You can get them in Maderas Barber o in Madinter. You can find them both on google. Also just in case you’re interested have a look at my website www.onlineguitarmakingcourse.com
thank you Pablo . question please how do you find where the sound hole goes so you can place the rosette ? i don't see where the measurements for it yet >
Hi Walter, it depends on the guitar you are making. Also this is the type of info you should be able to find on the plans you are using. On my instruments the centre of the rosette and the sound hole is 148mm from the top edge of the template, which is also the position of the 12th fret. The sound hole is 43mm in radius and the radius of the rosette is 46mm. I hope this helps.
@@redkitekk thank you so much yes . i had to laugh at myself i pulled my plans out and looked at them but no numbers showed then it dawned on me i needed to measure from the plans lol . if you dont ask questions you will never learn again thank you .
Hi! I have a question. How do you calculate the angle needed to make a circle when you put all the pices together? And then, How do you cut the angle? Thank's!
+Nicolas Balzarotti If you watch this video it may answer your question. ua-cam.com/video/RiQOYo_svdM/v-deo.html I hope this is what you need, if not, let me know. Pablo
So great, it took a bit to find your video pero lo enconré. Thank you for sharing your knowledge.
The trick of the scraper over the 2 bits of veneer as thickness gauge is awesome ! Thanks a lot.
Genius method for thicknessing veneer strips.. So simple!
Utterly fascinating. The craft is breathtaking.
Increíble Maestro!!!!🙋🏼♂️
muchos gracias pablo!
de nada!
una pregunta como.podiar limpiar una guitarra y sacarle algo de brillo ssi.es posiblee
Could you tell where to buy the coloured veneers? I can't find any supplier in Europe. Thanks!
You can get them in Maderas Barber o in Madinter. You can find them both on google.
Also just in case you’re interested have a look at my website www.onlineguitarmakingcourse.com
@@redkitekk Found it. Thanks for your response! Btw. I really enjoy your videos. Incredibly good craftsmanship and also super informative!
Is it possible to make these tiles without a bandsaw? How could you cut the strips by hand? Is there a jig at all?
Hi, if you don't have a bandsaw you can use a table saw with a very thin blade. I wouldn't recommend doing it by hand.
qal o nome desse paple que esta usando
thank you Pablo . question please how do you find where the sound hole goes so you can place the rosette ? i don't see where the measurements for it yet >
Hi Walter, it depends on the guitar you are making. Also this is the type of info you should be able to find on the plans you are using. On my instruments the centre of the rosette and the sound hole is 148mm from the top edge of the template, which is also the position of the 12th fret. The sound hole is 43mm in radius and the radius of the rosette is 46mm.
I hope this helps.
@@redkitekk thank you so much yes . i had to laugh at myself i pulled my plans out and looked at them but no numbers showed then it dawned on me i needed to measure from the plans lol . if you dont ask questions you will never learn again thank you .
@@redkitekk thank you Pablo Requena
Hi! I have a question. How do you calculate the angle needed to make a circle when you put all the pices together? And then, How do you cut the angle?
Thank's!
+Nicolas Balzarotti If you watch this video it may answer your question.
ua-cam.com/video/RiQOYo_svdM/v-deo.html
I hope this is what you need, if not, let me know.
Pablo
+PabloRequena Yes, thats what I was looking for. Thanks
ESTO ES EN ESPAÑA??
Si, si estas interesado encontraras información en www.guitarmakingcourse.org
can you make up your mind? are you british or spanish?