Great video thank you! Here's how I set up my timer... To be able to stop or start the timer... Assign the timer to the upper left 'stop/run' Switch A or SwA. This way when you power up your heli by pushing that switch A to 'run' then the timer will automatically start, fly for a while, land for a rest powering down the heli by clicking switch A to 'stop' and the timer will automatically stop. That's how I have mine set. With the 5000 Li-Po I fly for 16.5 mins. and that ends up with good Li-Po storage voltage of 3.81v per cell. Also, If I want to reset my timer, like if I accidentally go from stop to run when the heli is not ready to power up and the timer had started, I also assigned my timer 'reset' function to 'Key 2' which is a round button on the back side of the radio, it's the one on the right side of the back when the front of the radio is facing me. This way if I want to reset my timer, I just push that 'Key 2' button and the timer resets to 16:30 mins. But I need to be careful not to accidentally push that timer reset button on the back while I'm flying or my flying time set is ruined. I tried using the 'Key 1' button on the left of the back side for my timer reset, but would at times accidentally push it and reset the timer, so I changed it to 'Key 2' on the back right side, and I've not accidentally pushed it so far, but have come close. Before learning how to set my radio timer, I carried in my pocket a simple digital kitchen timer, but would always need to remember to start & stop it, and sometimes I'd forget and lose track of my flight time knowing when to land. The radio flight timer is so much easier to use, can see it on the radio screen. But when it gets dark out, can't see the timer on the dark screen, so I need to tap the screen in an open space to turn the screen light on for a while. I'm going to try to see if there is an adjustment to keep the screen light on longer, or for my whole flights, will just use more battery power & need new batteries more often.
I only see start and reset,what about stop,example,timer is set for 15 min, I am flying for 8 min,bring it in to check something out,would like to just stop the timer not reset it.
To be able to stop or start the timer... Assign the timer to the upper left 'stop/run' Switch A or SwA. This way when you power up your heli by pushing that switch A to 'run' then the timer will automatically start, fly for a while, 'bring it in' as you wrote, then power down the heli by clicking switch A to 'stop' and the timer will automatically stop. That's how I have mine set. With the 5000 Li-Po I fly for 16.5 mins. and that ends up with good Li-Po storage voltage. Also, If I want to reset my timer, like if I accidentally go from stop to run when the heli is not ready to power up and the timer had started, I also assigned my timer 'reset' function to 'Key 2' which is a round button on the back side of the radio, it's the one on the right side of the back when the front of the radio is facing me. This way if I want to reset my timer, I just push that 'Key 2' button and the timer resets to 16:30 mins. But I need to be careful not to accidentally push that timer reset button on the back while I'm flying or my flying time set is ruined. I tried using the 'Key 1' button on the left of the back side for my timer reset, but would at times accidentally push it and reset the timer, so I changed it to 'Key 2' on the back right side, and I've not accidentally pushed it so far, but have come close. Before learning how to set my radio timer, I carried in my pocket a simple digital kitchen timer, but would always need to remember to start & stop it, and sometimes I'd forget and lose track of my flight time knowing when to land. The radio flight timer is so much easier to use, can see it on the radio screen. But when it gets dark out, can't see it, so I need to tap the screen in an open space to turn the screen light on for a while. I'm going to try to see if there is an adjustment to keep the screen light on longer, or for my whole flights, will just use more battery power & need new batteries more often.
I have a question about the i6x from flysky. I know that you can bind 20 receivers to it and I was curious to know if there was a way to switch between the receivers using the switches instead of manually selecting it on the screen can the switches be used to switch between receivers?
Great video thank you! Here's how I set up my timer... To be able to stop or start the timer... Assign the timer to the upper left 'stop/run' Switch A or SwA. This way when you power up your heli by pushing that switch A to 'run' then the timer will automatically start, fly for a while, land for a rest powering down the heli by clicking switch A to 'stop' and the timer will automatically stop. That's how I have mine set. With the 5000 Li-Po I fly for 16.5 mins. and that ends up with good Li-Po storage voltage of 3.81v per cell. Also, If I want to reset my timer, like if I accidentally go from stop to run when the heli is not ready to power up and the timer had started, I also assigned my timer 'reset' function to 'Key 2' which is a round button on the back side of the radio, it's the one on the right side of the back when the front of the radio is facing me. This way if I want to reset my timer, I just push that 'Key 2' button and the timer resets to 16:30 mins. But I need to be careful not to accidentally push that timer reset button on the back while I'm flying or my flying time set is ruined. I tried using the 'Key 1' button on the left of the back side for my timer reset, but would at times accidentally push it and reset the timer, so I changed it to 'Key 2' on the back right side, and I've not accidentally pushed it so far, but have come close. Before learning how to set my radio timer, I carried in my pocket a simple digital kitchen timer, but would always need to remember to start & stop it, and sometimes I'd forget and lose track of my flight time knowing when to land. The radio flight timer is so much easier to use, can see it on the radio screen. But when it gets dark out, can't see the timer on the dark screen, so I need to tap the screen in an open space to turn the screen light on for a while. I'm going to try to see if there is an adjustment to keep the screen light on longer, or for my whole flights, will just use more battery power & need new batteries more often.
awesome thanks, i will be setting that up on my tx
thank you great video
How did you turn the throttle to normal from the self centering?
how can i increase the volume of the timer?
I only see start and reset,what about stop,example,timer is set for 15 min, I am flying for 8 min,bring it in to check something out,would like to just stop the timer not reset it.
To be able to stop or start the timer... Assign the timer to the upper left 'stop/run' Switch A or SwA. This way when you power up your heli by pushing that switch A to 'run' then the timer will automatically start, fly for a while, 'bring it in' as you wrote, then power down the heli by clicking switch A to 'stop' and the timer will automatically stop. That's how I have mine set. With the 5000 Li-Po I fly for 16.5 mins. and that ends up with good Li-Po storage voltage. Also, If I want to reset my timer, like if I accidentally go from stop to run when the heli is not ready to power up and the timer had started, I also assigned my timer 'reset' function to 'Key 2' which is a round button on the back side of the radio, it's the one on the right side of the back when the front of the radio is facing me. This way if I want to reset my timer, I just push that 'Key 2' button and the timer resets to 16:30 mins. But I need to be careful not to accidentally push that timer reset button on the back while I'm flying or my flying time set is ruined. I tried using the 'Key 1' button on the left of the back side for my timer reset, but would at times accidentally push it and reset the timer, so I changed it to 'Key 2' on the back right side, and I've not accidentally pushed it so far, but have come close. Before learning how to set my radio timer, I carried in my pocket a simple digital kitchen timer, but would always need to remember to start & stop it, and sometimes I'd forget and lose track of my flight time knowing when to land. The radio flight timer is so much easier to use, can see it on the radio screen. But when it gets dark out, can't see it, so I need to tap the screen in an open space to turn the screen light on for a while. I'm going to try to see if there is an adjustment to keep the screen light on longer, or for my whole flights, will just use more battery power & need new batteries more often.
Does it support kk2.1 FC
How to run motor with fs i6 transmitter
very good tuto i use it for may flywing helicopter, on on swich A but reset on switch Return home swc ,
Does FS-i6S has a custom firmware?
I have a question about the i6x from flysky. I know that you can bind 20 receivers to it and I was curious to know if there was a way to switch between the receivers using the switches instead of manually selecting it on the screen can the switches be used to switch between receivers?
Hi! I haven't seen anything like that. It would have to be flashed with a custom firmware or something.
please make a drone with kk flight controller and fs-i6s full Function satup plz plz plz plz plz plz
Hiiii