Superposition Rule - Solved Problems

Поділитися
Вставка
  • Опубліковано 30 лип 2019
  • An #electrical #circuit with two #sources are solved using the superposition rule. Contribution of each independent sources found by turning other sources off(making them zero). It is explained how to turn off #voltage and #current sources.
    The solution sheet can be downloaded from the website:
    www.solved-problems.com/circui...
    The Nodal Analysis e-book can be downloaded from here:
    www.solved-problems.com/circui...

КОМЕНТАРІ • 14

  • @mqhelemugqakayisemguni709
    @mqhelemugqakayisemguni709 4 роки тому +1

    Saved my PH 206 electronics course. Very neat slow and easy to understand. Big Up Southern Africa appreciates.

    • @SolvedProblems
      @SolvedProblems  4 роки тому

      Happy to hear that! Please share it with your friends to support the channel.

  • @wf.i.7260
    @wf.i.7260 Рік тому

    Can it ever be the same as the value of the current source? I'm referring to frequency domain with capacitor and inductor.

  • @fitrianis4335
    @fitrianis4335 Рік тому

    In finding ix2, you turn the circuit to series, so where is the line of ix?

  • @yuysaye5404
    @yuysaye5404 3 роки тому +1

    Sir,
    In the video for 09:54, are you sugesstting the node connecting 2 ohm resistor and 3 ohm resistor and the node connecting 4 ohm resistor and 1 ohm resistor are actually the same?
    But that's a wire replacing the voltage source which is short circuited?
    I am a bit confused~~~

    • @SolvedProblems
      @SolvedProblems  3 роки тому

      Well, with the wire connecting them (the short circuited voltage source) both nodes are the same; means it is just one node.

  • @yuysaye5404
    @yuysaye5404 3 роки тому

    Hello Sir,
    why the circuit is not consider as left branch (2 ohm resistor & 3 ohm resistor ) and right branch (4 ohm resistor and 1 ohm resistor) are parallel?
    Instead, the branches are parallel with the combination (2 ohm resistor & 4 ohm resistor ) and (3 ohm resistor and 1 ohm resistor)?

    • @SolvedProblems
      @SolvedProblems  3 роки тому

      In general they are not parallel because the voltage source in middle which has a non-zero current passing through. When the voltage source is made zero, 2ohm becomes parallel with 4ohm and 3ohm becomes parallel with 1ohm.

  • @taimoorahmed4136
    @taimoorahmed4136 4 роки тому

    if the current source is positive 3 then what will be the changes accur in the solution
    kindly guid me

    • @SolvedProblems
      @SolvedProblems  4 роки тому

      Similar solution till minute 12. Then V1=4V, V2=9/4 -> I2ohm=2A, I3Ohm=3/4A, Ix2=5/4A=1.25A and Ix=3.333A

  • @1Vehid
    @1Vehid 4 роки тому

    The link to the ebook is broken