NP300 CRG Throttle Body Pipe Upgrade
Вставка
- Опубліковано 24 бер 2022
- In this #shedsessions video, I run through how to fix the np300 throttle body pipe. With heaps of talk about hot pipe leaks, it's also equally important to take care of the plastic throttle body if not more important. If you are thinking about tuning or doing any sort of 4wd'n in your Nav this is a must-have upgrade to put your mind at ease with another weak point in the factory navara's pipework.
Throttle body pipe link - www.crgfab.com.au/crg-custom-...
Thank you to all of my subscribers I appreciate each and every one of you. the drought is over and there will be regular videos rolling out for the rest of 2022.
if you have any questions drop them in the comments below.
❤️ If you enjoy my vids don't forget to Subscribe to the channel.
📢 Share this vid so others can enjoy it - • NP300 CRG Throttle Bod...
My Top Videos For New NP300 owners
/ @jpcaptured799
💬 Join others in the comments section belowwww.
✅ For any inquiries contact me here: jpcaptured@outlook.com
✅ want to see more content!?
Facebook - @jpcapturedd
Instagram - @jp_captured
Disclaimer: This is just some dude on the tracks and in the shed makin vids for others to enjoy I'm not a 4wd professional. - Авто та транспорт
Check out the latest engine mod that we installed into the Nav. It's almost time for an engine tune and a before and after video🙌 enjoy the video legends!
This video helped me in a way you wouldnt have expected. Instead of the sensor coming out of the pipe i found out one of my mates had just unplugged it. Absolute dog act, atleast i watched this before taking it to the stealership.
Right after he said "Give it a good wiggle and that actually comes off pretty easy" I knew this was crap. Did my hot pipe earlier and made a new language with cuss words from these clips so I was prepared for this to be a real pain. I wasn't wrong. Missing skin off my knuckles and started raining. Got there in the end in the rainy and all. Was so glad no codes were thrown or anything blew off. 😅
Tell me about it, my arm looked like I did 6 rounds with a feral cat from the clips on the airbox from my hot pipe install lol
Thanks for the video. This was the hardest s.o.b. to install and I dropped the mounting screw into the Bermuda Triangle and never to be found - just cable tied the sucker down for a bit until I get around the wreckers! Got the Intercooler kit in the garage and thinking probably easier to have done it all at once. Oh well!
Great video mate, perfectly clear instructions! Please keep them coming! Huge inspo to tackle jobs like this on my np300 despite having little experience working on cars!
That's what I'm here for 🤠 thanks for the love brother & good luck with your build 🍻
Thanks JP wouldn't have been able to do it without you. But you made it look so easy😭
Great informative video guys ! That Nav is turning out to be a proper beast!
Thanks for ur helpful videos mate… legend. But mate… that 13mm bolt did my head in . Lol
Just a bunch of handsome rosters doing car things!!
Lachies story time 🤙
Got one of these a while ago but have not installed it yet.
Thanks so much for the video, will have a crack at it very soon.
Perfect timing then ay! That's awesome mate 🤙
Another awesome video, I have ordered my intercooler and hot and cold pipes for my 2022 Warrior after watching your clip on the hot pipe install, I am going to have CRG do the install. Thanks for the great content and keep up the good work mate, looking forward to the next one
You went the whole package like me! You won't regret doing it Tony, it makes a massive difference. The CRG crew are awesome, they will take good care of your rig. Thanks for commenting 🍻
Awesome video mate!
Lovin these vids I’ve got a np300 and am doing a lot of similar mods so I’ve been getting pointers for everything.
Awesome video and information keep it going 😎👍
Thanks mate 😊
Have a look at these legends
Mitchy boy 🤜🤛
Just to add to this you don't have to remove the clip on the air temp sensor plug. Just push it down and remove the plug, less chance of losing it. I had extreme difficultly removing the throttle body even after unseating the retaining clip. I had to use a pry bar from the top of the engine bay and pry back to the top of the throttle body pipe to break the seal.
Hey guys can you do a video on everything you show know about the np300 I just got one a couple months back and I see you know your stuff and I would love like a check list kind of video so I can do a walk around and compare to yours to see if mine is still working in perfect order reason for want this is because my np300 has a few kms on it and is a 2015 model cheers boys I love your channel can't wait to come wheeling with you
Hey mate, with those 2 pin connectors, like the intake sensor one, you dont have to remove the metal clip. You can push it in towards the plug itself
Cheers mate, I found that out after I had filmed it 🤣 probably saves you from loosing them too 👌
@@jpcaptured799 yeeeep, saves them shooting off into space hahaha
Hey mate great video! Do you think it’s worth doing the front mount intercooler if your not getting a tune?
Hey JP. Love all your videos. You sure are great at explaining how to do things.
My question is that I have got a 2021 pro4x from brand new and now 12 months old with 55k on it, is there much difference between your rig and mine? I have had installed a 2" efs lift kit and it's a really good ride! Saving for more mod down the track.
Doing mine right now but I'm also doing silicone hose replacement (plazman) and using Platinum pipes, they seem to have double o rings for each connection.
great video thanks mate - definitely subscribed. I noticed you didn't change the intercooler pipes as well. Not necessary?
had that sensor blow out while i was down at double island, still have it zip tied onto the pipe while im waiting for my new one. after a week of driving it with it zip tied up it’s thrown a red check engine light.
I told you to do this 🤣👍👍
Thanks brother 🍻
I just bought a 2016 np300 and im really 3njoyingyour videos they are brilliant.
What would you recommend be the first mod or where would you start ?
Are you going to do a video on blanking the exhaust to egr cooler pipe?
Have you done a body lift would be interested in that
Hi mate have you fitted or considering fitting a oil catch can kit
Do you have a video on the bottom intercooler pipe?
Hi, donde puedo comprar esas piezas metálicas? para la nissan np300.... thanks
Hi. Do you have the 2.3 or the 2.5 liter engine?
Once again great instructions to follow. 🤙 Hook ur brothers and sisters with discount codes. Thanks 🍻
Whenever I can I do ☺️ cheers mate 🍻
Good one Buddy. I have a question.......
What's the question Mike ?
@@jpcaptured799 It was a play on your Buddies closing statement.....when are more videos coming out? Love your content and upbeat presentation.
Don't you need to clean the air temp sensor with brake cleaner?
You could clean the sensor with sensor cleaner if you wanted too 👍
Wher can i Purchase all this CRG pipes..price range too..?
Whats the cost of that pipe i'm from Tobago
Why doesn't CRG come with the snap ring?
The OEM one is perfectly fine to re use.
How long roughly did this take?
Roughly 2 hours 👍
Do you know if it voids warranty?
Warranty covers manufacturing defects of the vehicle on OEM parts, warranty can't be void for any failure of a Nissan OEM part unless the aftermarket part caused the failure, search nissan warranty terms for the word void, you won't find it, Australian consumer law has it covered.
Hallo
A definite on my to do list, can you assist with an email address of Chris please