was in much better shape with no obvious machining marks and a very smooth finish. I have maybe 400 rounds through it at this point and I suspect they are just machining them better now. I hit it quickly with the sandpaper but then went directly to polishing. The trigger bar also was much smoother than I expected, so that part went more quickly than depicted here. Finally, when removing the factory firing pin retention pin, I recommend a roll pin punch, next size up from what's stated and importantly, have a second set of hands depress the firing pin from the back when you start to tap the pin through. Made a world of difference. The action is much smoother now and look forward to taking it to the range tomorrow afternoon. DA is notably softer and the SA feels very similar to my shadow 2, so I think I'm under 3 lbs now in SA. There was quite a bit of gritty feel before, which is gone. Thanks again!
A quick update after my trip to the range. This was a great success. My accuracy at 3/5/7 yards was dramatically improved due to a lighter, smooth, consistent SA trigger. Much tighter groups. I did some work from the holster as well today and the lighter DA pull helped with that first shot placement. No issues with FTF or anything like that, shot great. Using 115gr FMJ. I'm really pleased and tickled that I was able to do it myself. Can't wait until friends ask for a turn and I can casually mention that I did the trigger job... ... Thanks again, MCARBO!
Glad you got the P07 kits, such a great gun and this kit will help out a ton.
I just installed this kit in my P09 and this video was perfectly filmed to show exactly how to do it with complete confidence. THANK YOU. My p09's trigger is AMAZING with this trigger kit.
Did the kit shorten the trigger reset length?
@@evdonkbuster Not a ton, if at all. But the reset isn't bad to start with.
Chris makes the PITA job of removing & reinstalling the safety/decocker , disconnector, firing pin block,etc. look easy. Nobody explains these processes better.
I swear by Flitz and use it on everything around the house like fry pans, knives, guns, etc. They're a nice group of people to speak to about different applications of their products. I've been to their factory (15 mins from me. I used to be in the coating business) and they've been very couteous and helpful
Enjoyed watching...
Now I gotta go find a P07. Thanks sir!
I can't tell you how many times it's taken me 45 minutes to get that buggerdly decocking lever in, and you explained, in beautiful detail, how precisely to do it!
Great video! Super clear and detailed. M Carbo kit for my P09 is ont the way. Can't wait to get it to start the trigger job!
Thanks for posting this, it enabled me to install the CZ Custom DA Straight Trigger.
just installed the spring kit and did a trigger job thanks to this video, big thanks!!
Awesome video, I’ve been debating on buying the P07 with the CGW pro kit installed, that takes the P07 from a $400 gun to a $700 gun. But now I feel like I can buy the gun factory for $400 and install your kit and polish up the parts myself. Save $$$ thank you for this awesome video and kit. I’m really happy with my Ruger M77 Hawkeye spring kit I got from you guys. 👍🏻👍🏻
Awesome! Thanks Brother for your Support!
Chris, thank you very much for the video. I couldn't have done it without you. I followed along and everything went very smoothly (a little trouble getting the decocker pin set back in but after a few attempts I figured it out). Like the results, especially in single action. Feels like I just bought a new gun. Thanks.
any tips on the decocking leveer reinstall. i cant get it lined up properly and the ejector seems to be fully seated
Great video! P07 came apart and went back together with a much improved trigger.
Awesome! Glad to hear it Brother. Thank you for sharing your results!
Nice job on this video. Great camera work and clear instrns!
I ordered the spring kit for my SPO1 along with the stainless guide rod and the new trigger retaining pin as well. You sure seem to like polishing these babies.
Just did my 09 tactical and oh man ohh man is that s.a pull so easy.
I wouldn't carry cocked now.
Definitely recommend and can't wait to shoot it.
You've done this before! :D
Super nice video for step by step disassembly and reassembly, even when you're not changing out springs!
Great job as usual-- photography is excellent--- narration is excellent!!!! The right way to make a video!!! Grant B.
Thanks for the video. I will be ordering tomorrow. Looking forward to it.
One of the best vids ever on this subject. Well done sir. Let the ordering begin.
Bought and installed this kit and polished the internals as shown in this video. Made a world of difference...S/A is just great now. D/A..well it made a difference but not like the difference with the S/A. Warning...disassembly of a CZ is not as easy as a Glock! Take your time, watch and re-watch if needed. E mail Mcarbo for any assistance, they are more than willing to help out all they can!
Very in-depth video made the whole process very enjoyable to install great job keep up the good work
Yet another informative step by step by MCARBO
The best Disassembly/assembly videos on YT!!! Thanks!!
I did some similar work on an HK45 years ago and vowed to leave all further purchased DA/SA alone, but here I am. thanks for the video! Another thing is to take a chain saw file (small rounded file) and lightly get rid of the plastic over molding on the frame near the web of your hand. That drove me crazy and if careful you can barely tell it was knocked off and smoothed out.
Got it all polished and new springs in and all back together with the help from your video thanks
Awesome! Glad the video was helpful.
I dont know how much i should thank you for this video. This is the best video ever. I learned a lot from you man. You're the best- keep it up- God bless✌
just ordered the kits for my P07 and P09 and Shadow 2. got the polishing accessories and extra 1K grit paper. Looing forward to making bling!!
Great kit. Very good video.
40% trigger pull reduction
Thanks!
Thanks Brother, glad you found it helpful!
Took a bit but just installed my new trigger! Thank you for the excellent video!
Just installed the spring kit & I'm very happy with the results. Single & double action are much smoother & lighter, with the single action being the most noticeable improvement. It's borderline 1911 good! I'd recommend removing the extractor spring from the frame while doing the work & re-install it when you're ready for that step. I'd also recommend being fairly meticulous with how you seat the pins during re-assembly. I didn't have the sear pin & hammer hinge pin seated exactly correct and I had difficulty making everything work. There's a bit of a learning curve to it - mostly learning from your own mistakes. Everything in the video is accurate and the results are equally impressive. This spring kit & some Talon grip tape make this P-07 a joy to shoot now.
Holy crap!!! I just finished a trigger job on my CZ75B Omega, following this tutorial. Wow!! The double-action trigger is smoooooooooooth. Both are softer, too. I have to run out to the range now. Thanks, Chris.
Stephen Connelly Thanks Brother for sharing the results! Always happy to hear this kind of reaction! It’s night and day better!
Just in from the ops check. Hallelujah! That double-action is very good. It's what I was looking to achieve. Am so pleased with the double -action that I forgot to shoot it in single-action.
Chris, your service, shipping, product, and video tutorials are all excellent.
Amazing job, love the detail you've shown on the video.
Thanks Chris, glad to hear it was helpful Brother!
Decided to nickel plate my trigger and hammer since I had the lower apart. Looks great and with the spring set, it shoots as good as it looks and it looks great. Should be getting my slide back in 11 days with the optic cut for my Holosun 507k. Had the factory sights kept at the rear and had the slide finished in nickel. Can't wait to take her out for a play day at the range.
This video helped me out 100% thank you so much!
Now this us what I'm talking about. Great freaking video you definitely killed it.
Thank sir.
This video is a great tool. Thanks for putting up a guide!
Very informative video. I purchased the P07 kit and did everything to a mirror shine and made a huge difference in trigger pull, however, the trigger sometimes don’t return all the way without help
Nice vid and thanks. I must say that using a proper 3 mm roll pin pilot punch with round tip WILL prevent a lot of the damage shown to the striker roll pin.
Amazing video, even better kit. I'm in brother, faithful customer 👍
EXCELLENT VIDEO!
Tremendous video !! very informative and precise.
Great video!!! Great detail and quality of images. Thanks
Awesome! Glad to hear it Brother. Thank you
Excelentemente explicado, el desarme total y el armado, muy bueno. Felicitaciones
Wow what a video man! I'm a complete novice but now I'm sure I'll be able to do this.
Just installed my springs and polished everything. Single action is definitely light and nice. Double action is smoother and lighter. It’s still a slightly heavy pull but that’s what you want with a defensive pistol. All in all, I’m happy. It’ll be at the range tomorrow for testing
My install tip:
Don’t engage the trigger bar spring until you get the de-cocker installed.
ill try this when i get home . having a bitch of a time reinstalling the decocker
Just installed mine today, went smooth and easy thanks to your video.
Thanks Brother, glad to hear it!
did you polish up the surfaces too?
you like the outcome?
I absolutely love my P09... but that trigger...! This video is an excellent resource that I will be referencing in the near future.
Awesome! Thanks Brother for your Support! Let us know your results with the kit.
@@MCARBO Took me a while to get around to it, but finally got the kit installed, along with the polish job. I already had a "2,000 round trigger job" on my P09, but this still made a huge difference. Best bang for your buck upgrade you can get!
only one blood blister on my thumb (dont hit thumb with hammer lol).
Has a little issues getting the decocker back in to place.
But holy heck!!! That trigger is night and day!!
I didnt do a big polish job but hit some of the parts.
Great kit and the video made me not want to smash my gun in to tiny pieces
Excellent video as usual!!!!! Grant B.
Excellent video. Seriously.
Great video and well done and easy instructions!
Thanks! Very interesting and informative.
Buddy thank you very much!
I broke my trigger release in my CZ07 Duty.
Now, I know somehow how to fix it.
Drinking game idea: watch this video, and take a swig if your favorite beverage every time he says a part "locates" 😁😁... great video.
Thanks for this video. As I'm planning to perform some work on mine