@@screwsnutsandboltsHi I have error p0366 from peugeot 307 2003 1.6l petrol....the car not starting, but if clean error with obd2 ,start car, but now no more possible to clean the error, and car not starting. I replace and check the crankshaft sensor, have 490ohm resistance , same the original.....I check the wire untill to ECU, and is ok. Some sugestion, what must to check ?
You should check with some diagnostic tool what error is in memory. Recently have same abs/esp error sometimes, diag tool shows problem with rear right wheel sensor.Removed, cleaned sensor and magnetic ring on bearing, spray sensor connector with contact spray and no more esp error.
Hi , I changed the tires and now is making a noise when i break and the ABS light turn on. Are'you guess something alse happned when the guy changed the tires?
Hello there. In my Peugeot 307 Bva automatic transmission vehicle, I am getting an error in the speed information from the abs. The gear goes into malfunction mode. Is abs sensor cleaning enough? what else can I do. thanks
@@screwsnutsandbolts i must check on mine 207 is that is true on tire /wheel to see is it so or not because i have same problem with no speedometer working
i change sensor but still nothing changed on speedometer!!could it be fuse in fusebox because i see that there is fuse of 10A which are for speedometer
@@screwsnutsandbolts hmm,i ask some mechanics and they sayed it is related with speedometer sensor for models from 2006-09 and newer got under engine speedometer sensor
@@screwsnutsandbolts they cheat me then, i was thinking same as you but they see my number of chasis and say ed its not speedometer sensor under engine then this on wheels !! i will see tomoroow under car
all the way through i was screaming brake disc wear - i couldnt possibly have put the wheel back on without doing a brake service after seeing those discs!!!😱
NOT GOOD, you do not have to take the whole platic out, there is a small peace you can open, what about the left side the sensor is the same, but sits different
Just bought an 18 year old 307. Never imagined I would find such great videos for a car this old an cheap! Keep up the good work man.
Thanks, will do! :)
yes these car are good to work on at home
@@screwsnutsandboltsHi
I have error p0366 from peugeot 307 2003 1.6l petrol....the car not starting, but if clean error with obd2 ,start car, but now no more possible to clean the error, and car not starting.
I replace and check the crankshaft sensor, have 490ohm resistance , same the original.....I check the wire untill to ECU, and is ok.
Some sugestion, what must to check ?
High level of showing what to do and filming it. Congrats 😊
Thank you !
Thank you for a video that is easy to watch and follow!
You're welcome, thanks for watching !
Excellent well shown and explained 👍
Thank you !
Many thanks master, my warning abs/esp light just came up. I presume it's dirty.
It's one of the possible causes
You should check with some diagnostic tool what error is in memory. Recently have same abs/esp error sometimes, diag tool shows problem with rear right wheel sensor.Removed, cleaned sensor and magnetic ring on bearing, spray sensor connector with contact spray and no more esp error.
BUD CHAINGE them they cost £11.00 on eBay
Excellent video; really well produced. Thanks!
Thank you !
Hi , I changed the tires and now is making a noise when i break and the ABS light turn on. Are'you guess something alse happned when the guy changed the tires?
It's possible, but I'm not sure what could be causing the noise. I would take it back to the guy who changed your tires and explain the problem
Hello there. In my Peugeot 307 Bva automatic transmission vehicle, I am getting an error in the speed information from the abs. The gear goes into malfunction mode. Is abs sensor cleaning enough? what else can I do. thanks
Exactly what I was looking for :)
is it on same place speed sensor on Peugeot 207 too?
I'm not sure, sorry
@@screwsnutsandbolts i ask some mechanics and seems that older 207 2006 -09 have on the wheels sensor while redesign 09-12 have under engine
Thanks for the info
@@screwsnutsandbolts i must check on mine 207 is that is true on tire /wheel to see is it so or not because i have same problem with no speedometer working
Great Vid thanks a lot...hope was so easy to do the same in my C5
No problem 👍
just one thing my friend are the rear abs sensor s the same , but one bolt s upper part of sensor and other bottom part of sensor
The front and rear sensors are not identical but they are replaced in a similar way
@@screwsnutsandbolts thank you bud
i change sensor but still nothing changed on speedometer!!could it be fuse in fusebox because i see that there is fuse of 10A which are for speedometer
This is not a speedometer sensor. This is a wheel speed sensor for the ABS braking system
@@screwsnutsandbolts hmm,i ask some mechanics and they sayed it is related with speedometer sensor for models from 2006-09 and newer got under engine speedometer sensor
@@screwsnutsandbolts they cheat me then, i was thinking same as you but they see my number of chasis and say ed its not speedometer sensor under engine then this on wheels !! i will see tomoroow under car
Good luck !
@@screwsnutsandbolts i will need it,i see thst fuse can be problem too and tgere is fuse for speedometer too
Is the half-shaft ring on the bearing located? Is it available as a replacement part?
This video might help you: ua-cam.com/video/TtNtDefWLMw/v-deo.html
Good job, thanks 👍👍
No problem 👍
all the way through i was screaming brake disc wear - i couldnt possibly have put the wheel back on without doing a brake service after seeing those discs!!!😱
The video was only focused on the the sensor and the steps needed to replace it.
You should see mine. As long as the mot guy doesn’t flag it then they are good. Manual states min thickness.
No need whatsoever to remove the liner. Access the plug is factored in to its design.
so plug are hidden behind plastic arch
Yes they are
@@screwsnutsandbolts i hope it is same for 207
Good video
Thanks
You may use air flow sensor cleaner.
How many ABS sensors are the car in total?
I think there's two at the front and two at the rear
Ima li neko. Iskustva sa Pežo 206 HDI 2000 kub 2001 godište sa kilometar satom neradi jedno kilometar pa proradi sta li je riknulo❓
Jesil riješio brt
NOT GOOD, you do not have to take the whole platic out, there is a small peace you can open, what about the left side the sensor is the same, but sits different
Only dam issue here is thd Gap I find
Gap sensor is set 2mm... perfect as soon as you take it off .. abs light triggers have to get dam 2mm right ✅