How to basecoat new plaster

Поділитися
Вставка
  • Опубліковано 27 січ 2025

КОМЕНТАРІ • 120

  • @rfnrgj
    @rfnrgj 6 років тому +16

    This fella should have his own TV series.... learnt so much and is my go to guy if attempting something ive not done.. FANTASTIC

  • @alansimpson2217
    @alansimpson2217 4 роки тому +1

    Enjoy watching your vids. Retired but your vids make me want to get into it again!Forty five years as pro painter in Aus but never seen a corner roller.Still learning

  • @zoesmith1536
    @zoesmith1536 7 років тому +4

    You are a legend. I love your no nonsense style to painting. You are really good.

  • @ivanfinlay7758
    @ivanfinlay7758 8 років тому +2

    good job Mark that sort of work would make an old man of you very quick Best wishes from Northern Ireland

  • @JoeProDecor
    @JoeProDecor 3 роки тому

    Great, no nonsense video......ive seen quite a few videos on this subject with Dec's applying the mist coat as though it's a finish..lol....introducing steps that are a waste of time, as we all know it's rare to have a new plaster job that is without any need for snagging/fine filling. I simply apply the mist coat to seal the porous surface and to highlight the areas that need repairing.

  • @1234luke1234luke
    @1234luke1234luke Рік тому

    Old skool gizza! Love it!! Just the way me old taught me but he made me cross roll everything 😂
    To be honest though I have struggled in the past getting a decent roller finish on spray, also spray is a nightmare to touch up.

  • @losttheplot26
    @losttheplot26 Рік тому

    Depends on the sleeve. Can go 18" rolling out is quick. Manufacturers say mist coat with the same top coat instead of trade matt now. Doesn't matter for new plots. Dulux heritage say sand down previous paint before applying.

  • @southcoastsealantsltd
    @southcoastsealantsltd 3 роки тому +1

    Most new builds these days have silicone applied round all the windows internally. I often find the silicone pulls the paint off the fresh plaster. The reason for this is because the fresh plaster has not had a mist coat around the window reveal, it should be cut in right up againt the frame.

  • @youngjock1985
    @youngjock1985 7 років тому +2

    Keep up the good work. Enjoyable videos and informative.

  • @websurfer1585
    @websurfer1585 5 років тому +5

    That's rapid coverage, and I never came across the corner roller before? I've always used a brush, but that is clearly way, way faster, I really need to speed up my decorating, thanks!

  • @mariankuyper3826
    @mariankuyper3826 7 років тому +2

    Excellent video will keep playing it to husband until he does the newly plastered walls

  • @sammymcgee5696
    @sammymcgee5696 5 років тому +12

    I am a 6 ft 19 st painter for 35 years and still use a 9 inch roller got a problem see the wife

  • @2wheelspy
    @2wheelspy 8 років тому +3

    Really good video

  • @markcrotty1868
    @markcrotty1868 7 років тому +3

    absolutely brilliant video💪👍

  • @mileenasbathtubtales2640
    @mileenasbathtubtales2640 4 роки тому

    Will be painting my wall soon and thanks for this brilliant information..keep up the good work Candleman 🕯️🕯️🕯️

  • @southcoastsealantsltd
    @southcoastsealantsltd 3 роки тому

    Thanks for the video i have learnt some great tips

  • @kevinbenstock8116
    @kevinbenstock8116 7 років тому +3

    Hi candleman, what paint did you use for the bare plaster, dulux trade?? also was it a 10 ltr tub or 15 ltr tub?? then the 3 ltrs of water to water it down so it soaks in, good tip, thanks i am learning a lot from you, if you get to paint the top coat on this room you have missed coat, would you give 1 or 2 top coats,?
    and what brand of emulsion do you like the best, and what would be your 2nd choice if on a budget......thanks kevin

  • @thomasjervis490
    @thomasjervis490 3 роки тому +1

    Hi What brand of roller cage are you using here? Thanks

  • @LI0N0FTHETRIBE0FJUDAH
    @LI0N0FTHETRIBE0FJUDAH 10 місяців тому +1

    Hey what the sleeve your using ?

  • @johnpgray
    @johnpgray 8 років тому +10

    Best painting vids on UA-cam

  • @JelyJoy100
    @JelyJoy100 7 років тому +2

    Hi Mark, Great work. Could you please advise what is the best thing to do with PVA stains on the freshly plastered walls? My plasterers decided to do the ceilings last which has left splashes of bonding coat on the walls and is now showing through even after the second emulsion coat, which is very frustrating! We sanded it slightly and prepped the walls but no difference! Your comment would be greatly appreciated.
    Thank you

    • @wallingtonfilming
      @wallingtonfilming  7 років тому

      Elham Mousavian
      Can you send me a pic on fb messager?

    • @SteevoGooner94
      @SteevoGooner94 3 роки тому

      I need help with this. Please help! What’s your Facebook!

  • @CARLIN4737
    @CARLIN4737 2 роки тому

    Where can i get a pair of whites that hang low like that making me look smart and fresh every day like you.

  • @hazelbrownn
    @hazelbrownn Рік тому

    My plasterer suggested I use Leyland super leytex trade paint as a mist coat, is this OK?

  • @mojothepyruttleworthy3270
    @mojothepyruttleworthy3270 4 роки тому

    proper painter took me a while to find a pro awesome tips cheers , deffo getting a corner roller now, got my mates 7 bed complete house and ensuites, to paint all new plaster , I got a new Wagner pro to help , got any tips on spraying dude?

  • @mrbritvic
    @mrbritvic Рік тому

    I had a professional painter come and mist coat but after 2 top coats of finished colour it’s patchy -he wasn’t sure what was wrong -any thoughts ?

  • @pritpal212
    @pritpal212 6 років тому +1

    Good vid. Would you recommend treating the corner beads before misting?

  • @kanhdahar2
    @kanhdahar2 6 років тому +2

    what brand corner roller are you using?

  • @hawomoalin9086
    @hawomoalin9086 4 роки тому +1

    I done first thin layers can use second mist coat same pain amste pain mat

  • @ashrevlution3456
    @ashrevlution3456 5 років тому +3

    Have you considered using a spray gun when mist coating?

    • @antallaczko8793
      @antallaczko8793 5 років тому +1

      No that's too much hassle and masking. 😄

  • @kevinmorse8814
    @kevinmorse8814 5 років тому +1

    Would that be base coat and top coat?

  • @kevinbenstock8116
    @kevinbenstock8116 7 років тому +1

    sorry i forgot to ask in my post below, what is your choice for rollers and paint brushes, (purdy)??? and on a budget, ??, thanks kevin

  • @mawky1
    @mawky1 2 роки тому

    Does it matter if I water down way more than what is quoted on the tin. My tin said 1 part water to 9 parts paint but I watered down 2 paint kettles of paint with one paint kettle of water so will this be OK?

  • @garethdavies7564
    @garethdavies7564 2 роки тому

    hi mate what corner roller are you useing?

  • @davidrowlands7132
    @davidrowlands7132 8 років тому +6

    Buy and airless paint sprayer!! Can Miss coat whole of a 3 bed semi in 1 day. If you got a loade of site work it's well worth £1600

    • @mojothepyruttleworthy3270
      @mojothepyruttleworthy3270 4 роки тому

      Ye got just got one for exactly that ;)

    • @CARLIN4737
      @CARLIN4737 4 роки тому +2

      first off fella its a mist coat and secondly it depends what firm you work for. some boss men get all there plots based out by a team that just do mist coating and some bosses hate the walls being sprayed like this fellas and the painters have to do them by roller.

    • @sinsooty6290
      @sinsooty6290 3 роки тому

      @@CARLIN4737 Only real painters roll 😀

  • @cartucho8454
    @cartucho8454 3 роки тому +1

    what roller brand and nap size are you using?

    • @wallingtonfilming
      @wallingtonfilming  3 роки тому +1

      Rota or Hamilton long pile 🎥🕯☕️🚬

    • @Nofixedabode859
      @Nofixedabode859 3 роки тому

      Is the Hamilton the green one and do you use same one on topcoat thx

  • @orbitalforest
    @orbitalforest 7 років тому +1

    How much do you get for base coating on those plots Mark ?

  • @scottbob3917
    @scottbob3917 8 років тому +2

    where did you get the corner roller from with that sleeve

  • @deemdoubleu
    @deemdoubleu 6 років тому +1

    I used Dulux plaster sealer on our new conservatory and the subsequent paint finish has lasted really well (years now) and looks nice. I imagine it to be PVA based though not sure. So question is why not just use very dilute PVA? If dilute enough, it doesn't leave a film but does seal for painting.

  • @slybunda
    @slybunda 7 років тому +2

    should i use a roller with a short or long pile for the base coat? also should it be microfiber or woven one?

  • @goodbuddy7607
    @goodbuddy7607 7 років тому +1

    Why roll instead of spray and backroll?

  • @hithere3035
    @hithere3035 2 роки тому +1

    Hi Mark, I'm currently painting my own house inside. I have the same purdy pole you're using and Hamilton perfection medium pile sleeve (i was suggested these) I noticed every time you finished rolling and you go to get some new paint on the roller, your sleeve is always looking fluffy, like it's carrying alot of paint. When i finished rolling a wall and i go to get put paint onto my sleeve, it seems like the sleeve is compacted and not fluffy. It's not due to paint still being in the sleeve because when i'm rolling the wall there is no more paint coming off the sleeve onto the wall. Any suggestions to why?

    • @EmiMartinezVillaLegend
      @EmiMartinezVillaLegend 2 роки тому

      The pile of the sleeve you’re using is to small, I’m a new building house painter & we would never dream of using those sleeves you used on your home for the simple reason they don’t hold enough paint

    • @hithere3035
      @hithere3035 2 роки тому

      @@EmiMartinezVillaLegend Appreciate the reply Paul. I paid somebody to do it in the end. I gave up after 1 room. Any suggestions on the sleeve you use? For the future when maybe one of my children rope me into painting some rooms.

    • @EmiMartinezVillaLegend
      @EmiMartinezVillaLegend 2 роки тому +2

      @@hithere3035 something like a 12 inch polyamide roller sleeve would be ideal for you to use at home, they’re very similar to the one Mark is using in this video he’s using a 15 inch here I myself use 18 inch ones

    • @Nofixedabode859
      @Nofixedabode859 2 роки тому

      Hi m8 the pile can go flat if you run the roller too dry as well, think that’s wat your getting at

  • @norris5353
    @norris5353 5 років тому +1

    Great Vids! When u say water down with 3 litres of water to a tub of paint, what we talking 10L tubs, 5L tubs? Cheers 🖒

    • @yomofo101
      @yomofo101 5 років тому

      5

    • @soots-stayingoutofthespotl5495
      @soots-stayingoutofthespotl5495 5 років тому

      It's 10-litre tubs - he's a pro, so we should assume he doesn't use consumer-size 5l tins, but he does actually confirm it below. Therefore, he is talking about a mix of at least 30% water. Some pros say 20%, some say 50%, so that seems like a good compromise.

  • @bradleyballard9294
    @bradleyballard9294 7 років тому +1

    top man for the quick reply

  • @MRBIGTIMEBOXING
    @MRBIGTIMEBOXING 8 років тому +2

    Where can you buy one of the corner rollers?

    • @wallingtonfilming
      @wallingtonfilming  8 років тому +1

      Colin Redpath
      Ebay ☕🕯🚬

    • @MRBIGTIMEBOXING
      @MRBIGTIMEBOXING 8 років тому

      Cool, going to buy one. There's no big brand corner rollers on ebay. There's a few no makes and a fit for the job 1. Didn't know if dulux, purdy Hamilton done them. I'll buy a cheap one of the cheap ones and see how it goes

  • @deadinside6760
    @deadinside6760 8 років тому +13

    I'm one of them wanker that uses a 12inch roller 😁

  • @raefblack7906
    @raefblack7906 7 років тому +2

    good job .

  • @ertaszorlu4756
    @ertaszorlu4756 4 роки тому

    Is there 18 inch roller ? You vids are cool candle man 🍺🕯

    • @wallingtonfilming
      @wallingtonfilming  4 роки тому +1

      Yes but 18” r just that bit to big 4 cupboards under stairs stick with 15”🕯☕️🚬

    • @ertaszorlu4756
      @ertaszorlu4756 4 роки тому

      @@wallingtonfilming ok buddy 15" roller it shall be... 🕯🍺🛠🚬🍩

    • @CARLIN4737
      @CARLIN4737 4 роки тому +1

      theres a 24 inch etc

  • @bradleyballard9294
    @bradleyballard9294 7 років тому +1

    how bigs the tub you use of paint pls answer

  • @krakadylius1
    @krakadylius1 3 роки тому

    Hi. What sleeve do you recommend to use? Medium or long pile? Thank you

  • @mshomefire
    @mshomefire 6 років тому +1

    Thanks very useful

  • @fbasidehustle1
    @fbasidehustle1 8 років тому +1

    Any recommendations as to whats the best corner roller/sleeve you use ? 👍

    • @wallingtonfilming
      @wallingtonfilming  8 років тому

      Stephen Martin
      Dulux if you can find one 🎨🎨🎨☕☕

  • @jnazari5793
    @jnazari5793 6 років тому +2

    Thanks for the clip but why are you painting over wires

    • @yomofo101
      @yomofo101 5 років тому

      Those wires will end up in the walls.

  • @davidskeeterskeeter1835
    @davidskeeterskeeter1835 7 років тому

    Fuck me,!! I can see your not on daywork Mark,! 😂😂😂. respect from Dave, I was a housebashing Spread,,So I know where your coming from,! 👍👍👍👌🇬🇧

  • @MarcGray1990
    @MarcGray1990 8 років тому +1

    well said matey.... just keep my 18 inch close to hand ... 😉

  • @boxingfanbarry1339
    @boxingfanbarry1339 5 років тому +1

    I've always used a 12"

  • @Aslamkhan-z8p
    @Aslamkhan-z8p Рік тому +1

    Hi

  • @antallaczko8793
    @antallaczko8793 5 років тому +2

    No BIN primer on corner beads? It will be rusty in a year. 👍

    • @hardworker8030
      @hardworker8030 5 років тому +1

      Do you use bin primer before or after the mist coat.

    • @antallaczko8793
      @antallaczko8793 5 років тому +1

      @@hardworker8030 before mist coat. In that way I am sure the corner bead gets a proper coat on the surface. I know it's much easier after the first coat to apply the primer, and your budget is tight on site jobs.

    • @hardworker8030
      @hardworker8030 5 років тому

      Would you know what you can paint over polished plaster.

    • @antallaczko8793
      @antallaczko8793 5 років тому +1

      @@hardworker8030 a clear sealant, stabiliser at first. Johnstones has one or you can look for Bagar Prim primer. Both are water based, no flashing or flaking.

  • @staffh3815
    @staffh3815 5 років тому +1

    18 inch ok for behind radiators but for bigger areas I use a 25 inch purdey colossus

    • @garnhamr
      @garnhamr 5 років тому

      size isn't everything love

    • @staffh3815
      @staffh3815 5 років тому +1

      @@garnhamr it is on price pal

  • @khalifaishaq9143
    @khalifaishaq9143 6 років тому

    Good job thank you

  • @johnblaze8092
    @johnblaze8092 2 роки тому

    Not gonna lie lol, this level of quality isn't going to cut it with the rich folks or if you plan to put some expensive technic on those walls.

  • @naturalny145kg4
    @naturalny145kg4 4 роки тому +2

    Speed graco

  • @tombrooks2015
    @tombrooks2015 5 років тому +2

    im one of them wankers that cut in with a brush lmao ;)

  • @khalifaishaq9143
    @khalifaishaq9143 6 років тому +1

    Yes

  • @ajb1684
    @ajb1684 3 роки тому +1

    Spray it 😊

  • @michaeleinstein7097
    @michaeleinstein7097 6 років тому +2

    GRATE JOB

  • @beijaflor1492
    @beijaflor1492 5 років тому +1

    😆😆😆🌟🌟🌟😆😆😆

  • @jimmycooper7390
    @jimmycooper7390 8 років тому +4

    It's all about size with you aint it? lol

    • @wallingtonfilming
      @wallingtonfilming  8 років тому +2

      Darren Greenshields
      So the girls say, I never hear them complaining 👱🏽‍♀️👩🏼👍

    • @MarcosJ-mq4lk
      @MarcosJ-mq4lk 8 років тому

      Why dont you use a striking brush?

    • @chrispink72
      @chrispink72 5 років тому

      @@wallingtonfilming what make of roller sleeve was you using mate ? Ive always used purdy colossus/ extra 9" 12" but they don't do a 15"and the 18" can get very tiring and i find them a little too big for house bashing. Ive used corner rollers for years for first coating, be nice if they were easier to purchase with screw on rathen than crappy push on.

  • @davidharness1507
    @davidharness1507 5 років тому +1

    It's Charlie Chaplin

  • @ertaszorlu4756
    @ertaszorlu4756 4 роки тому

    Candle man the size of the roller is not important, it’s how you use it that matters...🥸😏🕯

  • @Lloyd1885
    @Lloyd1885 4 роки тому

    'Base coat' ?????

  • @staffh3815
    @staffh3815 5 років тому +1

    Corner rollers leave a terrible finish use a sticker pal

  • @Lloyd1885
    @Lloyd1885 5 років тому +2

    Whats all this talk of 'mist' coat?...lol..double coat?, I bet the spess dont say that lol
    Two on the ceilings, two on the walls, woodwork gets smashed in at the same time, (along with the pipes!) gloss up in the morning..pub by 12, 1200 quid in your pocket for three days work...lovely
    Gorrn the house bashers!

  • @MrAndychannon
    @MrAndychannon 6 років тому +1

    can i work with you for nothing for a week. I'd pick up shit loads

  • @11982463
    @11982463 7 років тому +1

    looking up painting ceiling? where are your goggles..

  • @ricocaswell3030
    @ricocaswell3030 6 років тому +2

    Cant spray because it dose a good job LMAO

    • @Colwray1
      @Colwray1 5 років тому

      Rico Caswell I would spray that room any day of the week!! Be stupid not too if you can 😂

  • @martinsweeney2772
    @martinsweeney2772 6 років тому +1

    if your that clever why don't you get a paint sprayer

    • @kenjordan4950
      @kenjordan4950 6 років тому

      As he explained - his boss says no.

  • @krzysztoflaskowski6110
    @krzysztoflaskowski6110 5 років тому +2

    Just my 2 pence...get a bit longer extention pole mate so your arms dont get tired by having them unnaturally stretched in the air while rolling the ceilings
    Also, by watching your videos i realized that you never done any of high quality painting in expensive, high standard apartments costing in excess of 1 million up...
    What you doing is just f.....g splashing the paint on to the wall as quick as possible
    If you would have been given diamond eggshell or dismond matt to paint all your painting would be spoiled
    And its not hate...it is just what it is
    Sorry mate