I have a club car and noticed the amber light come-on quite often. the cart is fully charged but the amber light still comes on. Would you know what maybe the problem? Thanks.
It’s came with buzzer? So this issue start after fully wash your buggy ? Probably it’s show mean circuit get more electricity. Keep off your main sw and keep buggy fully dry and try again without removing unless. Thank you.
I have a E Zone cart (I know they're not so reputable out there) the forward/reverse switch is just a button with two directions kinda like your regular light switch, my cart will only go on forward but on reverse it only clicks.. any thoughts or help on what I could try I'd much appreciate it
Your Motor controller memory not reset while you turn it to reverse from the forward. It’s has some delay. I hope there is some loose connection check your all inputs. Thank you.
There is no tricks. Hopefully its's not clear for you Bill.Main power connection was broke from inside the cable. so it was not support to the IQDM so and the Motor controller not get any information because of this reason. If you have any Question about Xcar , Club car,Yamaha OBM please let me know by via mail. Thanks for your time.
Tenho um cart desse... Parou de funcionar.. como faço pra colocar pra funcionar... Já testei tudo mais ainda continua com o mesmo defeito.. não se move.. o que eu faço?
Send me pic of your charger. The charger cant operated without buggy. Means need minimum 16vdc in to charger than can automatically charger power up Ac side. Hope you will understand it. Thank you
Main 48v power we received to motor controller but it’s isn’t run. The programmer also so not detected the issue. Finally control sw to motor control cart means control circuit power not received. Wire has been burn out from inside. Thank you.
Dear Anushka. Im a buggy technician as well. මට ගොඩක් සතුටුයි ඔයාගේ මේ චැනල් එක දැක්කම . ගොඩක් ආඩම්බරයි මචං මමත් මාලදිවයිනේ ඉන්නෙ ජයවේවා .. ආඩම්බරයි මචං ❤❤ Good job .keet it up
I have a club car and noticed the amber light come-on quite often. the cart is fully charged but the amber light still comes on. Would you know what maybe the problem? Thanks.
It’s came with buzzer? So this issue start after fully wash your buggy ? Probably it’s show mean circuit get more electricity. Keep off your main sw and keep buggy fully dry and try again without removing unless.
Thank you.
I have a E Zone cart (I know they're not so reputable out there) the forward/reverse switch is just a button with two directions kinda like your regular light switch, my cart will only go on forward but on reverse it only clicks.. any thoughts or help on what I could try I'd much appreciate it
Your Motor controller memory not reset while you turn it to reverse from the forward. It’s has some delay. I hope there is some loose connection check your all inputs. Thank you.
machan super job thawa video ekaka danna
Tenho um cart desse aí.. mais nao funciona.. estava andando normal e dirrepente parou.. como faço pra colocar pra funcionar?
I need more details of your cart. Please mail me current status of your cart with model and if possible images. anushkapr16@gmail.com
Thank you.
@@prasadmotortrading9571 hi
Where is the fuse for brakes on2003 club car
There is Electrical brake. It’s can operate with programmer also there is brake lights switch it’s under the paddle
Thank you.
Ahh, that's how you do that. It is so blanking hard to be sarcastic on the computer
There is no tricks. Hopefully its's not clear for you Bill.Main power connection was broke from inside the cable. so it was not support to the IQDM so and the Motor controller not get any information because of this reason.
If you have any Question about Xcar , Club car,Yamaha OBM please let me know by via mail.
Thanks for your time.
@@Anushkaprashad moro no Ceará... Tenho um cart desse.. estava funcionando perfeitamente e do nada parou.. como faço pra colocar pra funcionar?
Tenho um cart desse... Parou de funcionar.. como faço pra colocar pra funcionar... Já testei tudo mais ainda continua com o mesmo defeito.. não se move.. o que eu faço?
@@Anushkaprashad 👍
Hi sir, im new as buggy operator.. i found 1 buggy wont go f n r .. what the problem? Solenoid or speed sensor.. or motor
Charger on 48 volt club car doesn't work
Send me pic of your charger. The charger cant operated without buggy. Means need minimum 16vdc in to charger than can automatically charger power up Ac side. Hope you will understand it.
Thank you
What are you doing can't hear anything.
Main 48v power we received to motor controller but it’s isn’t run. The programmer also so not detected the issue. Finally control sw to motor control cart means control circuit power not received. Wire has been burn out from inside.
Thank you.