BEAMNOVA 100W Electric Hot Knife Cutter, 932°F (500° C) 4 Blades, Case, Wire Brush REVIEW

ORDER BEAMNOVA 100W Electric Hot Knife Cutter, 932°F (500° C) 4 Blades, Case, Wire Brush HERE: amzn.to/3AXAEuj
VISIT The BEAMNOVA Store HERE: amzn.to/3KTvJ23
As an Amazon Associate I may earn from qualifying purchases.
This electric hot knife has 100W power, the maximum temperature can be heated up to 932°F (500° C), it can work continuously, and the temperature can be adjusted steplessly usinmg the top knob; the sharp blade can quickly fuse, avoid loose lines, and achieve silky cutting. Professional knife holder and connecting frame.:Hot knife rope cutter is Metal knife holder, more efficient in heat conduction; the knife holder is connected to the blade to protect the front shell of the host; the metal tail hook is more convenient to hang and place; compact one-piece body, better feel. 【Non-magnetic nickel-chromium alloy blade*4 kinds】This hot knife cutter super high temperature resistance, corrosion resistance, R type--cutting cloth, leather, etc. are used together with pressure plate to realize pad-free cutting; Arc type--thick flat cloth; Pointed type --Cut plastic tubes; Shovel head --Remove dirt and clean surfaces such as glue. 【Applicable】Hot knife fabric cutter Can be used to cut sponge, foam, plastic rubber acrylic sheet, carpet PVC pipe, synthetic fabric, rope weaving, canvas, leather, and also can be used to clean cork dirt. Simple and smooth! Save material! No burrs! Fast edge sealing. 【Portable and Safe】The foam hot knife small size, easy to carry. The electronic micro switch can be turned off when you leave your hand for the safety of the user.

[@ShaneB666]

Bit of a stupid question but do the blades have a specific resistance or can I make a blade to from wire to cut a profile in styrofoam?

[@jeffgrave]

From my testing, the blades do have a specific resistance. If you were to measure that, then make a custom blade pastern with the same resistance, it should work.

[@ShaneB666]

@@jeffgrave Thanks, l did try just some wire after posting question and did not heat up. So out with the ohm meter…

[@kolandaivel3347]

Hi..is any cutter available to cut PE sheets with 3mm thickness..

[@jeffgrave]

This will work, just requires a little more time making the cuts.

[@jeffgrave]

ORDER ZOTEK ZT-702S 2-in-1 Oscilloscope/Multimeter with 2.8" IPS Display, Single Channel 10MHz Bandwidth, 48MS a/s Sampling Rate HERE: amzn.to/3VWKtTf
VISIT The ZOTEK Store HERE: amzn.to/3W2rSW4