I feel like after Aaron started putting up these sweet skate everything videos he really took off, he was just at, 700k subs a few months ago now he's at a million!
Actually skateboarding was invented in Hill Valley in 1955 by a kid who took the handle off of a little girls wooden scooter. He made these other kids crash into a manure truck and no one had seen anything like it. Crazy story.
@17:33 Aaron catches the falling skater, and the skater is like, "My bad" and they both bump fists. The skating community is so friendly and chill. More reasons that make me want to learn how to skate.
I'm an old man in skating years, haven't ridden in like 19 years and couldn't do much more than ollie when I did but that sight made me feel like I could head down to the local skatepark and look like an inept fool all day and get back into skating and feel totally comfortable with it.
For everyone complaining about them only using 2 hardware... clearly you haven't met enough budget DIY car mechanics lol. I know people who's cars are like held together with zipties and missing bolts.
My sister bought a car like that for 2k It looked great and worked most of the time she managed to resell it for 5k This comment was completely made up i dont even know what i was talking about
I bet to all the kids in the town these guys are the coolest guys and everyone knows them, but to all the adults theyre those weird 30 years old whose best friends are all 15
Man these guys film and joke around with their camera out and have a blast, and nobody bothers them. its really dope to see everyone in the park just enjoying themselves not looking for a problem. In Miami i haven't seen much park likes this.Its hopeful to see older guys engage with the youth community. You guys are awesome, keep it up!
The drill has different torque settings. You should set it to the max, since you are only using it to drill, not to put in screws. That way it'll keep spinning, but stop when you hold it with your hand. Then you can hold it to tighten the thing around the drill bit better.
a set of risers would do the same thing as washers maybe even better, also you could use Truck Bed Liner in a spray paint can to make grip tape for the surfboard top and other big projects.
The clutch setting on the drill, set it where there is no popping when you tighten the bit, it spins loose sometimes cause it isn't getting tight enough.
+Braille Skateboarding the kicks are super high so the pop would be truly odd. and not to mention the grip is severely odd. definitely use the extreme grip. but it would be very close to a normal deck so it would be an episode where arron can really dig into his bag of tricks. I wanna see a solid tre double on that thing.
I really enjoyed this video but i think it would be cool to just see a video of you skating at this skatepark just kind of skating everything and showing off some of your best tricks. its something you're sort of straying away from not saying i dont like this new stuff i just think it would be cool to see.
Totally agree, I know Aaron is good but he never really shows it in his videos . Which isn't a bad thing cause I now this channel is about teaching skateboarding and just having fun but it would still be cool to see
+Jasper van Loo yeah a friend of mine did the same. First surf on his new board as well XP. Famous last words- don't need to screw them in, they'll never pop out.
When you are tightening the bit, turn the knob (around the shaft) with the numbers on it to the "DRILL" setting. Its the one that looks like a drill bit without a number. That is the proper setting to use while drilling a hole (or tightening a bit). The numbers are so that you don't over-tighten when driving a screw into place. You guys are awesome, and I love watching your vidoes. :)
+David De La Cruz well I just figured because if bullets at high velocity can't penetrate the glass, how can drill bits? and I'm sure they fix the glass in place with a frame then place the frame in the opening.
+Paula Phan that moment when you're the only one commenting on your own comment and then some guy comes along and comments about you commenting on your own comment.
actually in the first part when they asked where the beach was at to the dude he said venice or longbeach which is in florida so they have to be in florida
@Crispy Potatoes Ah no! There's a place called Venice and Long Beach in California as well. Plus most of his other videos are at this skatepark and in almost every video he said Fremont Skatepark.
In this video they're at the Lake Street Community Center which is at 227 N Lake St in Los Angeles. That address is for the community center there but the skatepark is right next to it. The community center is the big building behind Aaron as he is assembling the board in this vid. You can see a review of the skatepark at www.yelp.com/biz/lake-street-park-los-angeles
Hey guys! You should use a backplate on things like this to distribute the pressure of the trucks, like a thin piece of steel or aluminum. Something like the plate on the back of the guitar you screwed the trucks to but bigger.
for your drilling problem: turn the ring with the numbers on the highest number or even more so you increase the newtonmeter. or you could tighten it without pulling the trigger.
Hey guys, turn that silver dial with the numbers on it up before tightening your drill bit in the drill. It should stop your bit spinning in the drill and reduce "that noise".
Make sure you're not drilling in reverse and put the ring behind the chuck on the highest number for max torque and make sure to put it on the highest speed when drilling and lower for screwing.
its harder for him to use a drill than kickflip a surfboard.
Lol
lol
+jessica Dailey (baekillem190) LOL
haha so true
Ikr
I feel like after Aaron started putting up these sweet skate everything videos he really took off, he was just at, 700k subs a few months ago now he's at a million!
You were 10 with the same yt channel 😂
aaron please try to take the wheels off of a ripstick and put trucks on it
Yes!!!
Yes
Yes!!!
yes
Great idea!
make a skateboard with bike wheels
+Evi1M4chine Thats called the "Descender" by rockboard
The "Dirtsurfer" is along those lines
999,999,999 views
surfboard with bike wheels)
Noah Brooks brooks is that u this is pedro
Skate a ceiling fan blade.
That would be sick!
Dude... That would be so rad
+Coast Kazii That shit would snap immediately.
+Coast Kazii dude swear i was just thinking that
Good idea!
imagine slipping off that and it rocketing towards someone.
I'd pay to sea that.
LOL
+Deadly SP lmao
Imagine the pointy end slipping into your nads.
I sea what you did there
Hello and welcome to braille skateboarding where 2 clueless skaters attempt to drill fins off of a surfboard lol
aaron kyro is a pro rider for revive dipshit
I think he was saying that they were clueless about surfing, thats why they tried to drill fins of a surfboard..
+torture they're clueless surfers though not clueless skaters
but did it work though?
Hey that is not nice
Skateboards were invented my surfers who needed something to do when there weren't waves.
No. By snowboarders who needed something to do when there wasn't any snow.
But snowboarding didn't really exist in the 80s
Snowboarding's been around since the mid 60's :p Well, by that I mean it got developed in the mid 60's.
Actually skateboarding was invented in Hill Valley in 1955 by a kid who took the handle off of a little girls wooden scooter. He made these other kids crash into a manure truck and no one had seen anything like it. Crazy story.
+iWannaRideYoPony Back to the cuter reference
@17:33 Aaron catches the falling skater, and the skater is like, "My bad" and they both bump fists. The skating community is so friendly and chill. More reasons that make me want to learn how to skate.
If you ever dropped in on someone like that in while surfing there is a good chance you are going to be yelled at or punched.
I'm an old man in skating years, haven't ridden in like 19 years and couldn't do much more than ollie when I did but that sight made me feel like I could head down to the local skatepark and look like an inept fool all day and get back into skating and feel totally comfortable with it.
skate a stop sign
For everyone complaining about them only using 2 hardware... clearly you haven't met enough budget DIY car mechanics lol. I know people who's cars are like held together with zipties and missing bolts.
My sister bought a car like that for 2k
It looked great and worked most of the time she managed to resell it for 5k
This comment was completely made up i dont even know what i was talking about
Taking the fins off hurt to watch.
physically, and spiritually
as a surfer this entire video hurts but it is still entertaining
skate an ironing board
Jonathan Mitchell hahaha thats awesome
reminds me of that surf guy from tony hawk pro skater 3 back then lol
Yeah! Haha
+Braille Skateboarding skate a boogie board
+Fabio East Kelly Slater dude!
+Tommy Hurley haha lol
Rfkf
I bet to all the kids in the town these guys are the coolest guys and everyone knows them, but to all the adults theyre those weird 30 years old whose best friends are all 15
yeah, im from the future and everytime they go to there local skatepark, so many kids be tailgaiting them
@@ripmaki9955 i'm from the future too
@@brobismmmmmmm3864 im the real time traveler
@Joshua Smith no i am
@@pnkppa there is only one traveler: me
Man these guys film and joke around with their camera out and have a blast, and nobody bothers them. its really dope to see everyone in the park just enjoying themselves not looking for a problem. In Miami i haven't seen much park likes this.Its hopeful to see older guys engage with the youth community. You guys are awesome, keep it up!
You should surf a skateboard
Richard Dortch that's ain't gonna work and would just soak up all the water and snap
That is a good idea
I tried this a few years ago. It didnt work. Only underwater stuff
@DarkBoyAssassin he's a surfer tho he knows
Surf on a penny longboard
Replace grip tape with carpet and skate
+Lynx hahah nice
+Francisco Lopez thanks
Already been done
YES
에!
Mate, I swear Aaron had his drill spinning in reverse for half this video
exactly what i was thinking
I thought the same
+Sketchy Luke what do u mean by that?
Dylan Reddekopp That it was turning the wrong way
+Sketchy Luke Yeah pretty sure he had it in reverse.
its ironic because skateboarding is invented by surfers who wanted to "street surf" when it wasn't surf weather
the new model of longboard
Google hamboards
actually first. longboards were invented from surfboards
And second?
+TheEpicureanGamer bruh😂
Yeah
Game of skate while wearing heelys!
I don't think a lot of people understood that
+jack diba Do you mean wearing heely's on the board or just wearing heely's and playing skate, or, heely, if you will lol
And With heelie weeks on the trucks and the
+jack diba that would not end well
I heard somewhere that skateboarding actually began after surfers attached wheels to their surfboards, and they called it sidewalk surfing.
+spongebobfan190 it was roller skate wheels on planks of wood.
It was so they could practice
which is now pintail longboarding
Watch the movie lords of dogtown it's basically surfers that have to go to skating defiantly a good watch
+Leilani Reid Ikr
Try a snowboard?
Skate a stakeboard with longboard trucks and wheels!
+Gavin Wilhite Yeah we will def do that!
+Razor Tail skate company I didn't think it was too bad an idea...
Sorry
It just seemed like a normal thing to do
My friend put longboard trucks on a mini cruiser once it was amazing
I think it would be awesome to see a game of skate with not 2 trucks, but 4 trucks on the deck
I agree
They already recorded it, just gotta wait for them to upload and make it public
+xSLLR John Hills channel has the 4 truck skateboard.
its like unlocking kelly slater on thps3
+asabrailz Lol, nice.
read my fuckin mind
i love watching these videos because you guys always figure out how to get tricks out of it.
The drill has different torque settings. You should set it to the max, since you are only using it to drill, not to put in screws. That way it'll keep spinning, but stop when you hold it with your hand. Then you can hold it to tighten the thing around the drill bit better.
You should skate with a pair of wooden clogs!
yes, that'd be awesome
the drought on cali has been hard on the surfers lol
Lol the drought doesn't affect the ocean... In ten yrs it only brings the ocean down like 1 cm
+happyotter888 +Noah Chin Learn to take a joke guys, you must be fun at parties ;)
😂
+happyotter888 dude it was a joke
+Mynor Marroquin hahahaha exactly
This shit makes me want to get back into skating. Not just the boarding but just hanging out at the skate park all day, goofing around. Good times.
skate a deck with trucks rotated 90 degrees so they would be moving like this hoverboard!
ps, love your channel
i wont work it will just fall
they should try
skate trucks rotated 90 degrees!
you should stack 6 boards on top of each other, a bit like the griptape challenge but with boards instead. have fun finding 10" bolts tho ahaha
+Meco rodriguez mager crew did
+FiggitDaddy *majer
They did but with three
+Zach Yeager i know i totally called it lmao
a set of risers would do the same thing as washers maybe even better, also you could use Truck Bed Liner in a spray paint can to make grip tape for the surfboard top and other big projects.
The clutch setting on the drill, set it where there is no popping when you tighten the bit, it spins loose sometimes cause it isn't getting tight enough.
the title should've been aaron going from 7.75 to 8.0 board
lol
he actually has a new 8.0 setup lol
awesome vid try skateboarding a wake board !!
+SPNCR777 thanks we'll check that out!
+SPNCR777 A wakeboard should be even easier
+Braille Skateboarding and add some grip tape to it
+Braille Skateboarding why don't u ever reply to me
+Braille Skateboarding put wheels and trucks on a snowskate board!
Hand cuff game of S K A T E
+Kaylee White ahahahaha
this was great to read
+Parkour Ninja Thirsty ass nigga
+Charlene Martin lmao what if they couldn't catch their balance and fell. That would be hilarious
+Charlene Martin this isn't MAJER Crew
+Charlene Martin this girl is cute!
This is the most fun I've seen Aaron have
your reverse drill idea would work if you had a reverse cut drill bit. used em lots to extract broken studs on engines
Skate an Ambition snow skate
Yes
best suggestion yet.
+Laira Crowley I'll check that out!
Hey Aaron
+Braille Skateboarding the kicks are super high so the pop would be truly odd. and not to mention the grip is severely odd. definitely use the extreme grip. but it would be very close to a normal deck so it would be an episode where arron can really dig into his bag of tricks. I wanna see a solid tre double on that thing.
16:00 your welcome
you're*
@GV3 reaper you the man
sorajung13 thankyou
you're* +sorajung13
YOU ARE AN IMPOSTER!Gaming Wolf GET ORIGINAL IDEAS!
That sound of the good pop, vibrating throughout the board - so cool 16:01
Skating on a surfboard was my idea in the snow board vid
Congrats man you got him 800,000 views
+Ricardo Estrada lol
You guys should skate a surfboard
isnt hat what theyre fucking doing
+Mr WTFish oh
+Ariel Perez nah they'd never do that because that's just idiotic.
Or surf a skateboard
Hopefully next video
Gnarly bruh
Radical
Noice bruh
+amskater catching those tubular waves like woah
tubular bruh
Tabular
Man, the way Lance pulled out the fins with the wrench tool was so satisfying.
Isn't this how skateboarding started with roller skate wheels on surfboards? ??
They used old planks of wood instead of surfboards
They usually put them on like 2 by fours or any piece of wood they could find
Nicholas Hibshman Winter is when your suposed to surf.
Alex V ??
'i'm gonna kickflip it' - aaron kyro, about something he should most definitely not kickflip
it would probably ride better with longboard trucks
Ever since I started watching these I've been looking around my house for things they could use.
I love how they never have the simple tool they need, so they end up brute forcing it.
SKATE A TOASTER
In to a bath tub full of water.
yes
you deserve more likes
I really enjoyed this video but i think it would be cool to just see a video of you skating at this skatepark just kind of skating everything and showing off some of your best tricks. its something you're sort of straying away from not saying i dont like this new stuff i just think it would be cool to see.
Totally agree, I know Aaron is good but he never really shows it in his videos . Which isn't a bad thing cause I now this channel is about teaching skateboarding and just having fun but it would still be cool to see
This is THE coolest idea ever! For sure doing this when I get another surf board
You guys should start a Braille longboarding channel
No
Fuck outta here
No
NO
Lol
Skate a scooter deck just like the bottom bit where the wheels are?
They've done it
Good old, sturdy future fin system
+Bask3tballTrickSh0ts the original fcs fin system is still the best imo
+Jasper van Loo I rock both futures and fcs II. Love feel of futures in a quad set up
Bask3tballTrickSh0ts i once dinged my friends board with my knee while popping a fin out on a fcs II box xD
+Bask3tballTrickSh0ts they're tough!
+Jasper van Loo yeah a friend of mine did the same. First surf on his new board as well XP. Famous last words- don't need to screw them in, they'll never pop out.
1:54 turn the settings on the drill to "drill" when its drilling. lower speeds are for prethreaded holes and screw/bolts.
Suggestion to change the name of this video to: "Discount Tom Green and Discount Dane Cook screw around at a skate park for a day"
HAHAHAHAHA best comment ever
Schnappyschnoo i don't get it. what?
it was meant to be a good natured joke about how they look like Tom Green and Dane Cook, but admittedly I sound like kind of a dick
I don't think you'd have to spend a lot to get the real Tom Green or Dane Cook.
TJ L fair point
Skurfboard. Make it a thing guys.
Putting the dibs on the board after breaking them off, that's like cutting off someone's toes and stapling it to their chest😂
When you are tightening the bit, turn the knob (around the shaft) with the numbers on it to the "DRILL" setting. Its the one that looks like a drill bit without a number. That is the proper setting to use while drilling a hole (or tightening a bit).
The numbers are so that you don't over-tighten when driving a screw into place.
You guys are awesome, and I love watching your vidoes. :)
Dude completely eats it straight into aaron skating a surf board…. Yet he’s apologizing lol
All love
You should skate with skis so it's like two separate ones😂😂
bullet proof glass bro trust me...youll unlock the og est board ever
how is he gonna drill through bulletproof glass?
+Enrick Jaugan is not drill proof ? lol how you think they screw them together in the banks and shiid..
+David De La Cruz well I just figured because if bullets at high velocity can't penetrate the glass, how can drill bits? and I'm sure they fix the glass in place with a frame then place the frame in the opening.
+Enrick Jaugan im not tryna be a douche lol ...but yeah they do drill the bullet proof glass.. n put the screw and nut on it
look up a jelly board
Hey solid tip. Whenever I don't have washers I just drill holes in pennies. Cheap and works great
Skating starts at 10:10
Ur welcome :)
11:10*
Lmao, that moment when u mess up ur comment so badly trying to get likes.
+Paula Phan that moment when you're the only one commenting on your own comment and then some guy comes along and comments about you commenting on your own comment.
Nun thx
Nun actually, 11:11
man you guys are nuts lol.. where y'all at?
I think it's Fremont Skatepark in California
at San Francisco
actually in the first part when they asked where the beach was at to the dude he said venice or longbeach which is in florida so they have to be in florida
@Crispy Potatoes Ah no! There's a place called Venice and Long Beach in California as well. Plus most of his other videos are at this skatepark and in almost every video he said Fremont Skatepark.
In this video they're at the Lake Street Community Center which is at 227 N Lake St in Los Angeles. That address is for the community center there but the skatepark is right next to it. The community center is the big building behind Aaron as he is assembling the board in this vid. You can see a review of the skatepark at www.yelp.com/biz/lake-street-park-los-angeles
Get some 8" pvc piping and throw on some angled couplings for tails. Put some grip tape on top and quit being lazy with hardware!!!
+Mike Smith Good idea.
I just started watching this channel, I skated all threw the 90s and all this reminds me of my favorite pro Simon Woodstock
How about a Toboggan?
That would be fun haha
+Braille Skateboarding do skis!
could you skate an xbox?
Cast a mold of a skateboard and skate a giant ice cube. Or 3D print one.
+James Stortz It could be the reverse of snowboarding; maybe you don't even need trucks.
+James Stortz You'll need to be rich for a mold.
+Mixel / Pixel really? because plaster and clay is like $20 all together
Can you guys skate a hairline next ?
Hey guys! You should use a backplate on things like this to distribute the pressure of the trucks, like a thin piece of steel or aluminum. Something like the plate on the back of the guitar you screwed the trucks to but bigger.
That drill is not a high enough voltage so it wont break the thing
nvm
How do you now what voltage his drill is?
Mason Holmes My bro was there
its not the volts, its the torque setting they're using, they need to turn the torque ring to the little picture of the drill bit
bud tacos Thx =) Thats what I thought it was!
OMG i`m so amazed that u can kick-flip that
i know this video is old but you guys shoulduse bigger truckswhen using stuff this big
+LeoVomend also dont be cheap and lazy and get all 4 bolts in
+LeoVomend This video isn't old at all.......... It was literally posted today
SBNDark i read february and thought last year
LeoVomend oh xD
+LeoVomend thanks for the feedback!
The best of both worlds! Level reached: Jedi Master :D
You should tray-flip a tray.
Skate an apple watch
How !?¿¡
+MidnightNeptune :D Tiny trucks and delicate feet
I wanted that surfboard😭😭😭😭😭😭😭😭
for your drilling problem: turn the ring with the numbers on the highest number or even more so you increase the newtonmeter. or you could tighten it without pulling the trigger.
u guys shouldn have done a skim board cuz there smaller
That's the challenge really though
Put the scooter wheels on this and you'll have a cruiser.
skate an ambition snow skate
Oh yes!
I love the sound it makes while spinning 😌 👌
Is it crazy how saying sentences backwards creates backwards sentences saying how crazy it is
Lol
mind = blown 0.0 😊🔫
What the fuck mind is blown
Lol
+Arman The Rogue what just happened to me
he looks like chicken joe from surf's up
It hurts my heart seeing a board treated like that
Hey guys, turn that silver dial with the numbers on it up before tightening your drill bit in the drill. It should stop your bit spinning in the drill and reduce "that noise".
anybody remember the Slater cheat in Tony Hawk Pro Skater 3?
SKATE A KEYBOARD!!! :D
skate a computer monitor or flatscreen
thats a total waste unless it doesn't work anymore
+RandomLion Productions he skates on iPads and MacBooks so I don't think Aaron would care
+Jason Ellison Yes I am aware of that but thats even more of a waste then skating those things
RandomLion Productions you do realize that's the point?
+RandomLion Productions no actually its really not. I'm not trying to start a fight I'm just saying 😛
You are supposed to pull from the back of the fin 😂 I love lance acting like he knew what's he was doing
RIP drillbits/drill
SKATE A FLAT SCREEN TV
I'll skate your fat nan
What's a Nan?
+Sam McAllister oh def!
+Braille Skateboarding skate a chair
The time you spent unscrewing it you could have just gone home and gotten an Allen wrench
+Mason Taylor too easy
+Braille Skateboarding hi
+Ray Machado hello
Make sure you're not drilling in reverse and put the ring behind the chuck on the highest number for max torque and make sure to put it on the highest speed when drilling and lower for screwing.