Tip for any younger aspiring decal-er's out there. Plain old hairspray can be used instead of the toxic sealant. Also the first time you decal a helmet be extra careful. Something else that helps when decalling a helmet is to get an official lego clone helmet and to compare the helmet that you are decalling to get the placement and everything correctly. I hope i could have helped someone.
I dont really think it will scratch up if your careful with it, but be careful with the legs the hips need to be carved very carefully to stop tearing the decal.
Does the mould line remover have to be that specific brand? I know it may sound stupid but in all the videos about decaling I have watched it stated that specific brand and not just a mould remover generally, thank you.
I love the muunilist design, I agree this is a much cheaper way to get your favourite clones ina variety of styles, however it does take time and effort. I would recommend this to everyone even if it seems a little expensive at first
In my experience , I have found decalling quite difficult and they're easy to mess up. I love the way they look however and some people pre-decal them anyway 👍
im trying to decal arc fives and echo so i can finally have minifigures for them :) i will prob just try out some grunts now that ive seen this vid and then ill try to do fives and echo :)
Awesome vid! Would love to see a video about making these typa guys with paper like I did! I got the helmets from CAC after printing a clone torso print onto one of the torso cutouts u made! I have Rex, Cody, Gregor, Wolffe with helmets and Fox, Howzer and boy without helmets!
Like I mean it’s the best way to get a p2 Rex or a clone design LEGO doesn’t care about such as the 442nd siege battalion. It’s easy and hard at the same time but depends on your patience and even faith 🤣
He Said About Sand Paper And Metal Polish But You Can Just Use Nail Polish Remover Instead For Print Just A Bit More Messy Also You Can Use A Swiss Army Knife Because There Are Tiny Scissors That Are Better For Cutting The Decals Because Your Hands Dont Need To Be As Steady As An Exacto Knife
Are airborne decals easier than phase two trooper decals? I’m a beginner and I’m trying to decal a captain Keller and muunilist pilot decal. Would these two decals be good for a beginner?
hey i don’t know if you guys know this or not but don’t decal clones in a confined area, decaying contains a lot of harmful chemicals so its best to do it outside
If you don’t have the money for something like metal polish you can also use an eraser to get Rid of prints it takes a while buts it’s the cheapest option
I started using a masking tape method with AV decals so you don’t have to carve out hips or struggle with assembling your figure. Put small pieces of masking tape on the bottom of the hips, the hole the leges use to connect to the hips, cover the rod on the hips, cover the part on the arms that connect to the body, and put a thin line on the outside of the connection area on the body for the arms. Now of course you won’t be able to move the legs but I definetly recommend putting tape on the connection points on the arms, especially if you’re not using very detailed decals.
The best clone to start with is probably a p2 or p1 grunt. We talk about it a bit in the video. Hope that helps, let us know if you have any more questions :D
We have made a tutorial on (How to make custom lego star wars sholder poldrens and waist capes)-videos name. Where you can make Captain Rex’s poldren. :D
Tip for any younger aspiring decal-er's out there. Plain old hairspray can be used instead of the toxic sealant.
Also the first time you decal a helmet be extra careful. Something else that helps when decalling a helmet is to get an official lego clone helmet and to compare the helmet that you are decalling to get the placement and everything correctly. I hope i could have helped someone.
thanks for the advice! also question are decalled clone troopers good for stopmotion? or will they scratch up or etc.
I dont really think it will scratch up if your careful with it, but be careful with the legs the hips need to be carved very carefully to stop tearing the decal.
@@kevlarmonsieur4 if you dont want to carve the hips then you couls get 2008 style p1 clones and just not decal the legs
@@HowToRacist oh thanks bro
You did help thanks bro
Thank you so much! I loved doing the decals with you and the video turned out amazingly!
Your welcome! we did as well :D
Does the mould line remover have to be that specific brand? I know it may sound stupid but in all the videos about decaling I have watched it stated that specific brand and not just a mould remover generally, thank you.
Also thank you for linking my tutorials in the description. Hope they were helpful
I am really glad you have made this. I relay do want a lot of clones for my army but there expensive
I love the muunilist design, I agree this is a much cheaper way to get your favourite clones ina variety of styles, however it does take time and effort. I would recommend this to everyone even if it seems a little expensive at first
I love the muunilinst design too I got him
Usually decaling is cheaper
@@roguerangerproductionsWhetr did u get it
@@Sashin-d8t got them from thick brick
Does JONAK toys take long time to ship if so what’s the estimated days or months? Also where can I find 104th phase 2 pilot decals?
Hello can you do another moc contest it was really great the last time
In my experience , I have found decalling quite difficult and they're easy to mess up. I love the way they look however and some people pre-decal them anyway 👍
Can you make ur 2022 clone army?
im trying to decal arc fives and echo so i can finally have minifigures for them :)
i will prob just try out some grunts now that ive seen this vid
and then ill try to do fives and echo :)
The shipping is terrible if I want to buy some decals
its to hard to decal legos it will be messed up if we do something wrong or placed wrong
Awesome vid! Would love to see a video about making these typa guys with paper like I did! I got the helmets from CAC after printing a clone torso print onto one of the torso cutouts u made! I have Rex, Cody, Gregor, Wolffe with helmets and Fox, Howzer and boy without helmets!
i,v been decaling for about a year now
I really wish decals were precut. That would make it a lot easier and in my opinion. It would also leave less room to cut them and mess them up
Can you make a paper hood tutorial?
You need to do it on any custom clones?!
I wanna point out that Jonak actually does offer arm decals, you just have to buy them separately
Hi
As a person who often build plastic model I can say that I hate decaling.
Did you know you can also remove the printing off the torso by simply using an eraser from a pencil
😳
No
Now way
@@HelluvaOpp I know right
@@victorypvp9379 How is that possible
facts this is the cheapest way
Like I mean it’s the best way to get a p2 Rex or a clone design LEGO doesn’t care about such as the 442nd siege battalion. It’s easy and hard at the same time but depends on your patience and even faith 🤣
He Said About Sand Paper And Metal Polish But You Can Just Use Nail Polish Remover Instead For Print Just A Bit More Messy Also You Can Use A Swiss Army Knife Because There Are Tiny Scissors That Are Better For Cutting The Decals Because Your Hands Dont Need To Be As Steady As An Exacto Knife
JonakToys is a robber man I’m waiting for 4 MONTHS for a 30 dolar order wtf !
There is no cheap way unless buying fake figures I really hope this video proves me wrong
Really dope!
Are airborne decals easier than phase two trooper decals? I’m a beginner and I’m trying to decal a captain Keller and muunilist pilot decal. Would these two decals be good for a beginner?
Can u do an imperial base moc series, because the moc/Mocs that u made when u were called sanders3lego were amazing
I like decaling because it’s the only way I can get a plain white phase 2 clone trooper for a cheap price
hey i don’t know if you guys know this or not but don’t decal clones in a confined area, decaying contains a lot of harmful chemicals so its best to do it outside
Thanks!
If you don’t have the money for something like metal polish you can also use an eraser to get Rid of prints it takes a while buts it’s the cheapest option
I Can’t wait!!!!
I love your films! please record more often
Yoo let's gooo
This is the half of the Battlefront 2 Lobby on Kashyyk
cool! 😃
Is it supposed to take a long time for yoir order to come in Ive been waiting dor 3 weeks now and I have gotten no update from that website
I started using a masking tape method with AV decals so you don’t have to carve out hips or struggle with assembling your figure. Put small pieces of masking tape on the bottom of the hips, the hole the leges use to connect to the hips, cover the rod on the hips, cover the part on the arms that connect to the body, and put a thin line on the outside of the connection area on the body for the arms. Now of course you won’t be able to move the legs but I definetly recommend putting tape on the connection points on the arms, especially if you’re not using very detailed decals.
thanks
Finally a video about decalling and can you guys tell what's the best clone for a starter
The best clone to start with is probably a p2 or p1 grunt. We talk about it a bit in the video. Hope that helps, let us know if you have any more questions :D
@@Sanders3Studios OK thanks
nice
i stared with av
Warhammer lends nicely to other hobbies.
The link for the blank body doesn't work
Do you know of any decal sellers in Australia
This looks awesome! I can’t wait until tomorrow
Hi
Great video but i dont find the blank parts on the Lego site do someone know how i can find them?
I think its only the legs that are blank (white) we got a Zane ninjago body with a black background, because it was cheaper than the white bodies.
Can’t wait for this it looks epic
I couldnt do this even if i wanted to
this is amazing how do you do it?
awesome video!
When are u gonna make a vid making the Pauldron in the captain Rex vid
We have made a tutorial on (How to make custom lego star wars sholder poldrens and waist capes)-videos name. Where you can make Captain Rex’s poldren. :D
Would u recommend decalinh?
yes. :)
I’ll try it
I can't decal for crap 🤣
Can't wait looks cool
Yay can’t wait!
Great video guys, very well detailed!!!
Thanks so much!
@@Sanders3Studios you’re welcome
Seeing you slide it off thr clone and reset it made me a lot more confident to start when my decals come.
Whoops auto correct
Very helpful
Where do you get the decals themselves? Brick mania?
Oops nvm
On Jonak toys, thiccy brickie, and coffee mug decals. :)
Idk but I cant stop watching this , its just to good !
*decaling
This really makes me want to decal my own clones as well
I love these decaying videos I hope to see more of these soon!
What was the total cost
In what program do you edit your films?
I-movie!
I was about to ask them the same question
Dang bro! you got a sweet decal collection!!! :)
i wish i could do decals but i live in Ukraine so shipping from america or other countries isnt cheap...