Turnigy AeroStar Flight Control System 3 Axis Aircraft Gyro
Вставка
- Опубліковано 11 вер 2017
- Installing a Turnigy AeroStar 3 Axis aircraft stabilisation system to a flying wing with Elevons.
I had a ball trying to figure this out so you can relax..... you have come to the right place..... - Наука та технологія
useful video - i know its a few years ago you made this - but HK still sell these and I have just purchased two of them - thanks for the video.
Fairly new subscriber, I am working through your content (Like the style of your vids) Flown many stabalisers on FPV models over the years and found this one is very locked in compared to the likes of the old Orange one, I am impressed by this product at the price point..
Thanks Chris..... I was pleasantly surprised by this stabiliser and may get another to test out on a small conventional plane.
One of mine is on a Speedy 600 "Lukewarm" Liner and is great for LOS
I was thinking of a little bi-plane I have..... Its a handful in the wind as it is small
My flying mate Terry installs Frsky S6R & S8R in EVERYTHING, I have ”nearly” all models fitted with The newer Orange with switch and a couple of Aerostar stabilisers, in windy weather they knock at least 15mph of any wind and is great for gusty cross wind landings. They can dull the surfaces a little but they can be switched out in good weather. It is a must for small biplane stress free landings ;-) Years ago the Eagle Tree Guardian was as good as the Aerostar BUT much more expensive. Yea I am a bit of an Aerostar Fan Boy lol.
Another good stabiliser is a Turnegy T1000 mine is installed in a cloud surfer I keep in the car as my FPV hack, I got a PCB from Canada that enables pass through while in GPS Mode so I can fly if with gay abandon and still have RTL on loss of signal !
My mate has the T1000 and used to be from Hobbyking but not seen them for ages. His works fine but the passthrough was a problem as he could only fly with stabiliser. He was ok with that mind.
After purchasing 3 of these my headache finally gone after watching your video. Thanks teamwoolysheep
lol.....its a pain when it defies all logic. I was adding it to my wing and spent ages too. My mate called over and informed me to me to set the radio as a standard 4ch plane and allow the unit to do the mix......blew my mind....hahaha but was such a relief...
Hi, thanks for this videos, can you please show how you connected the stabilizer to receiver. I am new to this.
Thanks
Ray
You will see there are Aileron, Elevator & Rudder in and out connections. if connecting to a conventional plane then set the plane up as normal then unplug the servos from your receiver and plug them into the flight controller OUT set then use the patch leads provided to go from the OUT connections to the receiver. Have a look at this:
hobbyking.com/media/file/716907969X1609378X11.pdf
Hi, I have a question about the mounting position of the Gyro. Will the Gyro still work if I mount it upside down and reverse servo direction? Thanks
Yes it can go in upside down. But you may need access to trim the pots. As ling as lengthways is in line with the fuselage.
Good day, would you be so kind as to send me a simple set up for a fpv sonic ar wing 900 like yours, my pbm. is powering both the vtx to the camera/runcam swift2 i'm new to fpv period, been building and flying for a few decades but i need help on this issue, i'd appreciate your time, Thank you Sir
Please see my AR Wing video that explains the setup in detail.
Regards
Jon
Have you got a link for it plz
They are out of stock at the moment
hobbyking.com/en_us/turnigy-aerostar-flight-control-system-3-axis-aircraft-gyro.html
However, there are some similar ones on Banggood.
www.banggood.com/HobbyEagle-A3-Pro-3-Axis-Gyro-Flight-Controller-Stabilizer-For-RC-Airplane-p-1228810.html?rmmds=detail-left-hotproducts__6&stayold=1&cur_warehouse=CN
Great video! I just bought a Hobby Porter FR810 receiver-flight controller with GPS recently and I'm going mad trying to understand the Chinglish manual to program it! It's horrible! Wish someone would make a video just like this one to show how to operate it!
Cheers!
I just had a look and looks clumsy. If it was me I would set the PID's below 1/2 way and try how it feels. FrSky do a S series receiver and set with a PC. A little bit of a challenge to go through the setup but once you have calibrated its pretty good with stock settings
@@TWSreviews Actually, I bought Flitetest's Aura lite. It is an awesome bit of kit.
Just doesn't have GPS. You can configure it with the buttons on board or use the PC configuration program. I also have an old Turnigy T1000FC with GPS that's still in the box. With our State on lockdown, I need to get busy building.
@@kkuenzel56 Where in the world are you?.....here in the UK we have had really bad weather for months and even really bad floods....as soon as lockdown was introduced the weather turned nice.....I've been in my shed clearing out all my cupboards and repairing things I never had the time to do before....we have a few more weeks of this and really happy that the weather has been so good as rain would be so depressing...... Keep busy, keep distracted.......we will get through this and get back to flying again soon......keep safe
Jon
@@TWSreviews Hi Jon! I'm in Kalamazoo Michigan in the US. My son and his family have lived in London for 7 years now and my wife and I have visited several times. Yeah! Seems like it rains an awful lot in the UK!
Our Governor extended the stay at home till the 30th. Hope things look better by then!
@@kkuenzel56 Not a part of the USA I have visited yet. Do whatever it takes as risking having the virus is not an option. Keep safe and I will get more vids out soon....take care