It is like passing a car crash on the highway. You don't want to see the carnage, but you can't look away. And afterwards, you regret having taken a peak at someone else's tragedy! 😢
Pretty sure Chad got fired from the Boeing production line. So sad to watch this episode. Complete stupidity not taking time to analyse what was wrong.
You talk about saving time but you rush thjough tjhings that cost you to spend more time. The headlights should have been mounted then taken off to paint!
I used to love to watch this UA-cam channel, which I have done for a couple of years at least. However the constant lack of planning, the use of tools that should have made their way to the bin years ago, the working on a dirty floor, the use of a single electrical extension cord to use 3 different tools, the regular disregard for safety and worst of all, the push-ups, all of this is getting to me and watching this is no longer pleasurable. I have learned good and useful things from Chad but nowadays, it seems that the only thing we learn is how not to do things. Any halfway good Chad would have done a dry fit of these headlights before painting, which would have uncovered ahead of time that the threads do not match. Painting the headlights, which look good, without addressing the rust inside the pods is sloppy and unprofessional. Given, that's his car and he can do whatever he wants with it and nobody is obligated to watch. But I think some of us resent the butchering of a nice original car, and maybe there's more trouble in paradise than the eye can see. Jolene certainly looks miserable lately, and there is a feeling that the fun is gone, hopefully temporarily. And there is always the risk than this car, like too many others, may never get finished.
No stopping to question if the nut is the right one, no wire wheel, no tap or die, no wire brush, no lube, just force that nut on with an impact. And when that doesn’t work cut a groove in the threads using the only tool you know how to actually use. That’s the way the pros do it.
And his first shot at cleaning the male threads just rounded the peaks with no attention to cleaning the grooves. This guy is dumber than a box of non-working vise grips!
Wow, you haters are so freaking ridiculous, It’s almost funny. What a bunch of nut cases you are. The only solace I take is that you haters are the ones making bad Chad a whole lot of extra money with your ridiculous comments. So keep them coming. Bad Chad and his queen are laughing their asses off when they’re just hanging around in the house. Trying to tell a multimillionaire how to run his UA-cam channel. That amazes me and you never ever miss an episode. So the rest of us know how much you like the channel, but you just can’t stand bad Chad being so very successful and you cats are probably living in mama’s basement. 😝😝
oh and your there to see this? your chilling out with the "high end builders" and getting a laugh in?.....hmmmm thats funny hes visited many high end shops, many of whom watch and enjoy him...try again lol...or just keep pulling comments out of your ass you know nothing about.
He told the guy he bought it off...he will probably make a few small changes. The guy said "once it's yours...you can do whatever you like". Why do you all come to watch and cry about what another man is doing with HIS car 🤷♂️
@@howquickBecause it's called freedom of speech here in the USA and there's nothing you can say to stop people from giving their opinions or the way they feel So if you don't like what people are saying don't read the comments and just watch the video 😭
@@howquick I’ll tell you why, because they are so so damn jealous of bad Chad that they can’t sleep at night so they think by running him down, it justifies their miserable freaking life they live. What do 90% of the population do when they don’t like a UA-cam channel? They don’t freaking watch it. But these cats love love love this channel, but just are so so jealous a bad Chad and his queen making millions of dollars off of their ridiculous comments. Peace, brother. ✌🏼😎💯💪🏼💪🏼
That air gun session was so sad - I'd hate to see him have to change a tire. Just grab a box end wrench FFS! No, go for the zip cut and be groovy rather than get the proper nut. But no! Frankie S. aka BC says "I'll do it my way". Keep doing the same thing with no result until a miracle happens. "Good enough!?" Boyd C. is spinning in his grave.
The ball and socket arrangement on the lights is to enable adjustment. You left them frozen with rust. No adjustment. I'm not a hater but you need to use your head.
No, maybe you’re not a hater, maybe you’re just jealous of bad Chad that he started a UA-cam channel to show the average person how they can build a custom car without hardly any tools and not much money and do it in their garage with what they have!! The keywords here is WHAT THEY HAVE now knock it off with your nonsense. If you wanna watch a channel who has all the fancy tools and does everything the exact right way than you are watching the wrong channel because that is not what this channel is about.
@@raydenney6986 it’s funny….if Chad said it like that to his son….all the ‘haters’ would have a field day and call him for everything. You could have just said “the ball and socket arrangement is to enable adjustment. They’re probably rusted up. If you clean the rust off…they might be ok”. THAT is constructive criticism. “YOU left them frozen…YOU need to use your head” is NOT constructive….it’s demeaning. 🤷♂️
@@BruceWitcpalek-ws1rh Sorry, my bad. I've been working on cars pretty much as Chad does since I was fourteen. I'm 87, and have always worked on the floor as does Chad. Could never get used to a bench,
@@raydenney6986I'm pushing 75 in a couple of months and I've also been working on cars since I could crawl under them with my Dad. My problem is that now if I get down on the floor I can't get back up. 😁😁😀
How can Chad be sooooo blind to the correct fix on this thread issue? It’s almost embarrassing to tell him what he needs to do. Tell you what, let queen Jolene do the wrenching and Chad hold the camera, that’ll get it done.
"To me it's a no brainer to use this stuff" Right Chad... only those with no brain would use plastic chrome on an antique car. It's just so fitting for the period and patina of the car. 🤣
Yup. No one painted white walls on with a brush back in the day either or taped up leaking exhaust or bondoed the shit out of their hotrod before rolling on some housepaint. They would have used bad chad chrome if they had it.
@@vnvracer1384 now you are hating on Queen Jolene with the white walls being painted just to mock up a car. You probably don’t know what mock up means. But hating on Queen Jolene really shows just how much freaking class you have. 🤬🤬🤬🤬
Jolene If I may say,,,, I been watching you guys for some years now, Something I don't understand is why Chad is not properly prepared for the videoing that you do as he has many times runs out of material, screws, bolts, etc and he doesn't seem to make sure that things will go back together without an issue, before you put the video on for the day, Chad spends a lot of time looking for things, to me he just not properly organised can you teach him ????
Chad is set in his ways, old dog & new tricks, there is no use in trying to control him, just take what you like & throw away the rest, & keep quiet in the back row, stop complaining, & just be thankful to be invited in to watch the show…🤫
Correct . How many times in the last video did he go outside to spray the headlight's , I gave up counting after 18 journey's . Why not take them all out , spray them and , bring them back in 2 at a time ? As you say no forward planning before starting the video i.e. , have everything to hand .
I had a long rant about your show but I deleted it. It all boiled down to WTF has happened to your show? I've watch you for years.... I'll watch you today.... but damn man....!
Dude. Take some basic mechanics class at the community College. If a nut does not fit because it is the wrong thread or stripped you don't just hammer it on. Replace the bolt or get a tap and die set. Or a chaser set. It is micky mouse to the extreme.
@@leblanckerry4826 because he does not need one like you need. That is the awesomeness about Chad and Jolene. They can make things cheap and they are millionaires.
"The Gong Show is known for its absurdist humor and style, with the actual competition secondary to the often outlandish acts presented; a small cash prize has typically been awarded to each show's winner. Each show presented a competition of amateur performers of often dubious talent, with a panel of three celebrity judges."
It will be alright, Chad isn’t building granite megalithic structures to withstand the cataclysms, simmer down & remain calm, none of these cars will be around in a 1,000 years?…🤫
If it were me, I would go find me a small block Ford motor like a 289/302 but no Mr. Know-It-All Chad gets the first one he comes up with, a GM. What a brilliant move!
>302.... Cleveland or Windsor? >Know-It-All Chad.... Like as if Chad and his new buddies are going to swap out the engines and get that drivetrain working over the weekend. 🤣
@@michaelmccabe2647 SOMEONE GAVE HIM THE ALLEGED BRAND NEW 265 HE IS A PENNY PINCHER ASK ABOUT HIS PAINT BOOTH FAN THATS BEEN BROKEN FOR YEARS AND YEARS
Chad's wrenching it. Nothing gets done today! This guy would screw up a junk yard and that's hard to do! Took an hour to mount two headlights half azz. Jeez🥴
Chad you won’t learn anything by comments patting you on the back. The viewer that are telling or giving suggestions are the comment you need to read (even negative comments are good comments)
Your really looking dump now thought all the years been doing this work you would improve your skills, but lately you been showing how bad worse you getting rushing things stuffing up so much.
Just gets a bit more nutty every day 😂
Working like an impatient child.
It is like passing a car crash on the highway. You don't want to see the carnage, but you can't look away. And afterwards, you regret having taken a peak at someone else's tragedy! 😢
Pretty sure Chad got fired from the Boeing production line. So sad to watch this episode. Complete stupidity not taking time to analyse what was wrong.
Many people are getting tired of it so problematic one mistake after another he’s so busy a lot of talk but nothing happens 😢😢
I just read the comments nowadays.
Unbelievable. Even the fanboys will give up on him soon
RIP '34 Ford.
You talk about saving time but you rush thjough tjhings that cost you to spend more time. The headlights should have been mounted then taken off to paint!
Where is the line, between simple person and simpleton ?
I used to love to watch this UA-cam channel, which I have done for a couple of years at least. However the constant lack of planning, the use of tools that should have made their way to the bin years ago, the working on a dirty floor, the use of a single electrical extension cord to use 3 different tools, the regular disregard for safety and worst of all, the push-ups, all of this is getting to me and watching this is no longer pleasurable. I have learned good and useful things from Chad but nowadays, it seems that the only thing we learn is how not to do things. Any halfway good Chad would have done a dry fit of these headlights before painting, which would have uncovered ahead of time that the threads do not match. Painting the headlights, which look good, without addressing the rust inside the pods is sloppy and unprofessional. Given, that's his car and he can do whatever he wants with it and nobody is obligated to watch. But I think some of us resent the butchering of a nice original car, and maybe there's more trouble in paradise than the eye can see. Jolene certainly looks miserable lately, and there is a feeling that the fun is gone, hopefully temporarily. And there is always the risk than this car, like too many others, may never get finished.
Is there a short version of this comment, LOL!
Dude really? Trying to force your opinions on people hahs
If it bothers you so much why do you continue to watch? Not very intelligent to watch something dailey that you apparantly hate so much.😂😂😂😂
I think you are bang on, I only watch it now because it is so awful
Yes those push ups whats with that 😮😅😊
Fina has more sense than the two of them put together😂😂😂😂
The sealed beam lamps will be 90% out of true! This is because the headlamp buckets are meant to be side mounted not vertically mounted
Your son needs to set boundaries on you instead of the other way around.RESPECT
Bingo
No stopping to question if the nut is the right one, no wire wheel, no tap or die, no wire brush, no lube, just force that nut on with an impact. And when that doesn’t work cut a groove in the threads using the only tool you know how to actually use. That’s the way the pros do it.
And his first shot at cleaning the male threads just rounded the peaks with no attention to cleaning the grooves. This guy is dumber than a box of non-working vise grips!
Does he know what die is
No tap and die set in that shop, just force it !
And he gets PAID for this ??
Wow, you haters are so freaking ridiculous, It’s almost funny. What a bunch of nut cases you are. The only solace I take is that you haters are the ones making bad Chad a whole lot of extra money with your ridiculous comments. So keep them coming. Bad Chad and his queen are laughing their asses off when they’re just hanging around in the house. Trying to tell a multimillionaire how to run his UA-cam channel. That amazes me and you never ever miss an episode. So the rest of us know how much you like the channel, but you just can’t stand bad Chad being so very successful and you cats are probably living in mama’s basement. 😝😝
I bet there are a lot of high-end car builders that see him and it is quite a laugh for them
I bet there's a lot of low end builders out there too that laugh.
oh and your there to see this? your chilling out with the "high end builders" and getting a laugh in?.....hmmmm thats funny hes visited many high end shops, many of whom watch and enjoy him...try again lol...or just keep pulling comments out of your ass you know nothing about.
Only here for the comments
You can’t learn skills like this. This guy is breaking good progress everyday. WTF Badly Chad. The worst.
Gene Winfield cried when he saw this, but not in a good way!!!
That was completely unnecessary with the headlights. What's going on in his head? 🤦🏼♂️
Nothing going on... that's the problem.
Who forces mismatched threads together to make it mate together?? Oh, I know who'd do that..
What a freaking mess.
The workshop is a disaster area,no proper bench😂 or vice to work with, just the floor! But what can you expect when it is run by The Mad Hatter.
😂😂😂😂😂
Did everyone forget about the “ we’re going to keep it original “ and not chop it up!
I guess he changed his mind.
Almost like it's his car!
He told the guy he bought it off...he will probably make a few small changes. The guy said "once it's yours...you can do whatever you like". Why do you all come to watch and cry about what another man is doing with HIS car 🤷♂️
@@howquickBecause it's called freedom of speech here in the USA and there's nothing you can say to stop people from giving their opinions or the way they feel So if you don't like what people are saying don't read the comments and just watch the video 😭
@@vnvracer1384 I know, right ?? These clowns think it’s their car that bad Chad is customized. ✌🏼😎💯
@@howquick I’ll tell you why, because they are so so damn jealous of bad Chad that they can’t sleep at night so they think by running him down, it justifies their miserable freaking life they live. What do 90% of the population do when they don’t like a UA-cam channel? They don’t freaking watch it. But these cats love love love this channel, but just are so so jealous a bad Chad and his queen making millions of dollars off of their ridiculous comments. Peace, brother. ✌🏼😎💯💪🏼💪🏼
That air gun session was so sad - I'd hate to see him have to change a tire. Just grab a box end wrench FFS! No, go for the zip cut and be groovy rather than get the proper nut. But no! Frankie S. aka BC says "I'll do it my way". Keep doing the same thing with no result until a miracle happens. "Good enough!?" Boyd C. is spinning in his grave.
LoL…Boyd Coddington was 1000% more toxic!…😖
A ME NOT VERY GOOD AT THIG TO BUT ME THIG YOU RITE
@@derangedhermit2879but Boyd really did build crazy expensive sought after cars.
Boyd had a big crew, too much drama and took a lot of man hours to build over priced cars you wouldn't dare to drive.
Trailer queens.
@@vnvracer1384 and Chad builds piles that also have to be trailered! Same attitude as well
i come for the comments... read them and you know what has happened in the episode.
BAD CHAD can fix it get the coat hangers out and the plastic chrome, 🤣😆😅
Its the wrong tread chad
Chad's kid is coming back because they know that Jolene is soon gone!!!
Can't make this sh*t up folks... I guess putting a wrong threaded nut on is like putting a battery cable on the wrong terminal.🤭
🤣 Bad Chad comedy hour
love this
Lol 😂😂😂 lol hehe I didn't see the outcome of the battery cable drama 😅😅
Fuck i feel for that poor dog bored as shit and has to listen to bull shit all day
Fina is lucky she can't read then she would be faced with reading your crap as well :)
Must not be a dog owner.
They love their masters voice.
Look what we have here, a Dog expert who knows what Fina is thinking…. You win the Internet today for the stupidest comment ever.
@garrypritchard1658 yeah....should be outside in the snow. 🤷♂️🤡
Rude.
it's actually painful to watch him at times...like now.
Proper
Preparation
Prevents
Piss poor
Performance
All the half assing today . Then the whole time repeating his explanation to try and make it sound like he is doing it correctly 😂
"The reason being is"... 🤭
You know what ever Chad says after that it's a bunch of BS to rationalize what he's screwed or is about to screw up.
The ball and socket arrangement on the lights is to enable adjustment. You left them frozen with rust. No adjustment. I'm not a hater but you need to use your head.
To many you are a hater!!
No, maybe you’re not a hater, maybe you’re just jealous of bad Chad that he started a UA-cam channel to show the average person how they can build a custom car without hardly any tools and not much money and do it in their garage with what they have!! The keywords here is WHAT THEY HAVE now knock it off with your nonsense. If you wanna watch a channel who has all the fancy tools and does everything the exact right way than you are watching the wrong channel because that is not what this channel is about.
@@raydenney6986 it’s funny….if Chad said it like that to his son….all the ‘haters’ would have a field day and call him for everything. You could have just said “the ball and socket arrangement is to enable adjustment. They’re probably rusted up. If you clean the rust off…they might be ok”. THAT is constructive criticism. “YOU left them frozen…YOU need to use your head” is NOT constructive….it’s demeaning. 🤷♂️
@@BruceWitcpalek-ws1rh Sorry, my bad. I've been working on cars pretty much as Chad does since I was fourteen. I'm 87, and have always worked on the floor as does Chad. Could never get used to a bench,
@@raydenney6986I'm pushing 75 in a couple of months and I've also been working on cars since I could crawl under them with my Dad. My problem is that now if I get down on the floor I can't get back up. 😁😁😀
Thank God he's just doing this for himself on UA-cam couldn't make it in the real world building cars for a customer I don't think so
How about a tap and die set?
At this point, Chad might make more money by letting people pay him not to destroy these cars!!!
I wonder if he knows the difference between a fine thread and a coarse thread probably never heard of a thread chaser
Thank God he doesn't build stuff you actually have to drive
How can Chad be sooooo blind to the correct fix on this thread issue? It’s almost embarrassing to tell him what he needs to do. Tell you what, let queen Jolene do the wrenching and Chad hold the camera, that’ll get it done.
Wow, you are so intelligent 😮
Hard to watch!!!!!!
So what are you doing there🧠
@@JeanFrenchinGambiait’s like a car accident.
I say that a lot of the time lately that's why I wait till it's over to watch it
@@donniemaceachern4673 like two fingers in the socket you stop and you put it again until your brain stops it😉😅🤭 if you have one🙏👋
@@jbishop7037except everybody lives and then they go on to sell sham wow car wax products on infomercial ads at 3am
You have the wrong nut. The threads are different from the light. stick to the welder and grinder. Face it Chad that is all you know!!!
The plastic chrome is awful.
Don't do this at home ......
You probably cant.
Chad and Jolene are crazier than a blue jay flying backwards! 😂
Dumb comment.
Very rude comment.
If I did that kind of work I wouldn't want the world to say that's for sure
"To me it's a no brainer to use this stuff"
Right Chad... only those with no brain would use plastic chrome on an antique car. It's just so fitting for the period and patina of the car. 🤣
Yup. No one painted white walls on with a brush back in the day either or taped up leaking exhaust or bondoed the shit out of their hotrod before rolling on some housepaint.
They would have used bad chad chrome if they had it.
@@vnvracer1384 now you are hating on Queen Jolene with the white walls being painted just to mock up a car. You probably don’t know what mock up means. But hating on Queen Jolene really shows just how much freaking class you have. 🤬🤬🤬🤬
Gearswapper & Hanyes Davis #1 and 2 stalkers, keep up the good work fellers! 😉✌️
Scary. Force threading or cross threading nuts and bolts. I don't trust any of his mechanical work after watching this
Great headlights you can now bang the engine skirts against them when you want to open the hood! Genius
Jolene If I may say,,,, I been watching you guys for some years now, Something I don't understand is why Chad is not properly prepared for the videoing that you do as he has many times runs out of material, screws, bolts, etc and he doesn't seem to make sure that things will go back together without an issue, before you put the video on for the day, Chad spends a lot of time looking for things, to me he just not properly organised can you teach him ????
Listen r this your schooled u edit and produce he needs to be educated he's a grown man
Chad is set in his ways, old dog & new tricks, there is no use in trying to control him, just take what you like & throw away the rest, & keep quiet in the back row, stop complaining, & just be thankful to be invited in to watch the show…🤫
@@ThomasHoltje Talk about someone needing to be schooled with grammar like that. 🤣
It's all content. Time is income.
Correct . How many times in the last video did he go outside to spray the headlight's , I gave up counting after 18 journey's . Why not take them all out , spray them and , bring them back in 2 at a time ? As you say no forward planning before starting the video i.e. , have everything to hand .
Hey Chad, Beavis & Butthead want their laugh back.
Henry Ford wants to know what he ever did to you😂
No he doesn't. Henry died you knowb.
🤣🤣🤣
Edsel Ford, Henry retired by the time this car was made.
He works on cars surely he should know the nut won’t fit is he losing the plot altogether
It’s just a nut, not the end of the world…🔩
Like to see Nates face now
Why didn't he put on '36 Ford headlights? Would look better.
Sad to watch someone with little mechanical skills screw up a sample job, Sad
Sample or Simple?
I had a long rant about your show but I deleted it. It all boiled down to WTF has happened to your show? I've watch you for years.... I'll watch you today.... but damn man....!
Look forward to your son working with you, but I think he should think twice.
HE IS NOT GOING THERE TO LEARN I DONT THINK
Chads already warning what’s going to happen. I guess the drama will be good for clicks.
@@gerrycomfort7027 What makes you say that?
@@chrisdaysford7954son is not that great
Think Chad need to make a lot of changes how to treat people family and friends, he already been stuffing up with that.
Dude. Take some basic mechanics class at the community College. If a nut does not fit because it is the wrong thread or stripped you don't just hammer it on. Replace the bolt or get a tap and die set. Or a chaser set. It is micky mouse to the extreme.
He is always in a hurry and does stuff to just get by would never buy anything off of him down the road it will fall apart always halfass
Why would you put the head lights on when you are going to take the front off to install the new motor.
Cus he doesn't have a plan, and needs something to do for content.
Need to fix the roll windows to stop rolling up to high
If someone forget and close door it will brake the glass
That's the problem we all know exactly where you're going with the car😢
Invest in a tap & die set a chase those threads. And you wonder why you get bad comments Look Professional at this.
Why don't you buy him a set
Or at least a wire brush. Instead of cleaning the threads He rolled them with the sandpaper then used an impact to make it worse 😂
try using lubricunt
@@jjfalarka8837why doesn’t he buy his own since he’s the “GOAT” and knows everything
@@leblanckerry4826 because he does not need one like you need. That is the awesomeness about Chad and Jolene. They can make things cheap and they are millionaires.
You actually think you have a clue
dont know why im commenting on this...cant help it.... what a gong show
"The Gong Show is known for its absurdist humor and style, with the actual competition secondary to the often outlandish acts presented; a small cash prize has typically been awarded to each show's winner. Each show presented a competition of amateur performers of often dubious talent, with a panel of three celebrity judges."
@NYPatternMaker The first line of your comment says it all!!!
You have got to be kidding.
Renamed: Chad's "Bad" Customs!
Can we see your buikds?
Unfortunately, you can't post photos on here. Believe me I would.
Featuring Bad Flexible Chrome Chad!
No Chad it's not an exciting day today.
He fucked that one up...
It will be alright, Chad isn’t building granite megalithic structures to withstand the cataclysms, simmer down & remain calm, none of these cars will be around in a 1,000 years?…🤫
Yep that's a good technical term! 🤣
He always have to use a grinder
It's a pantomime with the easiest of tasks 😂 every job is botched.
Looks like you're going to have problems aiming the headlights.
Is Jolene your daugther or granddaugther?
Work fast & make shit ....Poor Chad, he's not the most thawed pogo in the box.
Have you ever heard.....Work Smarter, Not Harder ?????
Did you ever hear of dry running something first to see if it will go on
If it were me, I would go find me a small block Ford motor like a 289/302 but no Mr. Know-It-All Chad gets the first one he comes up with, a GM. What a brilliant move!
There’s a reason why the 265 wasn’t around long. They sucked I as there and seen it live.
>302.... Cleveland or Windsor?
>Know-It-All Chad.... Like as if Chad and his new buddies are going to swap out the engines and get that drivetrain working over the weekend. 🤣
@ You talking 351 w or c
@@michaelmccabe2647 SOMEONE GAVE HIM THE ALLEGED BRAND NEW 265 HE IS A PENNY PINCHER ASK ABOUT HIS PAINT BOOTH FAN THATS BEEN BROKEN FOR YEARS AND YEARS
And what is wrong with a SBC? Are you one of those who cannot accept a Ford in a Ford?
youtube needs a new show, undoing sad Chads crap builds
Henry Ford was a 24 thread guy. Everything was 24 thread in most cases especially the 30's
What happened to don’t fit, don’t force basic mechanics 🧰
U could read Fina’s face! Embarrassed of the push-ups! She was like come on Jolene!
Fina does a full push-up
Dogs aren't embarrassed.
They are dogs.
@@vnvracer1384 Not only do you not understand dogs but , you most certainly do not understand people . Everyone here knows this about you .
You think he controls, abuses and criticizes Jolene. Wait till you see him supervise his son!! 😢
Terrible comment!
Correct though. I remember
And the reason being is…look at that bad boy would ya…take what you want, and throw away the rest…that’s quite something else
Sounds great, now all you need is a barn full of project cars & a dedicated partner & 350,000 subscribers!…🤫
And repeat several times
@@derangedhermit2879 what on earth are you on about?
If ya know what I’m sayin
several times lol
Never enough time to do it right but plenty of time to do it wrong.
Can we view some of your builds?
@@vnvracer1384 Can you lemmings come up with any new lines?
@NYPatternMaker truth ......
Why throw tools on the floor all work on the floor with a lot of metal that you have? You can’t build a table to be more organized my God.
Of course, it would not be a Bad Chad build without plastic chrome 🤣
That door edge plastic looks good for now. But give it a few weeks exposure and it will fog up. See it all the time.
buy some pants that fit. cuffs went out in the 60s
Not for Chad
He did that because it was cool in Australia
Now your the fashion police?…🤣
What do you wear? Let me guess, skinny jeans? 😉✌️
He looks like Jethro but not as smart
When Boeing makes mistakes, do the engineers do push-ups?
That would be a no
It's stuff up Chad at it again rush rush rush is the way to get things done right😂
Its his way.
When does Chuck Barris show up to this Gong Show?
George Barris?
Never. He died you know.
RIP
Dumb comment.
Isn't this the kind of stuff you're supposed to do when nobody's looking😊
I'm sure no one is looking at you.
Even rat rodders appreciate the Ford flat head V8s, and you're going to replace it with that '55-'56 Chevrolet's 265 CI engne?
Doooooosh move for sure
Chad's wrenching it. Nothing gets done today! This guy would screw up a junk yard and that's hard to do! Took an hour to mount two headlights half azz. Jeez🥴
Haha.. Chad is strugging without the old crew..
See you tomorrow, same bat time, same bat channel! 🦇
@@plumbkrazy810 I think your right here 100%
@@derangedhermit2879 Same chad time , same chad channel .
Slow down James … you started to forget how to speak towards the end of your post 😂😂😂.
This is too painful to watch.
The Chevy Head light looks like poop on the Ford why would you do a Ford that Way I think it's time for me to stop watching you
Don't know what the intended end result is supposed to be but it's certainly not for show.
Chad you won’t learn anything by comments patting you on the back. The viewer that are telling or giving suggestions are the comment you need to read (even negative comments are good comments)
He does not read comments Jolene does what he does is just watch his magazines of cars when he takes a dump. That’s what he said.
@brett- You're comment is 100% true and needed, but yet we are still here, Chad driving 90 MPh down a dead end street with no headlights.
The only thing dull in the workshop is chad
Your really looking dump now thought all the years been doing this work you would improve your skills, but lately you been showing how bad worse you getting rushing things stuffing up so much.
He doesn't have enough brains to put that motor in there he's going to end up fkn that all up headlights look like crap
Do not drive that car, it will fall apart., everything is mounted the wrong way. Bad chat bad job.
A video on what not to do peoples