Thank you so much. This was so helpful. I got these to laminate my sons charts for school. The directions on the package is not really clear but your video made everything crystal. Again thank you 🙏🏻
Thank you for the tutorial. Headlights are important, especially in Alaska. My dad was a riverboat pilot for the railroad in Nenana in the 1950's and 60's.
Correct me if I'm wrong. Aren't those sheets intended to laminate only 1 side of the document? Not that you can't do both as you've clearly demonstrated.
OMG! So easy. I couldn’t figure out why it would be single sheet. Dumb moment. Also, maybe if you are concerned about bubbles, a ruler would help with application. Thank you for the tip!
Thank you for sharing I appreciate it now I can do my own business cards at home and don't have to worry about a laminated machine saves me more time and money🙏🙌🏼😉
I worked at a daycare for 10 yrs we had the laminate machine but it took awhile to heat up so if we needed something fast we used the rolls of clear contact paper I found the easiest way to do it with no bubbles is to lay contact paper non sticky side on table then take paper image side onto contact paper then repeat for backside of picture
hey man what were you making when you came up with this video, I'm looking to make door-to-door pitch cards. Basically it's what you had somebody when they open the door and it gives them something to hold and look at when you pitch them right out of the gate. But what were you making
It's always really nice when someone figures something out and shares it with other people. Thank you.
Thank you for this, I was feeling stupid because I couldn’t understand the written directions lol
Naa you're not the only one 🍉🌻🐣🍇🍊😭
That's why I'm here too lol
Not just you! 💗 I didn’t get it either
Thank you for making a video that’s straight to the point without the unnecessary crap 🙌🏽
Thank you so much. This was so helpful. I got these to laminate my sons charts for school. The directions on the package is not really clear but your video made everything crystal. Again thank you 🙏🏻
Agree! Exactly why I’m here. 😂 I just bought a pack and I was like let me go find a video.
I agree! The instructions stink. They don’t tell us to grab two sheets!
Thank god I found I'm not the only one that needed this lol. I thought I was losing it lol
This is what UA-cam was supposed to be. Thank you brother. Best of luck with the headlight restos
I like your personality lol dry humor but helpful! Thanks!
What would I do without you! Thanks so much for this video!!
Thank you for the tutorial. Headlights are important, especially in Alaska. My dad was a riverboat pilot for the railroad in Nenana in the 1950's and 60's.
coool! i was so bummed i bought the wrong kind (the single-sided ones) instead of the double sideed but this hack is genius!
I had to UA-cam this tutorial because i just couldn't understand the directions!! Thank you kindly for sharing!!
Thanks so much for this! Do you know if trimming the excess will mess it up? My pack cost about $1 more than yours I think.
If you trim it down to the paper it absorbs moisture.
Dane Phillip Ok. Thanks!
I got the Walmart brand (pen and gear), and there were zero instructions. So thankful you posted this. 😁🙏🏻
thank you so much for saving me $10 of learning lessons! you're awesome!
Correct me if I'm wrong. Aren't those sheets intended to laminate only 1 side of the document? Not that you can't do both as you've clearly demonstrated.
Yeah it's for one side they sell special ones for both sides
@@edsontovar6675 we didn't realize that when we bought it, but it's good to know how to do it without wasting these!
Thank you. Worked like a charm. Hope your business took off and is doing well!
Definitely just used this video for my party favors for this weekend. Thank you!! You’ve done a great service to man kind.
Thank you so much for this video. So much more helpful than the directions on the packaging.
Thank you!! I wrecked so many before watching this lol
Thank you I know it seems so simple but when I read the directions it was not. Thank you for sharing.
Yours service are appreciated 🙏🏿
Thanks for this, the instructions were impossible to understand no matter how many times I read them.
I feel stupid I did it a whole different way 😂 . thank u for this
OMG! So easy. I couldn’t figure out why it would be single sheet. Dumb moment.
Also, maybe if you are concerned about bubbles, a ruler would help with application.
Thank you for the tip!
This video is so helpful- Thank you so much!!
If you are just doing a card, can you just use one sheet and fold it over?
Thank you for sharing I appreciate it now I can do my own business cards at home and don't have to worry about a laminated machine saves me more time and money🙏🙌🏼😉
Thank you, thank you. 😊 this was a great post. 👍
I think I bought the wrong thing so I can't use this with vinyl or my heat press I'm so confused I am trying to make my sublimation stickers
I was trying to figure this out earlier... my little one's made turkeys from their handprints and I was just not getting it. Thanks for the tutorial!
Thank you!! It was driving me crazy..
I worked at a daycare for 10 yrs we had the laminate machine but it took awhile to heat up so if we needed something fast we used the rolls of clear contact paper I found the easiest way to do it with no bubbles is to lay contact paper non sticky side on table then take paper image side onto contact paper then repeat for backside of picture
hey man what were you making when you came up with this video, I'm looking to make door-to-door pitch cards. Basically it's what you had somebody when they open the door and it gives them something to hold and look at when you pitch them right out of the gate. But what were you making
If there’s a hell, you’re given a box of these when you check-into your room.
I need these. I'm making reproduction boxes for my games. I've tried polyurethane but it didn't create the glossiness I had hoped.
Did you burn your left hand using a heating laminator.
Thanks 🙏 I am making my daughter a book and want to Laminate the pages
Nice job. Thanks for this
Va this be used to laminate Id and debit cards.
So you have to use two sheets per doc
No those sheets are for one side. He just decide to do both.
They do also sell a 2 sided option.
Lol I still fd up my lamination, not perfect but not that great either. Gonna practice some more carefully
Thks so much and good luck with your business
thanks! I was super stuck!
Helpful.. thanks!!!
Also note, these laminate sheets are not that thick. I would like to find thicker ones if possible.
Im in Kentucky and I paid $9.99 for same 10 sheet pack at Hobby Lobby.
I paid $6 at target (10 sheet)
Thank you, very helpful!
Thanks for sharing
Thanks Dane
DIY improvisation style
Thanks!
Thank you
thanks dane
Thank you!
thanks
landscape
😀
small version for card USELESS
Thank you
Thank you