Thanks for your honesty! I've been thinking about converting a printer to DTF. This really helps... Think I'll just keep buying transfers and let somebody else deal with the printer issues.
There are a lot of questions being asked but you seem to just ignore them. I think that it's awesome that you are sharing your experience as well as knowledge but being a bit more responsive will help us all. Love what you're doing. Keep up the good work.
Most of the questions are answered in subsequent videos. Some questions are actually answered in this video if watched in its entirety. I cannot get to every single question. There are over 500 videos with questions. Thanks for watching.
Who said this printer doesnt have a good rep ? This printer is all i see everyone say to get as far as the dtf conversion printers … this is the best printer ive ever used
Hi Mrs. Craftable things i love your videos. i know Mr. Jeff Curley he referee with we. he was the girls basketball coach their. he retired last year. I'm from MIAMI. NICE TO ME YOU. I'VE BEEN WATCHING YOUR VIDEOS FOR A WHILE.
This was a very detail for me since I thought I would skip the sublimation however, after your presentation and my own research you have confirmed that I need to wait. Also can you give the pro and cons on Epson ecotank vs Sawgrass? Thank you
Hey LaTonna!!! That's my next printer. I have a 15000 that I purchased for eco-solvent. I just haven't set it up, yet. Do you this the 8550 will be a better choice?
@@CraftableThings if its the xp-15000 both have the same max print resolution and print at 1.5 picoliters and I think both print 13x19. if its the et-15000 that specs are different. That one prints a lower solution photo but still nice for what we are doing. The ET- 8500 and the XP-15000 both produce more colors sincethey have 6 channels, so between the 2 it comes down to whether you want to deal with cartidges or tank. I would choose a the tank because the eco-solvent inks clog seriously. if is the et 15000 I would still choose the tank over the cartdiges even at reduced resolution for ease of use. hope this helps
@@CraftableThings hello and thank you for you respond im new in this sorry for to much questions the software to expensive to buy for me if i just print the imagen whit out of the software and use the dtf powder that work or not please respond
How is your Epson 8550 DTF printer? Is it still work and could you tell me how do you deal the white ink being that you have no access to ink cartridges?
The 8550 is an awesome printer. I just recently converted one. There are some great tutorials here on YT. And you may get someone who will respond to your questions. You can refill the tanks with syringes. It's easy and not as timely as it sounds. But you can install an external CISS system as well.
Hello, I am new to this so I am hoping that you could help me. I have downloaded Cadlink and I have my Epson 8550 setup but when I print it try's to save the image rather than print. Is there any suggestion on how to change this setting?
I haven't run into this problem but I have heard of a couple different solutions: one is to apply a strip of tape to the feeding edge on the backside of the film so that the printer sees the film; the other is to add the film only after you hit print and the printer asks to fill the paper source. I would probably try this one first since it doesn't require too much more effort. Let us know if this works for you.
Hi Patrice! I previously used my 8550 for a program called reveal. I have since removed the ink so I can convert the printer to DTF. I was wondering if it makes a difference as to the order I install my inks? I want to put black in the first tank as that is the color I had with the previous system; White was in the second tank, then followed by the three corresponding colors, and ending with white. Could I continue with that set up and then adjusted in the cadlink rip program?
Do you mean like a gang sheet or back to back images? Either way, if you use a software like PS or AI you can add your images to one sheet then save as png or svg then import to Cadlink to print. But it's possible to do a gang sheet in cadlink as well. After importing your images to print, nest them all. You should then be able to manipulate for sizing and proper fitting. But I am using the latest version of Cadlink
Hi thank you for the video and for going on details. I'm deciding if buying a dtf printer or a cricut for same purpose, making tshirts print. Which one would you recommend between cricut and dtf printer? I would have many white small logos to heat transfer and occasionally big prints. I already have a sublimation system but I need to heat transfer white on cotton tshirts. Thank you for your time and help
2 different things. dtf has not cutting involved. Cricut is strictly for cutting out designs. DTF only prints on top of a film, no weeding and you cure it and press it to shirt.
Does Cadlink put ink on the sheets of film?? Because I have the printer converted sheets are going through but I’m getting no ink on the sheets do I need cadlink????
Hi thanks for the video quick question how do you decide the way to do the ink colors I mean before was only 4 and now this printer is 6 ? Maybe is a dumb question but don’t know the answer thanks again for the video
I was wondering how do you excilly convert the printer. And also I have the actual dtf printer, and it is worst if you don't use it everyday. I don't recommend it, if a person does not have experience in it. Because it cost to much money if the heads go bad.
Good evening, I been attempting to start my Dtf with the 8550 as well but I have failed for that so man months . I just learned that my white ink is not printing in the back and I don't know why. I thought the channels were clogged but no, I cleaned them with the solution the other day and I still get the same results. Any idea I'm doing wrong or setting I need adjust ?
So this software is basically just to be able to print ? I can keep using my silhouette system go make my design and then pull over to Cadlink to print from my Espon print ? Is that correct ?
Hello, first of all, I love your channel. I feel very frustrated because I have invested a lot of money, I transformed my Epson 8550 thanks to one of your videos, I bought Adobe Illustrator but I had never used it but I took the risk because I thought it was not going to be very difficult and there is not enough information for the process since zero to prepare an image. I don't know what else to do 😕
Also for dtf how often do you need to buy ink? Does it run out fast? Looking into buying one for dtf and all the supplies but trying to do the math on if it’s worth it.
You can control how much ink you use, and the design complexity. But it uses not much more ink than printing on eco solvent vinyl or regular inkjet printing. And the 8550 is the best model to buy. Do yourself a favor and save $3000 and buy the 8550 and convert it yourself. Thank me later. Most of the issues with this are USER ERROR. Not on the printer. It’s been hassle free out of the box. Those procolored ones will clog on you shortly after using if you can even get it to work properly the first time.
Hi, great video. I'm not too certain your information is correct about that non necessity of white ink on a white shirt though. In my personal experience, a layer on white ink is necessary for the adhesive to properly adhere to the shirt. You can still print and press without white ink but the washability will be terrible and will likely peel/flake after the 1st wash and sometimes even before the 1st wash. I've personally experienced this with white shirts.
Good point! I haven't printed without the white. I know a few people who print without it and haven't heard of any issues. Thanks so much for sharing your experience. 💕
Amazing video! Question: This printer would print about 5-6 prints / hour from what i gather. I have a conveyor dryer that i dont want to keep running all hour for 5 minutes of drying. How long can i wait after applying the powder to cure? Can i apply the powder and leave them and then batch cure them all at once? in bulk? so i dont have the dryer on all hour long in between prints? Thank you in advance.
Okay that’s what’s wrong with my first couple of prints. I did t take the roller out for one. The other one is, the colors are in but the white didn’t cover the colors.
Hi Great video. I want to buy one of this printer for DTF. But question.. do I have to machancally convert the printer to work with DTF? Or it's works straight out of box for dtf
what are your actual settings. I watched your video and converted my printer and i keep getting a white background on my prints for my et 8550 that should not be there
Hello i am just wondering after doing researching on all supplies needed for DTF can you tell me what is the difference from the white powder and the black powder ? Also how long does the ink last ? I have done many prints using eco tanks Sublimation and its amazing how the ink lasts for a long time , will the DTF ink be the same ? Thank you so much for all your help you are amazing at what you do and I appreciate you keep up the great work
can you explain why your putting white in the black tank and black in the gray tank. I'm setting up mine and I've seen several videos and everyone is different .please help !
Ola boa tarde Como e o processo de balançar as tintas,pois a tinta branca e emborrachada ,caso ela fica um tempo parada pode causar entupimento na cabeça de impressão?
When my printer has to print white it doesn't come out and when I need black it comes out white I need your help I have followed all your steps with the printer I have put the inks in the same way as you but it doesn't come out could you help me I'm from Spain
Hi, Thank you so much, great video. I have a question and I hope you or someone in the comment section can answer. I have an epson 8550 but I already filled all tanks with inkjet. Can I still use it to print transfers? If yes how do I empty the tanks and clean the lines in order to refill with DTF ink? Please help. Thanks!
I watched your videos and turn my et8550 into dtf and set my colors the way u showed in one of your videos but for some reason I don’t see the white ink on top of the color, I don’t know what’s going on can u help by any chance?
Thanks for your honesty! I've been thinking about converting a printer to DTF. This really helps... Think I'll just keep buying transfers and let somebody else deal with the printer issues.
you have to buy rip software as well
Thanks Patrice! I appreciate your honesty and opinions about DTF.
Girl you are wonderful ! Thank you for always sharing and helping others really appreciate you ! ♥️🥰😘
There are a lot of questions being asked but you seem to just ignore them. I think that it's awesome that you are sharing your experience as well as knowledge but being a bit more responsive will help us all. Love what you're doing. Keep up the good work.
Most of the questions are answered in subsequent videos. Some questions are actually answered in this video if watched in its entirety. I cannot get to every single question. There are over 500 videos with questions. Thanks for watching.
Who said this printer doesnt have a good rep ? This printer is all i see everyone say to get as far as the dtf conversion printers … this is the best printer ive ever used
Do you need to check your inks after to converted?
Thank you so much!! I’ve had this printer in the box for almost a year debating whether to convert it to dtf or sublimation
what did you choose
How has your experience been with the epson 8550 in DTF? How do you do maintenance and how to shake the tanks?
Hi Mrs. Craftable things
i love your videos. i know Mr. Jeff Curley he referee with we. he was the girls basketball coach their. he retired last year. I'm from MIAMI. NICE TO ME YOU. I'VE BEEN WATCHING YOUR VIDEOS FOR A WHILE.
Thanks for this video and being honest about the printer, I still wish i could find it but it impossible in Illinois Love your channel
I love this printer for DTF
Colors look great. Lol the random eye blurring.
This was a very detail for me since I thought I would skip the sublimation however, after your presentation and my own research you have confirmed that I need to wait. Also can you give the pro and cons on Epson ecotank vs Sawgrass? Thank you
Hi
What paper do you use on your ET 8550
For DTF it's a film not paper. Unless you're using it for regular printing then it accepts paper up to 13"x19" for borderless prints. Happy Printing😁
What is your measurements for the boards you have in the printer and what settings do you have for the sheets
What do you do when you have issues with smears?
Can you share more about the platform you put to make it flat? How far do you put the platform in? How high?
Yes please
you the only want that telling what I need to ask you already answer . Nice video and good information. you style better than other.
I appreciate that! Thanks for watching!
How do I get the white ink to print behind the letters only? My white prints around the letters. Thanks. Love your videos.
Can we change colors of logos in candlink?
Hi how do you remove the rollers 😊
What do you do for the shake?
Are you going to show us how you made the wooden print thing?
Hey David,
I will try to make a duplicate to record a video on it VERY soon.
Hello. How do I get it from smudging
hi there, what do we set our paper size to on the converted dtf printer?
Great video! Excellent and very detailed. Thanks. Try eco solvent for the other 8550
Hey LaTonna!!! That's my next printer. I have a 15000 that I purchased for eco-solvent. I just haven't set it up, yet. Do you this the 8550 will be a better choice?
@@CraftableThings if its the xp-15000 both have the same max print resolution and print at 1.5 picoliters and I think both print 13x19. if its the et-15000 that specs are different. That one prints a lower solution photo but still nice for what we are doing. The ET- 8500 and the XP-15000 both produce more colors sincethey have 6 channels, so between the 2 it comes down to whether you want to deal with cartidges or tank. I would choose a the tank because the eco-solvent inks clog seriously. if is the et 15000 I would still choose the tank over the cartdiges even at reduced resolution for ease of use. hope this helps
I bought the 8550 thinking I would convert it to dtf. I decided I wasn’t ready for dtf yet so converted it to eco solvent. I love it!
Thank you nice video I have a quick question for you that process is only for dark color please respond
For dark and light colors
@@CraftableThings hello and thank you for you respond im new in this sorry for to much questions the software to expensive to buy for me if i just print the imagen whit out of the software and use the dtf powder that work or not please respond
how do you get the white ink on top of the colour
Hello and thank you for the info! Please tell me what oven your using for the 13x19” prints?
How is your Epson 8550 DTF printer? Is it still work and could you tell me how do you deal the white ink being that you have no access to ink cartridges?
The 8550 is an awesome printer. I just recently converted one. There are some great tutorials here on YT. And you may get someone who will respond to your questions. You can refill the tanks with syringes. It's easy and not as timely as it sounds. But you can install an external CISS system as well.
Can this do dark colors too?
How long did u keep it in the oven?
320 degrees for 20 seconds.
Hi! What ink do you use for this printer? Also the settings for the printer
How many washes till print starts cracking???
Hello, I am new to this so I am hoping that you could help me. I have downloaded Cadlink and I have my Epson 8550 setup but when I print it try's to save the image rather than print. Is there any suggestion on how to change this setting?
Hello, May i ask what is the best printer to convert in dtf? Thank you.
Can you do a tutorial with setting up the soft Ware cadlink or something. I'm struggling with telling it how to print
Hello, what do I do if my printer is no longer reading my DTF Film when I try to print? I have the same printer that you are using in the video?
TIA
I haven't run into this problem but I have heard of a couple different solutions: one is to apply a strip of tape to the feeding edge on the backside of the film so that the printer sees the film; the other is to add the film only after you hit print and the printer asks to fill the paper source. I would probably try this one first since it doesn't require too much more effort. Let us know if this works for you.
Hi Patrice! I previously used my 8550 for a program called reveal. I have since removed the ink so I can convert the printer to DTF. I was wondering if it makes a difference as to the order I install my inks? I want to put black in the first tank as that is the color I had with the previous system; White was in the second tank, then followed by the three corresponding colors, and ending with white. Could I continue with that set up and then adjusted in the cadlink rip program?
What are the dimensions of the board you use to keep film flat.
What paper setting do you use when using A3 paper?
If you can’t shake the ink then what do you do, to prevent it from coagulating? And messing up the whole printer?
What about an electric toothbrush? Vibrate the tank. I can think of other things but you get the idea.
Hello with Cadlink can you add multiple images to print at once? I have an erasmart with Acrorip 9 and I’m only able to print one image at a time. TIA
Do you mean like a gang sheet or back to back images? Either way, if you use a software like PS or AI you can add your images to one sheet then save as png or svg then import to Cadlink to print. But it's possible to do a gang sheet in cadlink as well. After importing your images to print, nest them all. You should then be able to manipulate for sizing and proper fitting. But I am using the latest version of Cadlink
Do you mind sharing the temp & time for curing DTF powder
Hi thank you for the video and for going on details. I'm deciding if buying a dtf printer or a cricut for same purpose, making tshirts print. Which one would you recommend between cricut and dtf printer? I would have many white small logos to heat transfer and occasionally big prints. I already have a sublimation system but I need to heat transfer white on cotton tshirts.
Thank you for your time and help
2 different things. dtf has not cutting involved. Cricut is strictly for cutting out designs. DTF only prints on top of a film, no weeding and you cure it and press it to shirt.
@@calw8085 thank you so much
I see that prints your print wasnt double-sided and you got rid of the lines..can i ask how ?
Can you tell me your setting for the white. I have the cadlink v11. But it's not putting the white on the back.
Could you tell us what you use to level the sheets, my printer damages the designs since the sheet is uneven and the head moves the white ink 😓
Does Cadlink put ink on the sheets of film?? Because I have the printer converted sheets are going through but I’m getting no ink on the sheets do I need cadlink????
Hi thanks for the video quick question how do you decide the way to do the ink colors I mean before was only 4 and now this printer is 6 ? Maybe is a dumb question but don’t know the answer thanks again for the video
@Ember Huang Do u have any ovens for sale? If so where do I go?
I was wondering how do you excilly convert the printer. And also I have the actual dtf printer, and it is worst if you don't use it everyday. I don't recommend it, if a person does not have experience in it. Because it cost to much money if the heads go bad.
I have a question, usually how many prints do get to do with a full tank on both whites?
can you explain the wood board i put one because my prints keep smudging but i cant get the right position
Very detailed video! 👌
Thank you for the video. It puts a lot of stuff in view. I would love to do dtf but maybe at a later date. Thank you
Hi, the headprinter in good? what is the model
Hey Patrice I have a converted dtf printer but I need to get the software what kind do you have
Good evening, I been attempting to start my Dtf with the 8550 as well but I have failed for that so man months . I just learned that my white ink is not printing in the back and I don't know why. I thought the channels were clogged but no, I cleaned them with the solution the other day and I still get the same results. Any idea I'm doing wrong or setting I need adjust ?
did you check your settings on the RIP software?
@@CraftableThings yes I thought I have but if you show me in what they need to be that would be great. I might have done it wrong.
So this software is basically just to be able to print ?
I can keep using my silhouette system go make my design and then pull over to Cadlink to print from my Espon print ? Is that correct ?
Hello, first of all, I love your channel. I feel very frustrated because I have invested a lot of money, I transformed my Epson 8550 thanks to one of your videos, I bought Adobe Illustrator but I had never used it but I took the risk because I thought it was not going to be very difficult and there is not enough information for the process since zero to prepare an image. I don't know what else to do 😕
Hi this printer can print white color in black paper?
Also for dtf how often do you need to buy ink? Does it run out fast? Looking into buying one for dtf and all the supplies but trying to do the math on if it’s worth it.
I am also wondering the same thing
You can control how much ink you use, and the design complexity. But it uses not much more ink than printing on eco solvent vinyl or regular inkjet printing. And the 8550 is the best model to buy. Do yourself a favor and save $3000 and buy the 8550 and convert it yourself. Thank me later. Most of the issues with this are USER ERROR. Not on the printer. It’s been hassle free out of the box. Those procolored ones will clog on you shortly after using if you can even get it to work properly the first time.
Why is my white ink not laying on the back?
The gildan t-shirt is a 100% cotton dear.
yes, I know. I mentioned it in the video. Thanks for watching! ua-cam.com/video/IpfDehxUxpY/v-deo.html
Hello I have this same process but can seem to get a good amount of white for dark prints can u help me
How is the washability of the shirts? Have you done any wash tests to find out how long the transfer stays on the shirt?
Hi, great video. I'm not too certain your information is correct about that non necessity of white ink on a white shirt though. In my personal experience, a layer on white ink is necessary for the adhesive to properly adhere to the shirt. You can still print and press without white ink but the washability will be terrible and will likely peel/flake after the 1st wash and sometimes even before the 1st wash. I've personally experienced this with white shirts.
Good point! I haven't printed without the white. I know a few people who print without it and haven't heard of any issues. Thanks so much for sharing your experience. 💕
I want to purchase on but not sure because of the price and the cost of paper, and ink?
Why my Et 8550 is not printing the white over laying the print
Beautiful. I love DTF but it is not very populair here so to find the products is very difficult. Thank you
How big image can you put in your oven? I am looking for the biggest size. Thanks
Can you print on dark garments?
Amazing video! Question: This printer would print about 5-6 prints / hour from what i gather. I have a conveyor dryer that i dont want to keep running all hour for 5 minutes of drying. How long can i wait after applying the powder to cure? Can i apply the powder and leave them and then batch cure them all at once? in bulk? so i dont have the dryer on all hour long in between prints? Thank you in advance.
I just started my dtf epson 8550. My white is not printing from my acro program. Would you know how to print? Can't even get to that part.
i removed my rollers and still have alot of streaking. what do i do?
maybe something isn't removed. Once, the rollers are gone, there is nothing to streak the image.
Okay that’s what’s wrong with my first couple of prints. I did t take the roller out for one. The other one is, the colors are in but the white didn’t cover the colors.
it wont let me change my ink setup in the queue/ and does not give me the ink order under the page tab
Hi
Great video.
I want to buy one of this printer for DTF. But question.. do I have to machancally convert the printer to work with DTF? Or it's works straight out of box for dtf
You need to remove the rollers and you have to have a RIP software to control the colors: DTF inks not the inks that come with the printer.
just set my 8550 up. I imported my print and it printed the white ink like a background on the picture I was printing. can you help with that
Have you found a dtf printer yet and if so which one did you get?
Not yet. I was looking at the L1800.
HEY Craftable Things. What is a rip software?Thank you for the review
what are your actual settings. I watched your video and converted my printer and i keep getting a white background on my prints for my et 8550 that should not be there
Why did you choose the 8550 instead of 8500? Thanks
It has five ink tanks.
Was planning on gettin 8550 so what's equivalent to it?
Epson expression xp 15000
@@kmallory5826 that's a expensive 1 i wanted the bargain a printer
Epson expression is 399. The 8550 is 799.
Anyone ever try infusing GAC 900 infusions to thin the white ink a little more to prevent clumping?
I haven't. I need to look into that.
Boa tarde gostaria de saber se vcs vende impressora DTF qual valor dela
i get a print error white empty how can i fix the issue thank you
TFS...U ROCK!!!
Thanks, Nicole!
Hello i am just wondering after doing researching on all supplies needed for DTF can you tell me what is the difference from the white powder and the black powder ? Also how long does the ink last ? I have done many prints using eco tanks Sublimation and its amazing how the ink lasts for a long time , will the DTF ink be the same ? Thank you so much for all your help you are amazing at what you do and I appreciate you keep up the great work
can you explain why your putting white in the black tank and black in the gray tank. I'm setting up mine and I've seen several videos and everyone is different .please help !
You can put the colors in whatever tank you prefer, as long as you have 2 white, a black, a yellow, a cyan and a magenta.
Ola boa tarde
Como e o processo de balançar as tintas,pois a tinta branca e emborrachada ,caso ela fica um tempo parada pode causar entupimento na cabeça de impressão?
I followed your video BUT I can not get the white to print on top of the design like yours did. Any suggestion (anyone)
When my printer has to print white it doesn't come out and when I need black it comes out white I need your help I have followed all your steps with the printer I have put the inks in the same way as you but it doesn't come out could you help me I'm from Spain
So you have to pay 400 for the software
If you want to print using all of the colors, yes. All RIP softwares are additional fees.
I'll check p bays😂😂
Es una Belleza de maquina aparte de barata y comoda es Mas facil de usar
Can you reuse the powder after using it?
Yes, you can.
The price tag on the app is stupid. Any place to get it cheaper?
Buy a DtF printer from a seller…most of them come with a rip software. Outside of that, ALL Rip software is expensive.
I'm having error code 031004. Any suggestions? Thanks
Hi, Thank you so much, great video. I have a question and I hope you or someone in the comment section can answer. I have an epson 8550 but I already filled all tanks with inkjet. Can I still use it to print transfers? If yes how do I empty the tanks and clean the lines in order to refill with DTF ink? Please help. Thanks!
i've seen videos here on youtube about empty and cleaning inkjets to DFT
I watched your videos and turn my et8550 into dtf and set my colors the way u showed in one of your videos but for some reason I don’t see the white ink on top of the color, I don’t know what’s going on can u help by any chance?
Check your settings within the software. Visit m.facebook.com/groups/dtfjourney/?ref=share&mibextid=S66gvF
This group is super helpful.
Am I blind or is there no link to show how to convert the printer?
The video is on the homepage of the channel.
Can you send me a photo of the front and back of your wooden output tool