hey bro congrats you are the only one person on which video i commenting in my youtube history because your video is quite helpfull for me thanks bro keep it up
If you are connected on a computer there is a command you can run in the command prompt and it will show you the information, I'll find a video for it if you're still having trouble mate
i've heard about the reset thing, but ive been scared to do it... do i need to re-enter the wifi password on every device again? and do i also lose other important stuff? or is it just resetting passwords?
No need to be afraid m8. It just reset your wifi password and disconnect all the ppl who's connected on the router. Just ask them to connect again after resetting it.
I have typed admin as username and admin as password but it didn't work. That's what sticker on the router says. Is the router registered to its owner who pays ADSL bill every month?
Thank you for your help . . . about to pull my hair out trying to set up a security camera that WOULD NOT allow me to bypass my router's name and password. You gave me THE clue that got it all working. Thanks . . . much.
i am with sky, and i need to login into the panel, but i tried admin admin, but wasnt surprised with the answer as our router has been changed. There is no note of the new password, and when i reset, it still wont work with admin. help.
Is resetting the router the same as turning it off ? In my house I have like other routers that are connected to the main one, will it affect the set up ?
does this reseting affect somehow my operator who delivers me the internet and is it possible to actually not gain any access to the router and just fick shyt up and then call the operators to fix things up
Try looking at the bottom of your modem which is the one next or connected to your computer and under it will be a sticker falling you the password and the username
Please help I'm using mifi Vodafone router , since I reseted my phone , I can't access to the home page.I tried using "admin " still I can't log in and it does not have a reset button.
hello ya so i reseted my router and i cant get the password i did the admin and set the new password and then the wifi stoped cause of the rest and now it didnt apply and i rested it again and it is not the default one can u help?
Some routers are difficult to gain access a second time. The thing is when you gain access, My advice is don't log out until your sure and fully finished.
Yea I logged in once when get the internet bc I had to set it up but now ive tried everything to log back in and I'm scared to reset my router bc what if I can log back in still and can't activat my router
I just connect my laptop at my carehome xfinity router using lan cable. It only show connected to ethernet. Im just stuck to login site. Is there any other way to know the pass?
That is up to you, there are defaults like I mention in the video that work a a lot of devices, but other than that..its a sticker on the router or you will need to call whoever has installed or owns the device
3 роки тому
I have unity media thing and when I enter the settings password it says incorrect because I just need to enter the password
the problem for me is that I don't know my username and my password and also when I use Username: admin and Password: password It just doesn't works for me
i have tried to get into my router with using the 192.168. online, but I have changed password and forgot it, how do I reset my password, any help would be great. thanks.
boss i initally changed my router network name but i never changed my passward but after days i try to log again in my router but failed as it say wrong passward but at first i used admin as login and passward but now failed even if i use my passward so can u help
Im just tryin to play minecraft with my friends
lol same
Me too
Me fortnite
Same
Same here 😂
hey bro congrats you are the only one person on which video i commenting in my youtube history because your video is quite helpfull for me thanks bro keep it up
Eight years later, I came across the video to help. Thank you.
tried eveything the best way i think was just to reset my router. installed new code,s for login.Thanks for the info
Thanks bro, that would really help me. I'm proud of you. Sorry If my english too bad
You're easier to understand than many native English speakers, haha.
Your english is perfect man
Thank you this was to the point, concise, yet thorough with a smooth click path/track. It helped me with my project.
Hi, I keep getting the message, "this site can't be reached".
Mine says the same thing, driving me crazy.... Trying to set up Google Chromecast and need to change a setting in it to get it working
If you are running windows, click on the hyperlink on the webpage that says "advanced". Then press proceed.
i don't have the advanced button
Same
did u manage to fix it cause im having the same problem
Thank you so much!
Your video was very helpful - I was able to access my router menu without a problem.
Keep up the great work !
Thanks alot, video is still helpful even in 2021💯 (if you are in Jamaica and you have a Digicel router, all info is on the router)
My problem is that I changed my WiFi's password but I forgot it ...so where can I find it ?
If you are connected on a computer there is a command you can run in the command prompt and it will show you the information, I'll find a video for it if you're still having trouble mate
Another outstanding and informative video Gilles. I have learned so much from you. Thanks
i've heard about the reset thing, but ive been scared to do it... do i need to re-enter the wifi password on every device again? and do i also lose other important stuff? or is it just resetting passwords?
No need to be afraid m8. It just reset your wifi password and disconnect all the ppl who's connected on the router. Just ask them to connect again after resetting it.
I have lost management access to my airmax device when i changed its settings to run as router. What should i do to access the device?
thanks gave me the idea to look at my router (had the password there). thanks so much
awsm thankuu ...this method was working...
I reset my router and it goes back to factory settings and a 5min later it goes back to old password that i dont know
Have Spectrum and for some reason i'm only able to see the information but not be able to get to the login page for the router settings.
Same
I have typed admin as username and admin as password but it didn't work. That's what sticker on the router says. Is the router registered to its owner who pays ADSL bill every month?
Thanks for sharing your knowledge well appreciated
What if someone changed (router password) it and forgot it...
Thank you for your help . . . about to pull my hair out trying to set up a security camera that WOULD NOT allow me to bypass my router's name and password. You gave me THE clue that got it all working. Thanks . . . much.
thank you so much sir your video WAS VERY HELPFUL 🤩🤩🤩
Very well done! Thank you. Success!!
i got a question would it slow down if there is multiple computers connected to it
I reset my router already. But admin and admin or admin and no password is not working for me.
Please help?
can all this be done wireless or it has to be cabled, thank u
I tried following your instruction, but I still cannot config my router. Do have any other way to solve this problem?
i am with sky, and i need to login into the panel, but i tried admin admin, but wasnt surprised with the answer as our router has been changed. There is no note of the new password, and when i reset, it still wont work with admin. help.
try as the User: Admin and Password: password
I type it in and it says connection not secure, you should not enter in sensitive information on this site because it can be stolen by attackers. ?
Same for me!😫
THIS VIDEO HELP BC MY BROTHERS NEVER CHANGED THE ROUTER but they will do in future bc i have bad router
im watching this because the wifi was recently slow and im checking if the neighbours are using the internet
Is resetting the router the same as turning it off ? In my house I have like other routers that are connected to the main one, will it affect the set up ?
On most routers to factory reset the router there is a little hole you can put a paper clip in for about 10-30 seconds
Thanks for ths video. ..
I couldn't access through my phone, is there a way can access through my phone?
thanks it was helpful also why u leaked you're ip?
IP is not private for anyone and does not matter at all
does this reseting affect somehow my operator who delivers me the internet and is it possible to actually not gain any access to the router and just fick shyt up and then call the operators to fix things up
Thank you I use too get 10mps now I'm getting upto 60mps
thank you so much sir its very helpfull
admin for pass and username arent working for me :( any tip?
Try looking at the bottom of your modem which is the one next or connected to your computer and under it will be a sticker falling you the password and the username
try admin as user and password as password if not leave the password field empty and try log in
@@alexandrupetrean5886 thank you this worked
Does our computer needs to be plug to the router?
Thank you soo much it's working
7 years❤
THANK YOU!! TOU BEATYFUL MAN...omg finally...I couldn't find the username and the pssswors to enter the router settings. AGAIN THANK YOU A LOT!
Mihai-Alexandru Subțire how did you find the password and username????i cant find it
can you help me my router is the same as yours but when i put it in windows doesent whoe me the router login help!
Is there a way to get the S/N? Mine is cleared and y can't find it
Please help I'm using mifi Vodafone router , since I reseted my phone , I can't access to the home page.I tried using "admin " still I can't log in and it does not have a reset button.
when i try to go into the login page it says that the connection is not private and attackers might try to steal info. what should i do?
thanks man, this video really helps alot!
I'm just trying to fix my 15mb package lag issue and auto off mode and limit connectivity.
Which is exactly my router IP address and why it says connection refused? Thank you
thanks bro it really helped🤩🤩🤩💓💓
Thanks trying to make my wireless faster
It was really usefull thank you! ❤
hello ya so i reseted my router and i cant get the password i did the admin and set the new password and then the wifi stoped cause of the rest and now it didnt apply and i rested it again and it is not the default one can u help?
thanks for the info mate .... worked just fine ...
Some routers are difficult to gain access a second time. The thing is when you gain access, My advice is don't log out until your sure and fully finished.
how do i get back inn the second time then, am having trouble even getting to the login screen.
Yea I logged in once when get the internet bc I had to set it up but now ive tried everything to log back in and I'm scared to reset my router bc what if I can log back in still and can't activat my router
How to access the page of a router even if it has been disabled by router's firewall?
can you try to run windows on a router
i restarted it and i can't find the default username and password please help
I am trying to do it on Cox with no luck. Does anyone know how to do it?
I just connect my laptop at my carehome xfinity router using lan cable. It only show connected to ethernet. Im just stuck to login site. Is there any other way to know the pass?
What is the label beside the username and password on the sticker of the router
ive tried all of this and i still cant get into the ting help
thanks, it was helpful, but even after I reset my retour... I still can't log in to it with the default username and pass
Broo that's what I'm scared of rn
TNX BRO U SVE MY LIFE
I need to change my router from 2.4Ghz to 5Ghz
very helpful information... thanks man
but how do you find the username and password? is it my SSID, etc where do you locate it?
That is up to you, there are defaults like I mention in the video that work a a lot of devices, but other than that..its a sticker on the router or you will need to call whoever has installed or owns the device
I have unity media thing and when I enter the settings password it says incorrect because I just need to enter the password
My cable operator is kinda rude. He often changes the password himself and dont give access.
what shd i do,if my connection to this site is not private?
i know this is old but click add exeption
Thank you Bro you give me a way to connect to the university wifi
mine ends with 178.1 and if i type that in i get a trouble shoot page
But what if there is no ipv4 defult gateway, like it didn't show the gateway
Thank you so much brother
I guess we just trying to erase my tacks😂😂
some how when i enter the ip it does a google search and i cannot get in to it
thank you bro
THANK YOU! THANK YOU! THANK YOU!
Can we increase the range of router with this settings menu??
sometimes yes by changing the channel used or frequency range
why is it saying connection blockwd when i try it
the problem for me is that I don't know my username and my password and also when I use Username: admin and Password: password It just doesn't works for me
my router says admin and admin but when i type it in it says incorrect password, anyone know how to fix this
same 😖
My id address is not working, how can I access my router ?
Thanks
i have tried to get into my router with using the 192.168. online, but I have changed password and forgot it, how do I reset my password, any help would be great. thanks.
U have to reset ur router
Bro, i don't know admin username and password but i know the wifi password. Is there any way to acess admin username and password!!
Thank you very much.
Thank You 😊
Say that i have Ralink Router and idk anything ab it even the username and the password of this login page.
How can I get the IP address of my ISP? I have been having a hard time getting it
open command prompt and type "ipconfig" then look for the one that says default gateway that's the IP you need to use
thaaaaaaanks so mutch
you are the best !
My problem is i changed the password and i don't remember it
What do you do if your ip isn't valid url?
thank you for the video im trying to port forward and cant get in thank you for the tips
Thank you sooo much
Is the ssid the info I put into the username
default gateway doesnt work
Reset your router
How to I see can I port forward?
I know this is dumb to ask, i change my user and pass a long time ago then i forgot it , anyway to recover it? I have an Arris Modem
You can reset the modem to its default settings and then reprogram it
boss i initally changed my router network name but i never changed my passward but after days i try to log again in my router but failed as it say wrong passward but at first i used admin as login and passward but now failed even if i use my passward so can u help
Update?