Це відео не доступне.
Перепрошуємо.
Removing Popcorn Texture? Here's the Step by Step method of removing it RIGHT in 2022!
Вставка
- Опубліковано 31 лип 2024
- BEFORE YOU ATTEMPT TO REMOVE YOUR POPCORN TEXTURE, YOU NEED TO WATCH THIS FIRST. I have removed over 500 popcorn ceiling textures and wanted to pass on my expertise in this area.
Watch this playlist next for even more mudding skills you need- ⭐ • Taping & Mudding Drywa...
If you like learning drywall skills, subscribe but BE SURE to hit the ALL Bell or you won't see notices of new videos.
☑️ DrywallAcademy.com Online Drywall Training Courses from Beginners to Pros ☑️
(Popcorn removal courses coming soon)
1- UNDERSTANDING DRYWALL MUDDING MATERIALS - ALL ABOUT Drywall joint compounds including ready mixed, Fast Setting (hot mud), all types of joint tapes, what goes with what, and what doesn't. This is your complete resource for understanding drywall materials.
⭐drywall-academy.thinkific.com...
2- DRYWALL TAPING AND FINISHING FOR BEGINNERS - In this course you will learn how to choose and use the right materials. You'll learn the mistakes that novices often make that leads to failure, and ugly workmanship. I'll teach you how to do it right including all the little details like how to hold your tools right, how much pressure to apply, and the mistakes to avoid. You'll learn some simple repair techniques, as well as the basics of finishing new drywall.
⭐drywall-academy.thinkific.com...
- MY DRYWALL TRAINING EBOOKS -
🟢 Take the next step in learning. Read my new ebook "How to Quickly Improve Your Mudding Skills" at: geni.us/DrywallsecretsEbook
🟢 Learn tips & tricks for spraying Knock Down Texture- geni.us/knockdownebook
🟢 And you'll find even MORE ebooks and guides in my store.
🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒
- - - - - - (we earn 3-5% on these sales, thank you) - - - - - -
☑️ LEVEL5 Drywall TOOLS (Financing Available)
Click the Links below to see the current sale prices
🟢 A good all around Mud pan and knife set- geni.us/ize6U
🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx
🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH
🟢The NEW Drywall taping Banjo is awesome - ?ref=thatkiltedguy
🟢 For a Hawk & Trowel Set- geni.us/urlJsH
🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBoxCombo
🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6
🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj
☑️ Miscellaneous Drywall Tools
🟢 Radius drywall Sander, great for beginners to pros- amzn.to/3sTRQ3S
🟢 Affordable Texture sprayer hopper that I USE - amzn.to/47PWcYn
🟢 The BEST Texture Knockdown Knife - amzn.to/3sWxKWs
🟢 Vevor Vacuum Drywall Sander - amzn.to/3RGfeLr
🟢 Heavy Duty Mud Mixing drill) - amzn.to/3sQcVMy
🟢 For our full drywall tools store- www.amazon.com/shop/thatkilte...
☑️ TapeBuddy Tools
Mixit Paddle, works with Cordless Drills - US Link- amzn.to/3RgCMGL
🌏 International - geni.us/MixitPaddle
🟢 TapeBuddy simple taping tool - amzn.to/3KN9tVY
🌏 International link geni.us/TapeBuddyTaper
☑️ Miscellaneous Tools
🟢 The BEST SIMPLE Stud Finder I've Ever used- US Link amzn.to/3GdWDQJ
🟢 A nice hard case for the stud finder - US link amzn.to/3GdWDQJ
🟢 The best paint extension pole 2-4' US Link- geni.us/extensionpole
☑️ WEBSITE INFO -You can find a lot more tool links and suggestions, plus bonus information on our website at: www.thatkiltedguy.com
Want to show your support for our channel and help us put out more videos, join our Patreon page at: / thatkiltedguy
#ThatKiltedGuy #Drywalltips #DrywallRepairs #drywallschool #howtorepairdrywall
DISCLAIMER : TKG Enterprises LLC, cannot guarantee against improper use or unauthorized modifications of this information. We assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result, or any obligation for future assistance. Watching the video does not form a professional relationship or constitute receiving professional advice.
Tool links below. ☑ Attention all Drywall enthusiasts! Introducing the Drywall Academy, your ultimate online destination for mastering the art of Drywall. Whether you're a complete beginner or a seasoned professional, our comprehensive courses cater to all skill levels.
At The Drywall Academy (drywallacademy.com), we believe that knowledge is the key to success. That's why we are meticulously curating a vast collection of courses, featuring hundreds of lessons, covering everything from the fundamentals to advanced Drywall business building skills, texture application, texture matching, and much more.
Founded by Guy Purcella (That Kilted Guy on UA-cam) with 40 years of experience. With our easy-to-follow text and video lessons and practical demonstrations, you'll gain the confidence and expertise needed to tackle any Drywall project with ease, less frustration and a better quality job.
Don't miss out on this golden opportunity to level up your Drywall skills. Join the Drywall Academy today and unlock your true potential in the world of Drywall. Visit drywallacademy.com now and embark on a journey towards mastery! 🚀
And if you are confused about which drywall tools and materials you need, pick up my Drywall
Tools and Materials book on Amazon at: amzn.to/3T4eEZg
Or for a signed or Spiral bound version visit www.ThatKiltedGuyStore.com
Watch this Playlist called Taping & Mudding Drywall School NEXT- ua-cam.com/play/PLCrazHylAOEndyM-LGT6PtbGfIYD5uiy-.html
☑ Get my 56 page Free eBook "Understanding Drywall Tools and Materials" at www.DrywallToolsBook.info
⭐⭐ ⭐ Please Visit my sponsors below, they help me afford to put out these videos ⭐⭐⭐
☑ DO YOU VALUE YOUR INTERNET PRIVACY? I do. You can surf anonomously with Surfshark- geni.us/getsurfshark
☑ Protect your home or business with Simplisafe, we love it- share.simplisafe.com/x/qobGJE
⭐ MY DRYWALL TRAINING BOOKS FOR SALE at www.ThatKiltedGuyStore.com ⭐
☑ WEBSITE INFO -You can find a lot of bonus information on our website at: www.thatkiltedguy.com
🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒
- - - - - - (we earn 3-5% on these sales, but these are tools I recommend thank you) - - - - - -
☑ LEVEL5 Drywall TOOLS (Financing Available)
🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBoxCombo
🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6
🟢 A good all around Mud pan and knife set- geni.us/ize6U
🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx
🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj
🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH
☑ Miscellaneous Drywall Tools
🟢 Radius drywall Sander, great for all- geni.us/Radiussander
🟢 Affordable Texture sprayer hopper that I USE - geni.us/Hopper
🟢 The BEST Knockdown Knife - geni.us/KDKnife
🟢 Vevor Vacuum Drywall Sander - s.vevor.com/bfQtGq
🟢 For our full drywall tools store with my suggestions- www.amazon.com/shop/thatkiltedguydiyhomeimprovement
☑ Miscellaneous Tools
🟢 The BEST SIMPLE Stud Finder I've Ever used- geni.us/FranklinStudFinder
🟢 A nice hard case for the stud finder - geni.us/FranklinCase
☑ Miscellaneous supplies
🟢 Guardz torn paper sealer. Stops Torn Brown Paper from bubbling - geni.us/Gardz
DISCLAIMER : That Kilted Guy Video Productions LLC, cannot guarantee against improper use or unauthorized modifications of this information. We assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result, or any obligation for future assistance. Watching the video does not form a professional relationship or constitute receiving professional advice.
Hey everyone, first off, I apologize for the long intro. This video was actually shot on 3/29/2017, back when I was real new to this. It's NOT my best quality video, and yes, I did narrate too much. I have worked on getting to the point much quicker these days so if you watch some of my latest videos, I get to the point quicker. It's funny because this video has never gotten a lot of attention, then suddenly, UA-cam started showing it much more and it has gone crazy lately, getting 15,000 views a day and I'm thankful, but I am working hard to put out better quality content all the time.
I actually will be shooting a popcorn removal video again soon, so be watching for a much better version. It will have better lighting, better sound and more to the point. So I thank you so much for understanding that being a UA-cam creator is a learning process, and I am working hard to get better, and I do value your feedback as long as it's polite. Thanks and see you on the next video. Guy
That Kilted Guy DIY Home Improvement ,
Hi sorry if I was a bit blunt in my first comment to you, this was the firs time I had seen you, I, ll havee a look for some more of your vids just to compare 🤔🤔😁
Thank you for apologizing for your long intro. I was just going to the comments to complain in rude words.
chris marshall hey I appreciate knowing where I need to improve so thank you. I NEVER thought I'd have millions of people watching me on UA-cam and this whole thing is a Huge Learning experience. But I do listen and I'm trying hard to put out much better videos
Tony Lol thanks. I do appreciate the constructive criticism as it's how I learn what I'm doing right and wrong. I'm working very hard on putting it better videos. Take care
As a painting contractor I do these removals fairly often. Personally I like to use the popcorn removal knifes that have the bags on the end to catch the majority of the texture. I still mask all floors and walls off completely but they help with keeping the job clean quite a bit. Also airless paint sprayers work great to spray the water on. I like to spray the texture with water 2-5 times while waiting 10-20 mins between. Good points in this video!
Do you have to worry about water damage when wetting the ceiling
@Katelin B as long as you don't get it extremely wet it won't damage it. In the past I have even used a garden hose with a nozzle. If you use an airless it's actually somewhat difficult to get it that wet. Key is lots of coats, medium sized tip, 517 works great.
What popcorn removal knife w bag attached do you like to use? Thanks!
@@katelinb9224Yes. You also have to worry about damaging the drywall creating more work. Honestly the best method is drywalling over it. Not to mention asbestos.
Finally an experience construction guy that can explain exactly what to expect, not A DIY home owner making stuff up.
I've been in construction for 40 years, and this guy covered just about you need to everything know and the problems you might likely run into.
Excellent job.
yeah, I wish DIY homeowners would quit trying to teach how to do drywall. They miss too many things and often make mistakes and then teach the viewers how to make the same mistake. that’s a big reason I started my channel.
As a 3rd generation plaster, I was very impressed with this video, I have popcorn texture in my house and have thought about removing it, these steps you have shown were spot on, this is how I would/will do it. THANK YOU KILT GUY, GREAT VIDEO
Thank you so much for this video! My husband and I are now 66 & 58 respectively and while we've done a ton of diy stuff we were not at all sure what to do with these popcorn ceilings! Now we feel like we can! Great detailed info and great help with prep! Thanks
Did you guys ended up doing it? If so, how did it turned out?
Came for the popcorn removal, stayed for the kilt.
Thanks!
Atleast he is not using a ladder haha 👍
1lkydad 75 some want me on a ladder....
@@ThatKiltedGuyDIY haha you the man! Btw thanks for everything. You really helped me along the way with my popcorn removal job.
Still in process....
1lkydad 75 glad I could help
Kilted Guy, You are awesome! Your explanations are excellent - very easy to understand, logically organized, and well articulated. I just subscribed. I love that you were in the Air Force too. Thanks you x2 for your service to us all!!!
Thank you very much! I just pinned your comment to the top. Thanks!
@@ThatKiltedGuyDIY Wow. I'm honored! Thank you. :)
Was not interested in removing the popcorn surface from my ceiling but curiosity of "How To" do this & that eventually got me to your video. Never intended to watch from beginning to end but I did. What kept me going was your SUPER EXCELLENT tips, cautions and over all explanation. This was perhaps the very best Tutorial type videos I have ever watched. NOT because of the type of project, but because of how well it was organized and explained. Thanks
Wow. I really appreciate hearing that. I do work hard at teaching more in detail. Thanks, Guy
Thank you sir!
I’m a true novice and I plan to use your step by step info soon. You explain everything so well; thanks again!
Hi Marilyn Randall, thank you for commenting! I truly appreciate you taking the time to say hi, thanks or ask questions. I hope to hear from you again! 😎🦶🏼
Looking forward to using your techniques on my popcorn ceilings! Thanks for the very thorough instructions!
Thank you for your service! I too am an AF Vet. Thanks for this video as I will need to remove the ugly popcorn from my grandmother's ceiling. God Bless
Super job demonstrating how to remove. I have had several people ask me recently if I do popcorn removal. After watching your detailed demonstration and tips I fell more confident about taking on a job to remove it. Thanks !!
Thank you a lot for that comment. You guys are why I try and explain it thoroughly, but I keep getting comment after comment that I’m talking too much. I have actually tried to cut my talking down quite a bit but I still have to talk a lot to explain things so that you understand the hows, whys, and what ifs.
Thanks, Guy
this is the most well structured youtube video ive seen. thank you
This literally helped me do my entire house! Thank you so much for your awesome videos!
This video is extremely thorough, well worth watching! Helpful for any novice or person crazy enough to DIY.
Scherrie Goettsch thanks so much!
Thank you for sending me this video. I have a lot more work to do on my ceilings before I texture it.
I sure am glad I found your channel
I watched a few other videos and wished I had seen this one first! I so overworked!!! Thank you. I am a fan.
Glad you found us, and I'll try my best to save you money, time, effort and frustration by showing you the right way to do it. Thanks!
New home owner about to take on this diy, and I gotta say… you couldn’t have made a better video tutorial pretty much answering all the questions that I felt I wanted to ask. Thank you sir!
So did you do the job?
I literally just finished the DIY removal in my own home. The home has been completely renovated because it’s just all garbage, carpet, vinyl flooring etc.
we removed the flooring, floor boards and zero furniture in the house. I laid plastic down and wet the ceiling and scraped with two other people. We wore masks and goggles and gave ourselves a blow job after, pun intended. Got the 800-1000 square feet done in 1 hour, cleaned any lingering material with a vacuum for about two hours after.
You can either live with it or get rid of it and I was not going to live with it (probably still will if it’s in my lungs!). My house was built in 72’.
I am doing my kitchen. The thing I wished I had known about is the vacuum sander. I used an orbital sander, and had a lot more dust. Also, I was eliminating a soffit. So after I got the soffit down, I had to install wallboard on the ceiling and wall, and replaced wallboard around a light fixture that was used to char the wallboard and crack it! I used very hot water without detergent, scraped the whole popcorn ceiling. After it was dry I used Gardz first on my gouges from scraping, sanded the old wallboard at the edge, and taped the joints first with a couple of coats, then after it was dry, troweled the whole ceiling with no sanding on most of the ceiling before troweling. I did not have any nail issues. I am not quite finished, so I might rent the sander at the end. Great video.
As always, the Kilted Guy does an amazing job of explaining how a pro does it. I have watched many of his videos. One of my favorites!
I personally did not find that you were rambling on at all. Great instructions all the way !! You nailed this video by covering the entire process from start to finish AND , THREW IN A TON OF PRO TIPS. Really appreciate you for passing on these video GEMS . I subscribed and have seen a number of these GEMS. Thank you for being a leader by example, for putting out great content and going the extra mile to improve our viewing experience. Thank you.
Thanks, I appreciate that and it’s good to know. Guy
In the 80’s I would come home for 30 days leave from the military and work finishing drywall with my brother in law. Your honest attention to detail is correct and very much appreciated. Lessons I learned over years back then still apply today. Keep making the video’s “too long” because you cover the little things make a job go from, yeck to emm ok, to WoW! Well done Sir. One example of the work we did is still on display at the Ford Presidential Oval Office replica in the museum in Grand Rapids, Michigan. Thanks for bringing back tips I had long forgotten.
Thanks, glad I could help you out 😎. And thanks for subscribing!
Kilted Guy - Excellent description! I just finished doing a small room this afternoon. Now onto some sanding, minor filling & prep for paint. Thank you.
Sounds great!
Really enjoyed this video - plus your patience in working with popcorn ceilings!
Great detailed presentation, thank you for such a professional approach to helping others.
YOU CAN NOW FIND ALL THE TOOLS IN OUR VIDEOS at our Amazon Influencer store below. I put this store together to help you choose Quality Tools
and to simplify your choices. We have drywall hanging tools, Finishing Tools, General tools, Shop Vacs, Cordless tools, Panel lifts and
supplies, gift ideas and more. You can find it all at- bit.ly/GuysAmazonStore THANK YOU for using our link.
Great video, I’ve had three contractors tell me they won’t touch ours. It was done in1989, but was painted in flat white about 15 yrs ago ( soot from furnace malfunction ). At least you’ve given me hope thank you!
Oh wow! Plenty in our area want to do it.
Love the detail. Thank you so much for putting in the time to make this video! :)
Thank you for your support
Great video. After watching I actually feel like I could do this. I hate our popcorn 🍿 ceiling. One more thing, thanks for not using any of that obnoxious music. Look forward to checking more of your videos out.
Thank you. I am always working on putting out better videos. I'll be doing another whole house popcorn removal soon and will put out an even better video then. See you on the next one!
As a mom of 4 boys your videos have helped to get started on fixing their mishaps! Thank you from the bottom bottom of my heart, I appreciate you making these videos. 😊
Thank you and Thank you for subscribing
SNAP! I have been watching so many of your videos and just found out you are in my state! This girl is taking a mini retirement….. and have been fixing the cracks in our house again after getting the foundation fixed (7+8 years ago) Just east of the foothills here, in Morrison. Gotta love the bentonite……..
Great video with lots of detail :-). You make it look so simple! I don't think I will try to tackle this all by myself, but at least I'll have a better idea of the amount of work involved when a contractor gives me his overall cost estimate. Plus, this video will help me ask better questions of the contractor before the job is begun. Thank you very much!!
Joan, that's awesome. I know a lot of you won't attempt all these tasks, but you will now have a better idea of how it should be done and how much work and mess is involved. Plus, you know what the contractor should state they will do. Many who claim they can do it, won't do all these things and you'll end up with a low quality job. So I'm glad to help.
You expressed my thoughts exactly! IF done correctly, it is a ton of work
Amazing video!!! Always wondered How to remove that popcorn.
Definitely looking forward to see your work.
There's several ways and I've tried most of them, but this way is my favorite. Do you have some you're needing to remove? 😎👣
I liked your presentation. A lot of knowledge, well telegraphed. Thank you, dennis!
Thank you Dennis.
Great video! Loved your humor and great tips. I have several rooms in my house I plan on tackling, I feel prepared thanks to you!
Glad it was helpful!
This is the best explanation and display of how this is done I have seen!
Hi Kilted Guy! (love that). Just sharing that my husband and I removed popcorn from three rooms (so far). What a mess, even with taping and removing furniture. Our house was built in 1987 and the ceiling hadn't been painted. I like how you advised to really wet the surface and wait. We did have to spray ours several times and then lots of touch up and repairs. We were hiring a professional to skim coat the whole thing and then sand and prime/paint. One note to share is to turn off heat or A/C as the drywall dust will migrate to every room. Another thing I'd mention is having really good lighting for the clean up/repair work and even to inspect after final sanding and priming. Things just show up during each phase. I think you provided a great narrative with good advise and I watched the whole thing and learned a little more than before. Great video, thanks for posting.
ps: we have a cathedral ceiling with beams.....and popcorn. I'm rethinking things and might put up the lighter weight drywall instead of working between all those beams! Thought about using some type of flooring on the ceiling but not sure yet. Not looking forward to the mess either way
Pam, thanks for sharing. Yes, the popcorn removal is about the messiest thing we do in drywall. And that's great advice to turn off the heat, IF you have forced air. IF you have ANY vents that draw air in, either cover them up, or turn off the system. And good lighting is KEY to doing a good job of finishing. I use a portable light on a stand as I can move it around as needed, and the more you shine it Down a surface, the more it shows the defects. If you get a chance, send us some pictures of one of the rooms. Before and after, or just after, and I'll feature it on my Facebook page at: facebook.com/profile.php?id=709003475845845&ref=br_rs and other places like my website, etc. I love customer before and after pics. Thanks again and take care.
I do understand fully. It's soo much more work than most people realize. I've had to quit doing them entirely due to my vertigo not going away so trying to do this channel full time. I would say though that doing an overlay is NOT easy. If I have a choice, I would go with removal any day. OR consider tongue and groove ceiling boards. Good luck, and keep me posted.
I lived in a house that had silver glitter popcorn ceilings. I personally thought it was beautiful. I was young, in my teens and I lived there at least a year before I realized it lol.
My little brother and I would tease our friends and joke how we didn't see the glitter lol. Some would get so bent out of shape trying to figure out if we were kidding or not. Too funny. Thanks for reminding me!
And great video!
I love the way you laid it down bro coming from a union painter and done a lot of ceilings like that. Keep up the good work and I'll keep on watching
Thanks Kevin, I appreciate that and hope you took a second to subscribe. I have a goal of hitting 100,000 subs by my birthday, on June 10th.
Prayers out to you your videos help me out a lot and I keep coming back for a refreshers please don't take your videos down keep them up God bless you and prayers again be praying for you 🙏🙏🙏🙏💞🙏🇺🇸🇺🇸🙏
My attached garage was converted to an extra room in the 1970s,and I used it as a business office / recording studio and it has the popcorn ceiling. In 2014, I repainted the entire room, added cedar wood trim and painted the ceiling with white paint and it looks great. It's the only room in the house that has this type of ceiling so I am going to leave it alone. But thank you for the video, I may get a wild hair one day and decide to re-do the room.
Finally someone who addresses the drywall tape at the edges and cleaning it up! I've scraped almost every room in our house and managed to keep the tape in pretty good shape, but it was a real surprise in the beginning and freaked me out. We'll probably put up crown molding still to better cover the popcorn I didn't quite get out of the crack. Thanks for your videos! I also scraped my ceilings barefoot! Haha
Mary, thanks so much for the comment. And I find it silly why people get so worked up over me working barefoot. It’s not like there are boards with nails laying around it’s a carpeted floor most of the time or plastic in this case. Good luck with the crown molding if you go that route, and be sure and study the technique well as it’s kind of tricky to make the miter cuts. Thanks again, Guy
You can remove popcorn from your crack by just putting more butter on it!
Lol M Ladd.
Very helpful to understand the amount of work required to get this job done. Thanks
You are welcome!
Enjoyed your video it popped up in my screen. I live in Florida and most houses have popcorn ceilings. I only have it in my bedroom and I hate it. It is a 1980 mobile home. I found this information very interesting and informative.
Video was fine... great explanation for anyone that's never done this.
We used a small paint sprayer (Graco 395) with a 2' wand for getting water on the ceiling (Dawn or Krud Kutter if there was paint, just water if there wasn't any), and my partner was doing it this way when I joined him. I wasn't good from the ground with the 10", but one day I was stilted up (just taped all the ceilings) and asked him to hand me a 6" knife for each hand, to see if I could do it better... wow was it a cleaner, faster job and the ceiling looked like it had just been mudded & taped. For everyone after that first one, we'd have a king-sized mattress bag hanging on 4 corners of a 6'x2' scaffold and we made bank cleaning those.
My partner would pull the scaffold around the room in front of me. Got where I could drop ~95% of the popcorn in the bag. Hardly left anything on the ceiling. (We had the Porter Cable, but after it dried, just a quick dusting (under a minute per room) with a Radius360 sanding pole would get it clean enough to skim or prime (depending on how bad the original ceiling was). Best part was, since most of the popcorn was in the bag and we used a paint sprayer, very little spray fell down, so the floor stayed pretty dry. We'd sweep the small amount that hit the floor to the corners and get that the next day, but since the huge bag of popcorn (from the entire job) was sitting on the scaffold boards, we could roll the entire thing outside to a dumpster and throw it away.
I haven't done it since my 40s, and he's long since retired (in his lower 90s now), but with young shoulders pushing two 6"s on stilts, it was really fast & effective.
Nice and thorough description! I dealt with my 'popcorn' several years ago on my 3600 sq ft house. I used a bit different method to minimize the mess. I emptied out the room first, laid down rosin paper, and using a garden sprayer, a scaffold (particularly important for my 10 ft high ceilings in some rooms) and two tools. I used the same 6" bladed, round putty knife blade seen in your right pocket, which I rounded the corners on first. I then took a paint roller tray (metal). Holding the putty knife in one hand and the paint roller tray in the other, I scrapped the asbestos-laden popcorn a section at a time. I used my garden sprayer to wet the ceiling, a section at a time. Perhaps I had a bit of an advantage over others--my popcorn was laid down (up?) over a masonry-mortar ceiling which encapsulated the tiny wires in my radiant heat ceiling. (House is vintage 1967 in Southern California). Wearing a respirator and glasses for safety, I would scrap the moistened popcorn into my roller tray, and as it would fill, I would dump the tray's contents occasionally into a kitchen trash bag which, when full, wasn't stupidly heavy. My goal here was to avoid getting this stuff into the air, and leaving a mess on the floor. To me, it saves a significant step--clean up! I avoid getting this stuff into the air as it only falls about 12-18 inches into my paint tray, rather than 8-10 feet to the floor below. Being the owner-operator, I was able to legally dump all of this popcorn material (even with asbestos) into my garage can and my local trash company hauled it away like any trash. Once the ceiling was thoroughly dry, I would go after it with a standard kitchen broom to remove any more of the loose stuff. Rolling up the rosin paper, into the trash it went as well. I didn't own a shop vac at the time so you can do this quite simply with the minimum of tools. (1) Respirator, (2) 6" putty knife, (3) paint roller pan, and (4) a bunch of kitchen trash bags. Remember to check your local regulations regarding doing this yourself, and how you may legally dispose of this stuff. I figure I saved a small fortune because I understand that when you hire a professional to do this, they have to follow a myriad of OSHA rules and regulations that drive up the cost! Thanks for sharing. Go Air Force (me too).
Thanks for your service!
I really appreciate your videos and knowledge. I've used your advice on many projects and it has saved me hours of time. Also I appreciate your support for the Air Force. I'm a 25 year Air Force veteran. Aircraft weapons systems Tech.
Cool, I was an electronic warfare tech myself
We used a hose nozzle called rose duster , adjustable and worked as well, nice job!
!!
Thank you for the education! You're a great teacher! Love the kilt!
Thanks for all the compliments, I truly appreciate it.
BAD NEWS- Hey everyone, as of 9/21/20 we have some bad news. We are suddenly being kicked out of our rental due to the sale of the home, (we were planning on buying next summer) and I'm having some tough medical issues such as Prostate Cancer, Permanent Vertigo, Restless Legs, Neuropathy (nerve damage) etc. So we put out a video explaining this and many of you asked us to create a Gofundme so you could say thanks for all the help I've given you on these videos, my comments, etc. I really hesitated, as I hate asking for donations, but then you said it wasn't a donation, it was a way for you to say thanks. So if you want to know more here's the video explaining what all has been going on (moved 9 times in 12 years, my wifes 3 knee replacements, my cancer, $7,000 dental Bill and much more). ua-cam.com/video/aRMwK_LTQQs/v-deo.html
You can also just read about it on the gofundme page at: gf.me/u/yzzrkz
NOTE: please don't contribute if it puts any strain on you at all, and there is zero expectations, or anything like that. But if you'd like to give back, Thank you.
PS: SUBSCRIBE - (help me hit 100,000 subscribers by June 10, 2021, my birthday)
Be sure to subscribe at: goo.gl/hCyPDk and BE SURE to click the bell after subscribing to get notified of all future videos.
ONLINE STORE & AMAZON LINKS
Here's some links to tools I mentioned in the video. (we do earn a TINY commission on sales, but it costs you nothing more, so thank you for your support) Anything you buy counts, even if it's vitamins. Thanks for your support.
OR, for these specific tools, click the link below.
A list of power drywall sanders- amzn.to/2BPawEc
To buy one 24 grit sanding disc at a time, I have these available for you on ebay at: www.ebay.com/itm/173894798026 I have limited quantities.
SHOE COVERS- amzn.to/2REgXkn
Drywall rated vacuum- amzn.to/2EuXygw
Weed sprayer water pump- amzn.to/2P9zIc5
Extension pole for scraping. Don't buy the cheap ones, they won't hold up. This one's the best. amzn.to/2Q9wESZ
Popcorn Ceiling Scraping tool for small areas - amzn.to/2HcOVcc
EZ Strip Popcorn Ceiling stripper for painted ceilings - amzn.to/2tPEGmh
For a whole page of Drywall Sanders go to- amzn.to/2M5HNip
Texture sprayer- amzn.to/2L1jWjb
Mesh Tape dispenser- amzn.to/3nE7Wqf
Guardz torn paper sealer - amzn.to/2L3tl9V
For a full mud pan and knife set- amzn.to/2KZG8u9
Sometimes God wants us to swallow our pride in order to show us that we DO need others. Many prayers to your family and I will let my family in Boulder, Estes Park, Lakewood and Steamboat pray for you as well.
I wish I found you before you moved. I have an uncle who owns a moving company out of Boulder. The men in my family cover every branch of the US military. I will be in touch.
@@kellyanneshereck1421 thank you.
@@kellyanneshereck1421 we got moved in about a week ago so now it’s mostly a lot of unpacking. Thanks
Hope everything has worked out for you guys. If it hasn't continue to hang in there it will happen.
☑ NOW, you can take drywall Classes and learn faster, and better, at: www.drywallacademy.com
If you are confused about which drywall tools and materials you need, pick up my Drywall
Tools and Materials book on Amazon at: amzn.to/3T4eEZg
⭐ MY DRYWALL TRAINING BOOKS FOR SALE ⭐
🟢 Learn tips & tricks for spraying Knock Down Texture- geni.us/knockdownebook
🟢 Guide to Drywall Sandpaper, what to use, when etc- geni.us/SandingGritGuide
🟢 And you'll find even MORE ebooks and guides in my store.
☑ WEBSITE INFO -You can find a lot of bonus information on our website at: www.thatkiltedguy.com
🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒
- - - - - - (we earn 3-5% on these sales, but these are tools I reccommend thank you) - - - - - -
☑ TapeBuddy Tools
🟢 Mixit Paddle, works with Cordless Drills - US Link- amzn.to/3RgCMGL
🌏 International - geni.us/MixitPaddle
🟢 TapeBuddy simple taping tool - amzn.to/3KN9tVY
🌏 International link geni.us/TapeBuddyTaper
☑ LEVEL5 Drywall TOOLS (Financing Available)
Click the Links below to see the current sale prices
🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBoxCombo
🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6
🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH
🟢 A good all around Mud pan and knife set- geni.us/ize6U
🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx
🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj
🟢 For a Hawk & Trowel Set- geni.us/urlJsH
☑ Miscellaneous Drywall Tools
🟢 Radius drywall Sander, great for all- US Link- amzn.to/3sTRQ3S
🌏 International link geni.us/Radiussander
🟢 Affordable Texture sprayer hopper that I USE - amzn.to/47PWcYn
🌏 International link- geni.us/Hopper
🟢 The BEST Knockdown Knife - US Link amzn.to/3sWxKWs
🌏 International geni.us/KDKnife
🟢 Vevor Vacuum Drywall Sander - s.vevor.com/bfQtGq
🟢 Heavy Duty Mud Mixing drill) US Link- amzn.to/3sQcVMy
🌏 geni.us/MakitaDrill
🟢 For our full drywall tools store- www.amazon.com/shop/thatkiltedguydiyhomeimprovement
☑ Miscellaneous Tools
🟢 Walabot DIGITAL VIDEO Stud Finder - US Link amzn.to/3SYSWFR
🌏 International - geni.us/WalabotDIY2
🟢 The BEST SIMPLE Stud Finder I've Ever used- US Link amzn.to/3GdWDQJ
🌏 International - geni.us/FranklinStudFinder
🟢 A nice hard case for the stud finder - US link amzn.to/3GdWDQJ
🌏 International - geni.us/FranklinCase
🟢 The best paint extension pole 2-4' US Link- geni.us/extensionpole
🌏 International Link geni.us/extensionpole
🟢 A quiet compressor for the texture hopper- geni.us/mycompressor
☑ Miscellaneous supplies
🟢 Guardz torn paper sealer. Stops Torn Brown Paper from bubbling - geni.us/Gardz
🟢 Drywall Mesh tape - geni.us/Meshtap
⭐⭐ ⭐ Please Visit my sponsors below, they help me afford to put out these videos ⭐⭐⭐
☑ DO YOU VALUE YOUR INTERNET PRIVACY? I do. You can surf anonomously with Surfshark- geni.us/getsurfshark
☑ Need Solar Panels & Gear? Save up to 90% - geni.us/Santansale1 (I bought a whole pallet from them and love them)
☑ Keep Your Family and belongings safe with Simplisafe. We installed it last year and love it. Here's a link that will get you up to 60% OFF - share.simplisafe.com/x/qobGJE
I loved the way you explained the procedure. It was very well done. Thank you.
Glad you enjoyed it!
I have scraped a number of popcorn ceiling. I agree it's very messy, but all I ever did was use warm water and a deck spayer then wet a 4-6 area and used my drywall scraper to remove. Very little prep after that. When cutting into ceiling and wall, go length ways, not into the edge of ceiling tape or you hit the tape then your reaping the ceiling.
Very well done video. Alot of good information I thank you sir. I plan on checking out your other presentations. The green acre brought a smile to my face. I was USAF 1977 to 1981 and my spine has also bessed me with neuropathy. Well going to watch more of your vids. Thks again.
Thank you Jerry. You got out of the Air Force just before I joined up. And I don’t know if I mentioned it, but I also have neuropathy and it’s just lovely isn’t it? I went for a walk in the snow barefoot this morning at 5:30 AM to numb my feet so I could go back to sleep. Be sure you subscribe and click that bell icon and you’ll get notified each time I put out a video. And thanks so much for your service, and for your support of my videos. Guy
Great info. I’ve tried lightly spraying with water with little effect. Knowing it may need multiple spraying to loosen up is great. Thanks much.
*NOTE FROM GUY* : You can find all the tools in our videos at our Amazon Influencer store. We also have special lists for drywall hanging tools, Drywall finishing tools, Advanced drywall tools, general tools and supplies, gift ideas and more. You can find it all at- bit.ly/GuysAmazonStore - *ALSO*- to see all our links and other information in the description, click on the words ' *SHOW MORE* ' which is just a few lines below my channel name with my picture beside it. This seems to confuse a lot of you so I wanted to make it easier. Thanks for all your support.
I was in my daughters newly purchased condo(circa 1988) and was going to add drywall to existing popcorn ceiling however I found out the original ceiling was not fastened to studs but rather a grid system which in turn was attached to trusses. I decided that adding the extra weight to the original ceiling would not be a good idea. I eventually scrapped the ceiling and after watching your video, I discovered that I was not putting enough water on it.
I ended up doing more sanding because of it and skim coated the entire ceiling and re-sanded. The ceiling came out nice but a lot of work for one room. Four more rooms to go! Hopefully the remainder will go more smoothly (pun intended).
Thanks for your video.
Hi, it sounds like that ceiling probably had RC channel which is a sound deadening technique. It’s probably a good idea that you didn’t put the extra layer on there. I’m glad you were able to scrape it and yes a lot of people don’t put enough water on and that makes it much harder.
Usually, actually about 99% of the time, I don’t have any need for skim coating an entire ceiling. I just re-coat the joints that existed and smooth out any gouges & defects.
Anyway, I’m glad you got something out of the video. Thanks for the comment. I’ll catch you on the next one, Guy Purcella
Some paint stores get their paint shipped to them in a shallow cardboard caddy. It holds (4) 1 gallon cans of paint. I use this caddy to catch the acoustic as I scrape it off the ceiling. It works fantastically well and eliminates 90% of the mess. At first look, you might think it won't hold enough scrapings to be useful, but it is. As it fills up, I dump it out into a medium size uhaul moving box. When I'm finished scraping, I just dump the larger box out into the dumpster. I highly recommend trying this method.
Thank you for this tip.
We used an old cookie sheet..held in one hand, scraper in the other..worked great.
Best video on this procedure, and what problems I could encounter, kilt or no. 😊
Great help. All the hints on what to avoid were great. Thanks.
Thanks, glad I could help.
I used the hose from my yard with a two way adjustable sprayer I adjusted the water pressure and the spray pattern I wanted outside in the yard. When I was happy with the pressure and the spray I turned off the water from the nozzle adjustment . I put the hose through the window or door of the room I was working on, I put plastic down on the carpet or floor I only had to work the on-and-off on the sprayer nozzle. Spray the ceiling while it was soaking in and softening up I took some towels and wipe down the walls. By then the ceiling was ready to be scraped it went quick and easy. I was done. The biggest problem I had was the stuff from the ceiling sticking to the bottom of my shoes, I used a scraping to scrape off the bottom of my shoes a lot. When I was done, I rolled up the plastic put it all in the trash can. It took about an hour maybe a little more. Then got ready to tape and texture and paint.
I have removed much acoustic over the years. Your video is really thorough for those looking for advice. Grocery bags over the shoes is helpful. I like using the scraper with a bag mounted on it, like the unit Homax sells. It takes a little longer to scrape but a lot less of a clean up later, although I do like the idea of getting her scraped in one go.
Thanks for sharing your experiences with it. As a pro, I'm all about speed and quality, but I can see that working for others. 😎👣
@@ThatKiltedGuyDIY I'm a remodeling contractor and we are foolish to think we can't keep learning from others in one way or another. Keep up the good work and God bless!
Thank you sir, I feel a lot more prepared in taking my popcorn ceilings down after watching your videos.
I’m glad to help and equally glad to have you as a subscriber and member of my community. Guy
I seriously LOVE your channel! You really help me lol. Thank you!!!
You are so welcome!
Thank you so much. I just bought a condo and wanted to remove the popcorn. This looks like something I can do.
I have a whole playlist about popcorn ceiling removal. There may be other videos in that which might be of help, but yes, if you take all the steps and #DoItRight, you can.
In Britain we call it artex which I think was a brand name that stuck. Was so much easier than skimming to level five which everyone wants nowadays on all walls and ceilings. A real pain but we have a lot of great plasterers over here that can skim to a polished finish in a couple hours with no sanding etc
Excellent video. This is the first on painted popcorn removal with demonstration I have seen. Im a painter on the side an I just dont like removing popcorn. Its to messy and painted is hard to get off. But I did not use a few sprays of water to really soften. Thanks for the info.
Glad I could help. Yeah, sometimes I coat it with 5 coats of water, spread out over an hour or more.
very nice .very clear explanation. I love it and i ll use it. thank you for sharing with us , the new generation.
You're very welcome!
I NEED YOUR INPUT. What subjects would you like to see me cover on my channel? Be specific if you can like, 'Fixing a dent in a wall' or 'how to choose a drywall joint compound' etc. Comment below and I'll see it. Thanks! 😎👣
Thank you for the thorough explanation. I have been telling my hubby to remove the awful popcorn texture and got tired of waiting. I removed the texture in one room. It was very easy with your explanation and only had 2 little areas were i peeled a bit of the tape the paper. Now to repair the drywal and paint. I want a clean finish ceiling. Unfortunately can only do a room bc ceilings are super high in other areas of the house.
Have you ever had the tape pull paint off the walls? If so how did you fix that?
I'd like to hear about your pricing structure and share mine with you to compare perspectives.
MD, thank you for your comment. If you are going to try and leave it smooth, the playlist below will help as you'll want to skim coat it AFTER you do all the repairs you can. Hope this helps. Guy
ua-cam.com/video/F5W9YlRRHno/v-deo.html
JAH, it actually happens a lot. I always use the green frogtape now as it's less likely to damage the wall, but if it happens, I just touch it up with paint, or repair the missing mud if that happens, and then paint it.
I sprayed thousands of gallons of acoustic in my day also ,started with hopper then trailer rigs to a skid mount truck rig would spray 3-4 houses a day. Hello from CO-Springs
Hello from Grand Jct. I actually didn't do as much of the spraying back then as my dad preferred to do it, but we did it a bunch of different ways. In 1974 he moved us here from Eagle CO. While in Eagle he did a lot of work for George Shaw, of Shaw construction and ran a crew of about 50 guys doing a LOT of the condos and such in Vail and other ski areas. (His name was George Purcella). At one point I think at least 3 of my dads brothers worked with him up there and they even had a family band playing country music. It was while in Eagle that I first did drywall at age 8, walking on stilts, spotting nails, lol.
He got tired of the big crews and moved us to GJ and opened up the 1st Big O tire store in town. He sold that after a few years and went back into drywall.
So we started out spraying by mixing acoustic in 55 gallon drums in the back of a Datsun Pickup and dumping it into a pro style sprayer but it was one your could pull by hand, with an auger and heavy hose. Then he got a Trailer rig again with the dual tanks. My first time spraying was a hopper when the big rig was broke down and we had to spray an entire big house with a hopper, so he made me take turns, lol. Not a fun way to learn as my arm killed me, but it's funny now. We were down to just my dad, me, my uncle and my cousin Earl who was 6 months younger than me. Good memories. Thanks the reply. Guy
There is really no other easier/time saving way. Other than just do this.
Been a maintenance tech for 10yrs and a independent contractor on the side. And buddy i can tell you have done plenty n many of these wonderful ceilings. Thanks for the ole timer tips, wish I could Git R Done ina kilt!
Thanks for your comment and glad you can relate.
what a professional technician.
what a professional video.
thank you soooooo much for this !!!!!!!!!!!!!!!!!!!
You're welcome!
Excellent video , my son is a plastering contractor, and he just plastered my ceilings over the popcorn and it came out beautiful, the plaster was white and i did not have to paint. He has never had to scrape a ceiling and he has done many, many homes. He said it is now a new method and hardly no one scrapes anymore.
Thanks for sharing
Yeah, but a homeowner like me can scrape and sand. Your son knows how to plaster - and that definitely takes skill.
It’s not exactly the best method either because most of the time the popcorn will break off into pieces and get into your drywall making more of a mess.
I like the hose clamps on the extention pole. That had never occurred to me before. I use tape to fasten my knifes to extention poles. With smaller blades sometimes I take the based out of the handle and epoxy thread inserts insede them so they thread directly on the pole.
Kyle, I've taped knives to poles hundreds of times, so that's how I used to do it to. I sprayed the popcorn with my dad in the 70s and we sometimes needed to reach way high to scrape it off the walls after spraying, or to reach high to knocdown the texture and masking tape did it. But once I started removing it I wanted efficienct and fast and the hose clamps did that, plus they hold tighter. Never thought about epoxy but that sound interesting too. Thanks 😎👣
Good video. Got this job a head in my bathroom that needs attention badly. This answered the questions I had concerning the removal. Will look for more of your videos concerning the rest of my renovations.
Thanks and let me know if I can help you find certain videos or answer questions.
@@ThatKiltedGuyDIY Thanks might just do that. Inherited this house recently, and the on going repairs are numerous. Actually working under the house with plumbing and foundation concerns now, but the video I committed on is in the future as the others get done!!
This helped me understand the process. I was let down by a contractor in N Ga. Who took my money, but didn't really start, or finish but left a huge mess on every surface. including all the wood work and doors inside and out. It took a week for me to clean up. Ugh! I’m going to small claim court in order to recoup some of the loss.
Sorry to hear that
Your video gives me the confidence to tackle the popcorn texture in the old home we just bought! It's in every room except for the kitchen and attic. I'm gonna be BUSY lol
You can do it! I'll be releasing a Brand New version of this in a few days, that I just shot a few months ago. It'll have better video, more information, etc, so be watching for it.
QUESTION: #1- Why do YOU hate popcorn ceilings?
#2- Will you be trying this yourself?
I don't hate popcorn ceilings, but my wife does. I am now learning from you so I can remove 874 square feet and replace it. I am confident I can do everything except for the 20 foot vaulted ceiling. That I will call in a pro for. Thanks for the training!!!
jon clarkson glad I could help
3:19 answers your question.
Patty Wheat thanks, and you’re wincing
TRAINING COURSES COMING SOON- I now have a webpage and an email sign-up form for people who are interested in registering to get information about my upcoming training courses. Once I get the course completed, I will offer a discount code for everyone on the list. This is the best way to pre-register for the courses as that's how I'll notify everyone.
www.thatkiltedguy.com/training-courses
YOU CAN NOW FIND ALL THE TOOLS IN OUR VIDEOS at our Amazon Influencer store below. I put this store together to help you choose Quality Tools and to simplify your choices. We have drywall hanging tools, Finishing Tools, General tools, Shop Vacs, Cordless tools, Panel lifts and supplies, gift ideas and more.
You can find it all at- bit.ly/GuysAmazonStore THANK YOU for using our link.
My home was built in 1962 I have molding on the ceiling was made by hand and in the middle I have popcorn texture, and there is a very long crack from left to right . I was told it may has asbestos, any solution for my problem please any idea for what i can do ?thank you
@@abn5200 I just shot a video today on the dangers of popcorn ceiling, and another I'll release later on Should you remove it, and one more on 5 ways to get rid of it even if you have asbestos, without paying the super expensive asbestos abatement price, and still do it safely. Be watching and make sure you clicked the bell icon.
Excellent video. Lots of included details (obviously obtained from years of experience). Thank you!
Thanks and you’re welcome
Love the information and the Green Acres reference!
Thanks, only us older folks will get that reference. My grandkids probably wouldn't.
I got lucky when we did our house. My husband did the upstairs (main floor) and I got the downstairs which at the time was only one huge room and a bathroom. We later turned it into a den with 4th bedroom BUT anyways, it's was over concrete. I just brought the garden hose in, misted the ceiling, and walked back and forth knocking it right off. It was kind of fun even tho not super fun for my aching rotator cuffs lol.
Nice video! Very informative! Also looks like Bruce Willis explains how to remove popcorn texture :)
Excellent and informative video. The kilt and dance music are perfect!
Did most of my house about 15 years ago wish I would have sanded like you showed. I did most of the house wet but did one of the bedrooms dry and I must say if you can scrape it dry you do much less damage. The finish of the dry scrape needed very little Finnish work. I only did my house so there mite be big differences from houses but I would try to start dry but there is some dust when dry not as much as you mite think tho. Any way thanks for the video I was glad to see I did it correctly.
Thanks for sharing!
You really got to "the good stuff" around 14 minute mark. I appreciate the warning about the sheet rock taping at the edges of the room. Thanks so much!
Glad it was helpful!
Great info. Subbed and going to go through your video library. Never too old to learn something new.
Thank you!
I put frabric softener in a water bottle. Spray it and let it soak in and scrape away. Easy as hell!!! Great on wallpapers as well. Some reason the softener makes it 👌 to remove both. Hope it helps people reading...and it smells great!!!!
This is Joe the wood mover.. your an awesome guy with great skills... I love them...
Thanks! I truly appreciate that, and your help today.
I did this to pay my way through college in early 80's. My family and friends still ask me to help them with their ceilings.
How did you do it? Did you like it? Probably a good way to put yourself through college. Me, I went to college for one year and paid my way through by working for my dad, doing all drywall, lol. 😎👣
@@ThatKiltedGuyDIY The first two years were re-sprays and after that we started to remove the popcorn just like the way you describe it in the video. My boss always test it for asbestos and would not touch it if came back positive. I like the work a lot but I wasn't the boss making $.
This video was very informative. Thank you!
awsome video! thanks for sharing all your knowledge!
Homeowners that do not have the expensive dust free sander can use a damp rag. Rub it rather than sand it. Leaves a perfect finish and no dust.
Yeah a wet grout sponge works great
Yes, it’s referred to as wet sanding. Works wonders if you have time to let it dry before the next step
Yes but if you use too much water, and run too hard you can damage the paper on the dry wall.
Good video. I'm a bit simpler,a backpack sprayer and 12" knife all I've ever used for years!
That does work. I used a back pack sprayer for a short while but this do sprayer I use would blow your mind as to how fast it is, and no cumbersome backpack to deal with. Plus I have to refill less often. But it does work. Thanks for sharing
Really like the advice on skim coating it until smooth ,very smart
Best video I've seen on popcorn ceiling removal.
Thanks, I appreciate that 😎, & Thanks for subscribing!
Great video, thanks for posting!
Glad you enjoyed it. Are you removing popcorn soon?
Looking at houses on the market and almost every one of them has some form or another. I don't hate it but I grew up looking at it my whole life in about every house I've lived in, so if we buy and it's there it's likely coming down lol You make it look easy! I'm sure we'll have our share of boo-boo's but watching your videos are sure to be a big help! Thanks again!
Thanks, glad I could help. If you do tackle this and have any questions, feel free to ask.
I started my masterbath, and ended up having someone finish for me. I did it with a ladder and wish i thought of a long extension pole. It was very satisfying!!
It is very rewarding to see your house change so much and get that ugly stuff off. An extension pole makes it a lot easier for sure. Thanks for the comment. Hope to see you on the next one. Guy
I am glad your extension pole was satisfying while you worked on your masterbathing .
@@caroledevlin5185 hehe
Thanks for sharing the benefit of your experience, once again
Great video very informative. Keep up the great work