How to Install the Vance & Hines Adventure Hi-Output 450 Exhaust on a Harley-Davidson Pan America
Вставка
- Опубліковано 10 лип 2024
- The @vanceandhines Adventure Hi-Output 450 delivers a strong increase in horsepower and torque vs the Harley-Davidson Pan America's stock Revolution Max exhaust system, while reducing the overall weight of the exhaust by nearly 6 lbs. The new rugged look has a round, stepped-style Hi-Output canister with a brushed finish to enhance the motorcycle's style over the stock black exhaust.
Designed Specifically for the Revolution Max 1250 motor
Cutting-Edge Baffle Design delivering bold rumble while meeting J2825 decibel levels
Stepped 4.5-inch Diameter Slip-on delivers over 5 Horsepower and 5 ft pds Torque
CNC Machined Billet End Cap
Improved Rider Boot Clearance
Compatible with Harley-Davidson Factory Saddlebags and Centerstand
50-State Emissions Compliant
DISCLAIMER: Qualified Manufacturer Declared 50-State Emissions Compliant Replacement Part on Model Year 2021 and Later Harley-Davidson Pan America Models - Авто та транспорт
The center stand springs kicked my ass. As others said, missing a few bits. The foot rest needs to come off and there’s another bolt that needs to come off to get the resonator off. I’d suggest not taking springs off center stand and just take off bolts on pipe side of center stand and see if it loosens everything enough to do the rest in this video. Great video. And as I always say, if I can do it you can too.
Great video! Awesome job capturing the sound!
Very nice I like that this system gets rid of the cat box
That's not the cat box...that's a resonator...the cat is right beside the rear brake.
Video never showed removing the bolt in back of the right side foot control from the resonator box to the frame… must’ve been edited out.
He took the swing stand completely off in other video's they just take the rear brake pedal off to get at that bolt...
Looks great,sounds great.👌
I like it
End of pipe finishes very close to sports panier. Didn't show bolt to be removed behind muffler when removing oem exhaust. Clamp on new pipe to top if upgraded skid plate installed. Can do without centre stand removal. Sounds good.
Does the exhaust tip keep shaking like its really loose?
Awesome job on this video. Thank you.
Why have you got metric and imperial nuts and bolts?
How much gap do you have between midpipe and centerstand? Mine is very close.
i pounded my mid pipe with a hammer wrapped in cloth, slightly dented, but does not rub against center stand arm. went for a ride, and of course it rubbed again. so now i will install titanium header wrap. that should do it!
Have you noticed any "lean-surging" after installing the V&H on your bike? (Surging at cruising speeds with no load) I'm experiencing surging with my PAS after the install; the dealer said it seemed like the problem was related to the pipe install and the bike would need a tune, which the dealer doesn't do.
Are you still having the problem with surging? Are you happy with the new exhaust? I'm considering the change but haven't decided.
@Jerry Williams I've put about another 1000 on it since, and the bike seems to have adjusted to the pipe. After about 100 miles, or so I didn't notice the surging anymore.
I'm very pleased with the pipe. I was concerned it would be too loud, but it ended up just right for me. No annoying drone when cruising for long periods at highway speeds.
Brian, please do another video and address the following issues: 1) The Heat shield on Pan America Special interferes with a clamp. 2) there is a Torx bolt that holds the muffler in place behind the right foot peg, which needs to be removed. You kind of breezed over these extremely frustrating steps. I nearly killed my son as we followed your video.
Does this come with a spark arrestor?
No. That is separate
Has anyone had trouble with the connecting pipe being too big in diameter to tighten up over bike system? My connecting pipe is 63mm internal bike exhaust 55mm external, can’t get any answers to this one?.
We tried to fit one on my sons bike yesterday and had the same problem. It looks like when we took the old system off there is a gasket that stayed inside the pipe of the centre box, I tried to get it out but it broke. We have ordered one online for about £18 and hope it will fix the problem.
@@grahamcole4240 Having the same issue as the bike came with a different aftermarket exhaust fitted, so no orig gasket. Did you manage to resolve and if yes, what part did you order pls?
My son got one from a Harley dealership, it wasn’t expensive.
I just did my bike with a Jekyl Hyde, never uninstalled the center stand. There is a pin with a provided screw next to it which opens the access.
Also he said Torque and then just used a drill ??!!? I hope he is an actor not a mechanic 😮
@@joyleencamiellegreene like you
does this affect my warranty?
NO, Harley redacted a new warranty booklet, got mine in the mail a weeks ago, it states that putting aftermarket parts and accessories does not VOID the warranty, I guess they try to blame the amount of faults and codes and problems on to "that" and wash their hands , but the Consumer Bureau "pulled their ears". LOL
Vance and hines should mention the gaskey that sleeves the stock pipe where the VnH slips on. You will probably not be able to use the old one. I live abroad, so getting a new one takes weeks. I would have loved a heads up.
absolutely no need, just resuse
Must be my phone volume is too low.
Di
Video didn't show removing brake assbly or bolt behind to release resonator box
A lot of unnecessary steps. Just pull the foot peg off. Take out bolt behind peg. Push stand down. Remove exhaust bolts. Take exhaust off on 1 single piece. Not separate
Instead of removing the entire center stand, only undo the screws holding it together to rear set. You have to remove the rear set in order to reach a screw holding the resonator. Undoing the center stand screws from the rear set allow you to get to the screw. Just a tip.
Really missed that bolt behind the brake assembly. If someone is watching this that is guaranteed to cause some frustration. Other than that issue good job!
Sounds better, absolutely. Looks better, NOPE. Doesn’t follow the lines of the bike at all. Akropovic/2BR much more aesthetically correct than this metal “Tervis” cup.
I thought the same until I saw one installed in front of me, looks a lot better than video o photo ….
Missed the critical step of removing resonator bolt, literally the only part youd need instruction on, good wrk vance and hines lol avoid any real help
not required
Its gonna be hard to find a good looks exhaust it’s because of what type of bike it is this bike sounds a lot better but that exhaust is still ugly
so r u
No mention of a Tune being needed ??....Useless !!
dont need a tune ROFLMAOOOOOOOOOOO NOOB