ultimate guide to creating lenticular covers| DIY| Part 1 | AUDIO IN ENGLISH
Вставка
- Опубліковано 5 жов 2024
- In this video I show you how to correctly calibrate your printer to make covers and lenticular photographs
Grupo de facebook
/ 698569867766836
#lenticular
#lenticularArt
#diy
#lenticularimage
#leticularCovers
#3dMasterKit
Nice video! I'm trying to do something like this and have 5x7 50lpi sheets...I want to do two images per sheet and was wondering how i go about getting the proper size with length and number of stripes...
Please help! :)
Everything is configured in Photoshop, there you must place the measurements you want but you must always leave a border so that you can place some guides, I would recommend that you create a document the size of your sheet and from there you place your two images and adjust it to that enter that document and when you print it you will not have problems
A few questions: Can you use a laser printer, where do you get your lenticular sheets?
Hello, I am working on a school assignment involving lenticular frame that is 4 inches by 15 and have 90 lpi. What would you recommend for the line size? Also if you have any tips on how to see either all black or white during the pitch test because they all look the same to me. I'd really appreciate hearing how you would approach this.
It depends a lot on what printer you have, and for those who are starting out it is recommended to use a sheet that is easy to calibrate, for example the 50 lpi one is good to start with, since those with higher lpi become more difficult
nice useful video.
For image printing, is there a specific patterns for small pictures like size of 2 inch by 1.3 inch?
It will depend on the lenticular plastic, for small images a 75 lpi lenticular sheet is required to have a good resolution, but if you are starting this sheet is complicated to calibrate, for which I recommend 50 lpi sheets for those who are starting, and you need to calibrate your printer, it is mandatory, with that calibration you can make images of any size
@@hazloquepiensas16 can i do this prints for big photo frames like A4 images of something similar ?
@@bendover-bz4bc Hello, yes it is possible, as long as your printer can print at that size or larger, for example, a tabloid size or larger, but that will depend on the printer.
MUY BUEN VIDEO LOS FELICITO
Muchas gracias👍
Sir pls tell photographic paper of how many gsm
hola! excelente video, pero si tengo una hoja de 75 lpi que valores debo cambiar? aun no logro dar con la calibración. help!
Hola muchas gracias, si tiene una lámina de 75 Lpi el valor que cambiarías sería la primera donde yo había colocado 50, y de ahí sigues todos los pasos, solo que es más complicado la lámina de 75 Lpi, deves tener ya algo de experiencia para poder buscarle la calibración por que ahí tienes que saber configurar tu impresora y obtener la calibración, por eso yo recomiendo láminas de 50 Lpi para los que están iniciando ya más adelante cuando ya tengan más experiencia pueden pasarse a la de 75 y así les será más fácil
@@hazloquepiensas16 Muchas gracias por responder, la verdad es que si, es bastante difícil, he seguido el video al pie de la letra y aun no puedo. solo tengo láminas de 75 lpi, intentare conseguir laminas de 50 lpi, aquí en Chile es mas difícil conseguir. Gracias, nuevamente.
What software do we need, Photoshop is enough
WOW newly subs here
Hey bro, I have question and really hope you can help answer it. If specification of my printer only 600dpi (maximum), am I still able to do all of this? Please answer 🙏
Because in the video you said your printer is 720dpi so you set resolution picth test depends on your computer specifications. How about the printer dpi is 600? Still can?
Can you do this on STICKERS instead?? I would appreciate it 🤌
Would work only on firm stickers and not on flexible thin stickers
Hi, yes it can be done
min 5:00 why is paper size letter? at the begining you show a4 paper?
Hola buen dia Amigo , disculpa donde compraste la hoja adhesiva doble cara trasparente ?
si es de mexico en la pagina de sublicenter los puedes conseguir
Is this the lenticular printing technique? What metrics should be used for 200 LPI?
It is the same as the entire video, only that you must substitute 50 LPI that the 3dmasterkit program places and everything else is the same
Same for 100lpi?
When I save from 3DMasterKit the program closes and does not save
This might seem like a dumb question, but why did you divide your printers resolution by 2 to get 720?
I do it because the maximum resolution that my printer prints is 1440, we look for that in the printer specification, and having that number I can print it at that resolution but the photoshop file will be very large and will consume more RAM memory and that makes it Slow down the computer and don't let us work well, that's why I divide it in half or 4 times, the less resolution our computer works, the more fluid it is. Unless you have a good computer you can put the maximum on it and you will have a better result
Oo I see I have a laptop so I definitely have to divide in 2 thanks for elaborating
Do you sell 3D stickers ?
Hello, we do not sell since it is more expensive to ship
Hello, please can you send the links to buy the papers please? Thanks
You can get them by aliexpress with the name of Lenticular sheet and double-sided adhesive, the paper on which it is printed is photographic paper
how if 3 image
Do you know how to do three images?
Yes, I have some videos where I show it, it's the same as making 2 images, you just have to generate a 3-line file in the test, here I have this video, it's in Spanish but you can follow the steps and you'll see that it's the same as one of 2 images will only make a change in the 3d master kit program
ua-cam.com/video/2JCeZCngieE/v-deo.html
title of the Beat Background?
Hello, it's a rhythm that I created for the video
Need part 2
Today or tomorrow I will upload part 2
Where you get the lenticular sheets?
In Mexico they are available through Mercado libre, or pages such as sublicenter but if it is from another country, you could buy it on pages such as aliexpress or alibaba only that they can take longer in shipments depending on the country.
is there an alternative instead of photoshop?
You can use any design program, as long as you follow the principles and print with the parameters of your printer. corel draw is an alternative
qua pke
I'm on a Mac, any advise for a software like 3D MasterKit ?
have you tried with grape 4.3
www.pop3dart.com/grape-interlacing-software