Cammed 2002 Mustang GT - Cold Start
Вставка
- Опубліковано 18 жов 2024
- Twisted Wedge 185 heads, MHS stage 3 cams, Pro Comp intake, Mac Long Tube Headers, Accufab 75mm TB/Plenum, BBK CAI, BBK o/r h-pipe, Steeda Tri Ax shifter, 3.90 gears, Flowmaster 40's, Mail tune....
The "Cold Start" is referring to the engine temp not the outside temp.
I could listen to that all day. Very nice!
I love that sound ,im going out side and start my 03 gt right now so i can lissen to my cammed new edge gt,how about that i got one too,but as much as i love mine i want a cobra new edge too ,my gt has ful bolt ons and i love it it has 73,000 miles on it ive owned it since 2017 and it had 52,000 on it ive totally rebuilt tne front end and new shocks and struts and poly bushings ,ceramic brakes continental extreme trac tires 245son front 265 on back flow master complete exaust comp.262 cams and springs gt 500 followers,ported heads bbk 78mm tb,accel coils 24lb injectors,420gph fuel pump able to run e85 fuel 93 predator tune no govenors ,5.0 short throw shifter,cold air intake 90mm map sensor bbk,200amp altenator,3650 trans with stage 2 clutch and presure plate,allumin drive shaft new high volume 4 core radiator, stock gears,its dark shadow grey with painted custom lace in black stripes,all black leather seats with covers,mach 1000 premium stero ,and im fixing to sub frame connect it she gets into the 12s in the 1/4at 1260 at 115 mph and by gps does 164 mph top end could posibly do more but was running out of hiway and balls,and the fake scoop was about to blow off ,and thats my baby and she is fun and i love your red gt and she sounds sweet too ,well ty for your time im 65 years old and its movie time.
Sounds tough as hell. Nice job.
What cams You have,this sound is espectacular.
My build is similar and going with the 390s like you did. I have people against it, but that's what I want. How are the 390 gears?
them trick flow heads make a monster difference I have the 44cc ones and the fucker pulls hard ass shit with my f1 procharger omg
+Charles Ford Yeah they do. I went with the 38cc because I didn't know if I was ever going to be able to afford turbo or sc. Wish I woulda got the 44cc tho. Can't run forced induction on the 38cc. But the 38cc are real good for n/a. The heads and cams made a monster difference for sure tho.
how much hp do yo have with all those mods ? i have a stock 2002 mustang gt also black with bullit rims 18
+Jose Villegas Not sure. Haven't dyno'd it yet.
how much are the cams ??
+Jose Villegas how much money? I got my heads from Modularheadshop. The cams came with them in a package deal.
+Jose Villegas if you go to their website I think they sell them individually. Modular Head Shop. Stage 3 NA cams
ok thanks
i will check it
Nice cold start on this warm day! I was shocked when it started! lol
How does the car feels with twisted wedge heads ? Can you notice a huge performance difference due to using the best heads for 2v engine ? Or the heads are not worth the money?
+fluboy3434 I love these heads. And with the other mods i have the car pulls pretty hard. I would recommend twisted wedge heads. As far as noticing a huge difference. When i put the heads on i added heads, cams, and long tube headers. I had the other mods on already. But the heads, cams, and headers made a monster difference.
+screwmachine6 thanks for kind and quick response. Take care of your car. I wish I could have this setup right now. Especially after seeing the new n/a gt350 engine.
really trick flow heads flow 250 /190ish out the box / pi ported heads flow 220/190 both at .600 lift the low and mid flow increased but none on the hi lift these heads are really over priced for 20more hp then pi ported trick flow heads are good if you have a shortblock with no valve reliefs then im sure out the box the valve job on the trick flow cant be well throughout there are alittle better then pi's yes 2300 worth hell no
You're right for a perspective. However, from my point of view, due to ptv clearence and spark plug advantage, TFS heads are worth their price.
I fell you they are a upgrade but they could have used bronze guides and if you learn out the box heads the Valve job is probably trash all across the board I would buy them bare and buy your own parts and fresh Valve job. For 2300 I would expect you to be very happy . Also no hate but those heads are only build to provide 20 more hp then stock pi heads watch the trick flow videos of these they say it on there. I'm shooting from 400 with my build in my crown vic p71 using e85 13:1 4:30 rear crazy setup ross piston cobra crankshaft I wanta see use 2v guys win
Lki