Ghost bond works really well, but ignore the makers instructions. They say use four layers plus a layer of glue on the poly. Use one or two on the head, and one on the base, that’s it. Less is more! And wait 10 minutes for the glue to go tacky before you stick it on.
Thanks for posting this, I was using "Walker Ultra Hold" and having serious reactions to it. I'm hoping that Ghost Bond XL is a better product, and will get me the result I need.
@@H3lloSE It was causing me allergic style reactions. My skin would get super hot, turn bright red, and I was literally forming blisters. I've gotten completely away from it, and never went back. 2 years later now, and I'm super happy with Ghost Bond. It does a great job and it's easy to clean up.
@@H3lloSE I tried to respond but for some reason it blocked my comment. Insane! We live in such a communistic society these days! Can't even talk with someone about hair products without getting filtered. Surreal.
I've had the same exact experience using that ghost bond. It takes a day or 2 or 3 to completely dry and " cure" so to speak, I've noticed. This has made me wonder if I can actually wait an hour or 2 before I place my base on at all. Also I spread a couple very thin layers.
I don’t know i find the other glue sucks too that you showed. It it’s goopy as hell and gets all in the hair and it’s so sticky you can’t get it off your fingers it’s like crazy glue. Never used ghost bond.
Ghostbond XL is great but the edges of the poly show white glue after a shower. Becomes transparent after few minutes in cooler temps. On brown skin that is kind of annoying but way better than the walker terrible smell of acetone.
How did you get a stock Swiss lace from Lord Hair? I have been trying to get them to offer it for months but they don’t seem to get it. Boggles my mind that they don’t offer it. If this glue doesn’t work in the heat I have one more that may be they key.
Thanks it looks great and u I literally get that ghost born aches ale glue wet and it will not come off just don’t rub when you dry your hair pat it with a towel and press at the same time and then as it dries a little bit as you press and pant then you can actually rub a bit thru the hair but not to hard to break the hair and that glue will re-set just in case you ever wanna go swimming or anything like that anyway you’re supposed to use alcohol to remove it I’m new to this goes on XL which is why I’m looking at videos about it and it is so hard to get off my skin maybe I’m just not doing it right which is why I’m looking up videos to help me LOL I haven’t use the other guys board yet so I’m hoping to see if the other ones might be a little easier to get off But from what I’ve learned in watching these other girls videos about the guy spawn you’re supposed to like put it on and then get something to rub it in I think they use little brushes or maybe one of those cotton swabs but I think that that would make a cotton swab kind of shed off and stick to your skin anyways what they do is they put it on their skin they rub it in just a bit or put it where they want it to be and then they use a blow dryer to get the glue tacky so that it’s not dry but it is Close that way when you stick it on your head it drys pretty quickly and then they use a blow dryer on low sometimes if they’re in a hurry to dry it completely or almost completely is driving I’ll get back obviously if you have time you don’t want to do that because a blow dryer can damage your hair which is why you should just use it to dry the glue before you actually put your hair on your head but I’m sure you probably know all this stuff as I said this video is it recent and I’m new to this so you probably know much more than I do but I was just telling you just in case because these are things that I have learned day with watching videos and just want to pass on helpful information but thank you for making this video I am in search for the best way to I’m going to watch her next videos about the other goalie because that is really what I’m looking for you gave me a lot of information about the XL even though I’ve used it before I was still looking for information on it because I was wondering is it supposed to ever dry completely because it always seems a little bit sticky even after it sets Like if I take it off it’s sticky on my skin sticky on my life so watching your video and it taught me that I guess yes it is supposed to remain that way but it’s still very strong I wasn’t sure if it if that was that was supposed to be in if the other glues dry completely or not which is why I’m moving onto your next video thanks
I find to remove glues and tape residue from my scalp that alternating between mineral oil, alcohol, dish soap, baking soda, and even rubbing cotton balls over the sticky parts then using the oil or Vaseline to help emulsify the glue and break it down.
Do you believe a great attachment with the ghost bond and a Swiss lace can be undetectable to the touch? Especially for someone my age (22) where no one would be expecting it.
what kind of hair dye to by if I want to attempt to lighten the bottom of the hairs on the front of a hair piece to make it look better? (it's current ashy brown and I want the bottoms of the hair a shade or 2 lighter so that it blends in with the scalp better). Do I just by blonde hair dye? Waht did you use?
You also need to know that a blonde hair dye, will not turn dark hair blonde. It’s meant for people with shades of blonde already. To get dark hair light, you must bleach it first.
All I know so far is longer than ten minutes and less than 10 hours. There's some kind of chemical reaction going on when its exposed to air or something. Also, I haven't exposed to water yet.
I just remember Ghost Bond to be weak especially during sweating, roll into balls and not able to restick. People who use Ghost Bond mostly recommend Ghost Bond Platinum. I use Davlyn Green now with Poly (too shiny for lace).
Ghost bond works really well, but ignore the makers instructions. They say use four layers plus a layer of glue on the poly. Use one or two on the head, and one on the base, that’s it. Less is more! And wait 10 minutes for the glue to go tacky before you stick it on.
Keep some Toppik fibers when you have an issue where the hair is spotty in some areas.
Thanks for posting this, I was using "Walker Ultra Hold" and having serious reactions to it. I'm hoping that Ghost Bond XL is a better product, and will get me the result I need.
What do u thinks about it? I will stop using ultra is to bad produkt
what reactions were u having ? Itching?
@@H3lloSE It was causing me allergic style reactions. My skin would get super hot, turn bright red, and I was literally forming blisters.
I've gotten completely away from it, and never went back. 2 years later now, and I'm super happy with Ghost Bond. It does a great job and it's easy to clean up.
@@chrispatriot apart from the ghost bond, what tape are you using ?
@@H3lloSE I tried to respond but for some reason it blocked my comment. Insane! We live in such a communistic society these days! Can't even talk with someone about hair products without getting filtered. Surreal.
I've had the same exact experience using that ghost bond. It takes a day or 2 or 3 to completely dry and " cure" so to speak, I've noticed. This has made me wonder if I can actually wait an hour or 2 before I place my base on at all. Also I spread a couple very thin layers.
i love your review 😂 “yank yank yank”
I don’t know i find the other glue sucks too that you showed. It it’s goopy as hell and gets all in the hair and it’s so sticky you can’t get it off your fingers it’s like crazy glue. Never used ghost bond.
What did you use to remove the ghostbond on your scalp when you clean it
Problem is the ultra hold starts to melt. And ghost bond i havent tried proper yet. But i put it on my fingers and its not sticky.
Melts at 25 degrees? That's lower than your body temperature of 37 degrees... So, it's a gooey mess when you apply it after an hour? How can that be?
Looks good, as always
I live in middle east here temperature is around 48 degrees in summer is ghost bond xl works here?
Hey did u end up getting it ?
Ghost bond is the best when following directions
Ghostbond XL is great but the edges of the poly show white glue after a shower. Becomes transparent after few minutes in cooler temps. On brown skin that is kind of annoying but way better than the walker terrible smell of acetone.
How did you get a stock Swiss lace from Lord Hair? I have been trying to get them to offer it for months but they don’t seem to get it. Boggles my mind that they don’t offer it. If this glue doesn’t work in the heat I have one more that may be they key.
Ok mate we got the point…your gonna pull your skin off 😂
where i buy this wig...……...i am from india
If you blow dry the ghost bond it drys very fast
I wonder what the ghost bond xl would do on a lace base system?
I'm making a video about it.
Thanks it looks great and u I literally get that ghost born aches ale glue wet and it will not come off just don’t rub when you dry your hair pat it with a towel and press at the same time and then as it dries a little bit as you press and pant then you can actually rub a bit thru the hair but not to hard to break the hair and that glue will re-set just in case you ever wanna go swimming or anything like that anyway you’re supposed to use alcohol to remove it I’m new to this goes on XL which is why I’m looking at videos about it and it is so hard to get off my skin maybe I’m just not doing it right which is why I’m looking up videos to help me LOL I haven’t use the other guys board yet so I’m hoping to see if the other ones might be a little easier to get off But from what I’ve learned in watching these other girls videos about the guy spawn you’re supposed to like put it on and then get something to rub it in I think they use little brushes or maybe one of those cotton swabs but I think that that would make a cotton swab kind of shed off and stick to your skin anyways what they do is they put it on their skin they rub it in just a bit or put it where they want it to be and then they use a blow dryer to get the glue tacky so that it’s not dry but it is Close that way when you stick it on your head it drys pretty quickly and then they use a blow dryer on low sometimes if they’re in a hurry to dry it completely or almost completely is driving I’ll get back obviously if you have time you don’t want to do that because a blow dryer can damage your hair which is why you should just use it to dry the glue before you actually put your hair on your head but I’m sure you probably know all this stuff as I said this video is it recent and I’m new to this so you probably know much more than I do but I was just telling you just in case because these are things that I have learned day with watching videos and just want to pass on helpful information but thank you for making this video I am in search for the best way to I’m going to watch her next videos about the other goalie because that is really what I’m looking for you gave me a lot of information about the XL even though I’ve used it before I was still looking for information on it because I was wondering is it supposed to ever dry completely because it always seems a little bit sticky even after it sets Like if I take it off it’s sticky on my skin sticky on my life so watching your video and it taught me that I guess yes it is supposed to remain that way but it’s still very strong I wasn’t sure if it if that was that was supposed to be in if the other glues dry completely or not which is why I’m moving onto your next video thanks
I find to remove glues and tape residue from my scalp that alternating between mineral oil, alcohol, dish soap, baking soda, and even rubbing cotton balls over the sticky parts then using the oil or Vaseline to help emulsify the glue and break it down.
Ghost Bond Platinum is supposed to be even stronger!! Try it out to see how you do!
Ok, in the future.
Do you believe a great attachment with the ghost bond and a Swiss lace can be undetectable to the touch? Especially for someone my age (22) where no one would be expecting it.
I'll let you know in an upcoming video when I combine the two.
how long does it take to set initially; until you can go to sleep or go out in public do you think?
I believe that's French lace not Swiss lace. Have you ordered it from their stock units or is it a custom made? They don't have swiss lace in stock.
Oh they do. They sent it to me to review it. I'm making a video about it.
what kind of hair dye to by if I want to attempt to lighten the bottom of the hairs on the front of a hair piece to make it look better? (it's current ashy brown and I want the bottoms of the hair a shade or 2 lighter so that it blends in with the scalp better). Do I just by blonde hair dye? Waht did you use?
Normal bleach dye. I used l'oreal
You need to make sure the company used hair dye. If they used clothing dye, peroxide will do nothing. Otherwise, use blonde hair dye.
You also need to know that a blonde hair dye, will not turn dark hair blonde. It’s meant for people with shades of blonde already. To get dark hair light, you must bleach it first.
How many uses does one tub last ?
What's the name of the shampoo & conditioner you use my man? I need something on the fly that works well
Yes
Can we use ghost bond on a lace system
Yes. But you can't apply it on lace. You have to apply it directly on the scalp
@@williamottone9786
Thanks mate
@@williamottone9786 by the way it's far more expensive than Walker's ultra hold though and how much time does it take to stick?
All I know so far is longer than ten minutes and less than 10 hours. There's some kind of chemical reaction going on when its exposed to air or something. Also, I haven't exposed to water yet.
@@StickOnHair thanks Man you're doing a great job wish you all the best for your channel right from India 😄
How many days will this stronghold will last
I just remember Ghost Bond to be weak especially during sweating, roll into balls and not able to restick. People who use Ghost Bond mostly recommend Ghost Bond Platinum. I use Davlyn Green now with Poly (too shiny for lace).
Yank yank yank 😂😂😂😂😂😂🤣
Ghost bond is a terrible product, my Systems loosens after 1/2 days using this products.
Same. I am switching to walker