The auto set film guide is a handy tool. That is what the master pressman would have known with his experience. Now you just need a company that believes in keeping good rubber on their machines and giving the time for maintenance.
Exactly, put in 8 sets of westland epmd with loto tec pans 6 months later still running strong with minimal adjustments. The roller assistant is a really good toll in a crunch
Thank you very much. You are a really back bench student in engineering college. 😁😁Your pronunciation is easy to understand for non English speaking country people.
Helpful. Could you make a video to show the best way to adjust the water unit settings and also if possible step by step on the ink rollers. XL 105 if possible. You don't do it every day and the video is helpful when it's time to do it
The diagram and literature that Heidleberg provides on rollers setting is easy to use , yes it's nice to have a video but it does work, if your company can afford it a demonstrator can come in to show you, also Peter any openings in Kennesaw lol
@@SteveMK wow don't think I've seen a gto in 20 years, I started out running a 2c sorzs, here I am now running a 8c xl 106 new gen 2020 with 2 coaters and cold foil 30 years later it amazing how far the printing industry has come, but those older heidelbergs will never stop, I was running a 1956 windmill helping a freind out not to long ago
I have a question, I have a one to two inch stripe across my blanket six to eight inches back from the lead edge of the blanket also I have a one to two inch stripe about six to eight inches back from the tail end of the blanket plate is clean can anyone tell me how to get rid of that never seen it before this is a new problem I have tried different inks and different fountain solutions next I'm going to try different plate material this is just started up this year any suggestions for me to try thank you
Hi sir can you make another more videos about different kinds marks in our printing then how to solve that's problems to machine from roller and dampening thanks
Bonjour. J'ai ma machine speedmaster 74 5 c année 2000 la l'arme de lubrification commence à sonner à partir de la vitesse de 3000 . J'ai changé l'huile,et le filtre. La pompe travaille la lubrification se fait ,la l'arme ne s'arrête pas. pourriez-vous m'enrienter.
Thank you for an informative video, heidelberg has made it so easy , Happy Printing!!
The auto set film guide is a handy tool. That is what the master pressman would have known with his experience. Now you just need a company that believes in keeping good rubber on their machines and giving the time for maintenance.
Exactly, put in 8 sets of westland epmd with loto tec pans 6 months later still running strong with minimal adjustments. The roller assistant is a really good toll in a crunch
I always said.... you're either gonna have scheduled maintenance or unscheduled maintainence. Your call boss
Thank you very much. You are a really back bench student in engineering college. 😁😁Your pronunciation is easy to understand for non English speaking country people.
Helpful. Could you make a video to show the best way to adjust the water unit settings and also if possible step by step on the ink rollers. XL 105 if possible. You don't do it every day and the video is helpful when it's time to do it
The skew setting on the dampeners is a bitch but it works well when you understand it.
Could you show the tips how to setting paper run ?
THAT WAS A WONDERFUL DEMONSTRATION,KINDLY DO ONE ON DAMPENNING SETTINGS SINCE LITHOGRAPHY INVOLVES INK AND WATER AT THE SAME TIME.THANKS AGAIN
I did one on the dampers, Heidelberg USA thought it was too long at over 30 mins. Sorry for that.
Sir i m operating mov from heidelbrg usa and it has inkdock problem can u give me some solution about that
Whats the specific name of that foil at 4:33,(for ordering purposes)?...Thanks
Nice job dear
A good scotsman by the sounds
Yes, you’re correct Jim.
Yes Jim, you’re correct. 🏴
Hope many print engineers watch this and apply to daily operatiom.
I love your content, but I don't know English. Could it have subtitles in Brazilian Portuguese? Thanks.
Please Damping Roll Settings video
yes i want
Amazing question
I made a video on setting dampers, unfortunately Heidelberg USA thought it was too long.
The diagram and literature that Heidleberg provides on rollers setting is easy to use , yes it's nice to have a video but it does work, if your company can afford it a demonstrator can come in to show you, also Peter any openings in Kennesaw lol
How much rubber rollers plate cylinder hadnes . ?
sir tell me about roller setting of sx 52 machine on plates where is the setting bolt please send me the video.
Best person to advice
Thank you my friend.
You didnt mention the recommended width of stripe on plate..
All forms to plate are 4-5 millimeters, except the water form which is 6 millimeters make sure your ink train is set in 1:2
@@Kegga_6 thank you so much. I really appreciate thay
@@SteveMK no problem, may I ask what press your are running
@@Kegga_6 gto 52 single.
@@SteveMK wow don't think I've seen a gto in 20 years, I started out running a 2c sorzs, here I am now running a 8c xl 106 new gen 2020 with 2 coaters and cold foil 30 years later it amazing how far the printing industry has come, but those older heidelbergs will never stop, I was running a 1956 windmill helping a freind out not to long ago
I have a question, I have a one to two inch stripe across my blanket six to eight inches back from the lead edge of the blanket also I have a one to two inch stripe about six to eight inches back from the tail end of the blanket plate is clean can anyone tell me how to get rid of that never seen it before this is a new problem I have tried different inks and different fountain solutions next I'm going to try different plate material this is just started up this year any suggestions for me to try thank you
So is it a waterline? I print folding cartons and I know on dark inks like frosted flakes for example I would get the image of a line across the box.
Hi sir can you make another more videos about different kinds marks in our printing then how to solve that's problems to machine from roller and dampening thanks
Thanks sir. Lessons good.
Describe detail about automatic work
Bonjour.
J'ai ma machine speedmaster 74 5 c année 2000 la l'arme de lubrification commence à sonner à partir de la vitesse de 3000 .
J'ai changé l'huile,et le filtre.
La pompe travaille la lubrification se fait ,la l'arme ne s'arrête pas.
pourriez-vous m'enrienter.
Great video.
Thanks
Wow good job.do you have a job
Rolers bottcher or Westland?
Westland
Any job vacant in your company
i want to talk and help on printing machine
❤
Happy Printing
Lol that press prints with 4 ink forms. Thry took 3 of our i k forms out and i only print with 1 ink form and of course the water form.
👌👌
RYOBI 524 HXX'S CPS MONITOR SYSTEM ABOUT WATER, INK, REGIGTER INSTRUCTIONS
Please job saving video sir.
Ok sir
Nice
mantap price
muito legal! #speedmaster
thanks for your good information sir
WOOOW
Sounds like he has marbles on his mouth
very poor demonstration
Nice