@@UrbanOpsOffRoad I can’t get one of mine to go in all the way. I have Siberian Polly bushings. I even used a floor jack and my front bumper. Just don’t want to go lol.
Yup! It does work. Just make sure you spray pb blaster or wd40 and heat it up so it becomes a smooth process. Obviously do this only on non rust compromised lower control arms.
@@UrbanOpsOffRoad wast extreamly corroded but just enough where it didn't allow it to break freely once the initial break happened it pushed out easily but it was to late
Bro, I didn’t my videos all freaking morning. I was trying to do find your video boom boom. Boom!!!!💥 you killed it!! So simple I’m mad I didn’t think to do this
It’s simple, just take your time to soak them with pb blaster and make sure your lca it’s not compromised by rust. Once removed you’ll need a press to get the new ones in. I went for whiteline bushings 🤙🏻
Obviously you only do this on sound and rust free LCA. It is very safe if you are considering risk management and proper PPE. I USA and H frame 20 ton press to drive the Whiteline bushings in.
That’s smoke is the worst! I actually had to drill out and remove the rubber to use the sleeves as pressing tool for the Whiteline bushings. Thanks for the follow dude! Such a honor!
What: removal of old LCA bushings. How: as you can tell by applying heat and pressure using the OEM jack that comes with the Tacoma. Why: to install new Whiteline bushings that provide full range of movement of the front suspension. Cheers my dude 🤙🏻
How long did you heat up the bushings for I plan on trying this tomorrow since I need to replace my LCA bushings as well and they didn’t budge with a bushing press
About a minute or so, first give it a good coat of pb blaster and then put a little bit of pressure and then start the heating process and then crank that Jack 🤙🏻
@@UrbanOpsOffRoad Watch the lubrication comparison video by Project Farm, PB BLaster actually sucks at doing what it's supposed to do. Great video, fixing to do my 95 FJ80 Landcruiser bushings so this is helpful.
@@UrbanOpsOffRoad Shoulda written that differently, PB blaster works, but there are equivalent products that work a LOT better in a similar price range. Keep up the good work.
Sale el metal y el hule? Necesito dejar el metal para reusarlo con Powerflex bujes de polyurethano. Es posible usar ese metodo para extraer solo el hule. Tengo 5 anos de andar las partes dentro de mi camioneta y quiero perder el miedo y hacer ese trabajo durante el fin de semana largo del 4 de Julio.
Brilliant, a comment with no facts to back up the statement. lol I’m on the west coast, no rust issues around here, plenty of heat and lubrication was used. Plus it’s a slow process. Slapped some whitelines and my LCA tabs are gusseted and guess what no alignment issues. Cheers buddy 🤙🏻
Percect sound track for bushing removal lol
Big brains move I love these bottle jacks so useful.
Hell yeah multipurpose tool by Toyota for sure!
Now the hard part. Putting the new ones in
If there’s will there’s a way 🤣
@@UrbanOpsOffRoad I can’t get one of mine to go in all the way. I have Siberian Polly bushings. I even used a floor jack and my front bumper. Just don’t want to go lol.
Thats what i came for... an idea for a situation where the press wont work and you do t have the bushing tools. Very clever!
Yup! It does work. Just make sure you spray pb blaster or wd40 and heat it up so it becomes a smooth process. Obviously do this only on non rust compromised lower control arms.
Awesome job. Im going to buy a control arm assembly❤
Fkn geniu, been struggling the last couple of days to push some bushings out and didn't think of doing this omw to buy a bottle jack lol
Send it brother! Make sure you apply a bunch of heat and obviously don’t do this with extremely corroded parts.
@UrbanOpsOffRoad and sadly I bent my control arm😂😂 time to order new ones and re modify them. All cus I wanted polly ubushings
@@UrbanOpsOffRoad wast extreamly corroded but just enough where it didn't allow it to break freely once the initial break happened it pushed out easily but it was to late
@@carlossalazar2164 damn dude that sucks! Always go for Whiteline bushings my dude! I actually have an extra pair of LCA’s. Lmk.
@@UrbanOpsOffRoad what state are you located? I might be interested in buying the lca
Bro, I didn’t my videos all freaking morning. I was trying to do find your video boom boom. Boom!!!!💥 you killed it!! So simple I’m mad I didn’t think to do this
All good.
Nice work! I’ve always heard this job is a nightmare. You make it look easy. 👍🏻
It’s simple, just take your time to soak them with pb blaster and make sure your lca it’s not compromised by rust. Once removed you’ll need a press to get the new ones in. I went for whiteline bushings 🤙🏻
We have more.easy way out for it..toyota innova ..fortuenrt..
Awesome idea!!! thanks for sharing!!!
Hell yeah buddy! Just make sure to only perform this on rust free LCA’s
Can we see how you put the new ones
Regular c style press after the LCA was nice and warm. Wear gloves!
Bottle jack worked but a h frame hydraulic press works better and I would think safer.
Obviously you only do this on sound and rust free LCA. It is very safe if you are considering risk management and proper PPE. I USA and H frame 20 ton press to drive the Whiteline bushings in.
Nice clean removal!
I had to save the inner sleeves though so much more fire and thick black smoke was involved. Worst. Job. Ever.
That’s smoke is the worst! I actually had to drill out and remove the rubber to use the sleeves as pressing tool for the Whiteline bushings. Thanks for the follow dude! Such a honor!
Good idea but I wish you would have explained what, how, and why you did it this way and other tips
What: removal of old LCA bushings. How: as you can tell by applying heat and pressure using the OEM jack that comes with the Tacoma. Why: to install new Whiteline bushings that provide full range of movement of the front suspension. Cheers my dude 🤙🏻
Old bushings make the vehicle feel sloppy
Smart man!
Just another clown of the circus brother 🙌🏻
It’s quite clever mate!
Works wonders if you’re LCA are not rotten away
Nice gonna try it
Nice, works with corrosion free LCA’s
Does not the heat weaken the integrity of the bushing hole?
Nope all good. Only do this on rust free LCA’s
What is that tool called? Looking to rent one for my control arm bushing replacements
Not a tool, it’s the Toyota factory jack and a blow torch from Walmart. The penetrant it’s on blaster. To set the new bushing you will need a press.
Where can i find that attachment you have on the bottle jack?
Which attachment?
Now how to install new one back
Press, jack with the right size cups or manually depending on the style of the bushing being used.
Fcking genius
Now to the ball joint
How do you install? Thanks.
With a 20 ton H frame shop press 🤙🏻
How long did you heat up the bushings for I plan on trying this tomorrow since I need to replace my LCA bushings as well and they didn’t budge with a bushing press
About a minute or so, first give it a good coat of pb blaster and then put a little bit of pressure and then start the heating process and then crank that Jack 🤙🏻
@@UrbanOpsOffRoad Watch the lubrication comparison video by Project Farm, PB BLaster actually sucks at doing what it's supposed to do. Great video, fixing to do my 95 FJ80 Landcruiser bushings so this is helpful.
@@JacopoSkydweller send it! Pb blaster has worked wonders for me so far. Cheers!
@@UrbanOpsOffRoad Shoulda written that differently, PB blaster works, but there are equivalent products that work a LOT better in a similar price range. Keep up the good work.
How to spread and bend your lower control arm.
Not the case my dude. That would happen if you shit’s all rusty 😂
@@UrbanOpsOffRoad sorry bout that. Cat on the keyboard
So I guess it the same way you put it back in
Nope! Press time baby!
Hice justamente lo mismo
Se hizo la machaca!!!
@@UrbanOpsOffRoad ahorra tiempo
Sale el metal y el hule?
Necesito dejar el metal para reusarlo con Powerflex bujes de polyurethano. Es posible usar ese metodo para extraer solo el hule.
Tengo 5 anos de andar las partes dentro de mi camioneta y quiero perder el miedo y hacer ese trabajo durante el fin de semana largo del 4 de Julio.
What year vehicle ?
This are 2nd/3rd gen Tacoma, 4th/5th gen 4runner or FJ Cruiser LCA’s.
👑
only way to do it
Hell yeah brother 🤘🏼
Cool..
DIY all day 🤙🏻
mine shot out like a flipping gun XD
Hell yeah brother!!!! Eye always!!
Brilliant you have just wrapped this arm the car will suffer alignments issue 😮
Brilliant, a comment with no facts to back up the statement. lol I’m on the west coast, no rust issues around here, plenty of heat and lubrication was used. Plus it’s a slow process. Slapped some whitelines and my LCA tabs are gusseted and guess what no alignment issues. Cheers buddy 🤙🏻
*warped
@@herewegoagain404says who?
@@UrbanOpsOffRoad I'm not saying you warped the arm. I'm saying that guy spelled warped wrong (wrapped)
@@herewegoagain404 🤣 gotcha
I tried this today and it wouldn’t budge. Guess I’m taking them to a shop.
Damn that sucks, depending on rust conditions 30 min job can become an issue, but hey! You tried 🤙🏻
@@UrbanOpsOffRoad Had to buy new arms, they had to work 5 hours just to get one out. The rust belt is not nice to vehicles up here lol.
@@Yeeto767 yup! Rust is a mess! That sucks!
Yea i think ill just spend the extra $60 and replant the whole control arm instead
What? But yeah dude feel free to do that 🤘🏼
*Replace
Ya try that in the rust belt smh
🤣 wrong coast issues for sure. I remember looking at used Tacomas when I was in DE and I was like hellllllllll nooooooooooooo!!!! 😂
@@UrbanOpsOffRoad it worked but had to bend the control arm back inward after lmao
@@tyebolger7625 damn!!!! Be careful with rusty LCA’s. Remember to apply heat and soak them with PB Blaster prior to engage. Cheers!
Cv
Axle