Automating the laser engraver (Portable Laser Machine xTool F1 review) with the robot arm
Вставка
- Опубліковано 4 лип 2024
- I have tested the xTool F1 laser engraver. I wanted to buy this engraver, but xTool company approached me and proposed to review it. I happily accepted it. I also tried to automate this laser engraver with the robot arm. And it works, but it requires some refinement.
Affiliated link (if you use it, if will help my channel, the same price for you):
US Store: www.xtool.com/products/xtool-...
UK Store: uk.xtool.com/products/xtool-f...
www.xtool.com/?ref=skyentific...
Special thanks to my special supporters: Ilya Behr and Cam Smith
Please subscribe. This will help me to develop other projects like this, to bring the bright future closer!
One time donation:
www.paypal.me/Skyentific
If you want to help this channel, please support me on Patreon:
/ skyentific
Instagram: / skyentificinsta
Facebook: / skyentificface
Twitter: / skyentifictweet
#Laser #robotics #Automaion - Наука та технологія
Excellent review, thanks for sharing!
That's awesome man
Turn the engraver 90, let the arm push the start button.
Excellent video, thank you!
Do you know if the software can support engraving sequential serial numbers? If so, can it support sequential serial numbers in a 2d matrix code? What is the practical minimum size for a 2d matrix code? Is there an input on the laser that an output of the robot controller could start the engraving once the piece was in place? Likewise, is there an output from the laser available that coukd signal the robot to retrieve the part once engraving is finished?
I believe you can move the slide extension in sections to have full use of the galvanic head. May have been a firmware update.
Which robot did you use?
Nice video. Can it engrave PCB, e.g. cut the copper layer of ?
What I think would be amazing idea is to put the laser on the arm for Engraving or cutting 3rd dimensional objects I don't know why no laser company has came up with this simple but brilliant idea. Since they use this type of robotic arm for laser cutting
This robot has repeatability of 0.2mm. That isn't good enough for an attached laser engraver. This robot will make a complete mess of the engrave.
Can the infrared laser engrave clear acrylic?
Hi. What are your thoughts on the robot arm used in this video?
Привет. Подскажи, а есть сервы как у mit cheetah, только маленькие, до 5см в диаметре? Или только самому делать?
Cool video, could anyone please share the name of the robot arm that is used in the experiment. Thanks
try hydraulic/pneumatic turbine-to-turbine power transmission lines, instead of bowden cables or axles, ro chains/belts
Надо было и кнопку роботом нажимать, а самому на заднем плане с чашкой кофе газету читать.
Ufactory robot? Which one?
Ufactory lite 6
Looks like a lovely machine! Should we trust our eyesight to goggles that we don't know the quality of? Would it not be better to cover the green cover with something that would completely block out any light from the lasers in addition to using goggles? If we wanted to see what was going on inside the enclose one could mount a little camera and have a monitor on the outside?
Sorry, I always liked to see new trends and interesting solutions from your channel. Unfortunately UA-cam now blocks your videos because I don't want to allow commercials. I will keep my subscription, but if things don't change, within the next weeks the subscription for your channel does not make sense any more. Thanks, Gregor
I understand, but you should also understand that I receive almost nothing from youtube. I cannot make a great project every month (otherwise i will have nothing to eat). So I need to earn money elsewhere, thus the quality of videos deteriorate. To make a DIY video I spent at least one month. And usually I receive around 20-30$ for this video. Which is enough for one burger in my country.
Русский что ли..?
Если судить по акценту, то вероятно носитель русского языка. Я хз как я попал сюда, но видео занимательные