Top work , Buddy 👍 Got my subframe back on and car rolling again after doing mine. Found the worst bit was under the mounts for the trailing arms. Can I advise that you do a test piece with the Etch Primer before fully applying. I was using Halfords Etch Primer directly over the Vactan and had no issues. I then ran out of this so ordered a few tins of U-Pol Etch Primer, as its good stuff. I used this on the other side of the car the following week. When I went back at a later stage to apply paint, I found that the U-Pol had reacted, so had to rub it back down. Keep the vids coming and looking forward to the updates 👍
Hello Chazz Coombes. I just want to thank you from France. I could do a lot of reparations on my 2005 Mondeo 2.2 TDCI titanimun X (ST style); I replace the radiator, driveshafts, front roll bar supports...and your videos were a very good support and helpfull. So thanks a lot, you do a great job under a car, but an another one as much great to filming your job, cut it, and upload it on youtube. The time that i spent under my car let me thinking that Ford do a great car, not so hard to repare,and a solid one which can pass 20 years without rust (for mine) Un très grand merci pour vos vidéos et votre partage! Amicalement Kind regards
Clean mondeo chazz
Cheers mate, alot of work gone into this now, lol.
@@ChazzCoombes I was keeping my fingers crossed for you that a hole didn't suddenly appear
Top work , Buddy 👍
Got my subframe back on and car rolling again after doing mine.
Found the worst bit was under the mounts for the trailing arms.
Can I advise that you do a test piece with the Etch Primer before fully applying.
I was using Halfords Etch Primer directly over the Vactan and had no issues. I then ran out of this so ordered a few tins of U-Pol Etch Primer, as its good stuff.
I used this on the other side of the car the following week. When I went back at a later stage to apply paint, I found that the U-Pol had reacted, so had to rub it back down.
Keep the vids coming and looking forward to the updates 👍
Hello Chazz Coombes.
I just want to thank you from France.
I could do a lot of reparations on my 2005 Mondeo 2.2 TDCI titanimun X (ST style);
I replace the radiator, driveshafts, front roll bar supports...and your videos were a very good support and helpfull.
So thanks a lot, you do a great job under a car, but an another one as much great to filming your job, cut it, and upload it on youtube.
The time that i spent under my car let me thinking that Ford do a great car, not so hard to repare,and a solid one which can pass 20 years without rust (for mine)
Un très grand merci pour vos vidéos et votre partage!
Amicalement
Kind regards
Impressive work, a great foundation for an epic car 👍
Top work Chazz! I know how you feel but keep going. What primer/top coat you gunna use? Id recommend cavity waxing whn you're done painting 👍
Special