Thank you for always saying good things and watching my videos, friend. I think I will be able to drive better when the Gladiator-specific chassis is released. Looking forward to the upcoming chassis. Thank you for having a nice day today. Thank you for having a nice day today.
늘 좋은 말씀과 시청 감사드립니다^^ 구입하시려고 찜해두셨군요^^ 디테일은 정말 좋습니다 얼마후 전용섀시가 출시된다고하니 조금 기다리셨다가 섀시와 같이 구입하시는 것도 좋으실것 같아요. 아직 전용 악세서리들은 출시를 안했지만 아마도 조만간 순차적으로 출시하지 않을까 생각되네요. 감사드시며 오늘도 즐거운 하루되세요!
Thank you for always saying good things and watching my videos, friend. I think this gladiator has really good detail. Thank you for having a nice day today.
Thanks for the nice words and watching my video my friend. I think the details will be better when the exclusive chassis is released. Thank you for having a great day today.
Thanks for watching my video, friend. Sorry, but in order to use the Mercury chassis, I restored the chassis in this video to its original state and used a different body. As a reminder, mounting this gladiator body on the tf2 chassis is not recommended because it requires various processing and front and rear link adjustments. I recommend waiting a little longer and installing it on the Mercury chassis.
Thanks for the kind words and for watching my video friend. It wasn't an exclusive chassis for the Gladiator, so it wasn't easy to match the body and raise it. Several adjustments were needed. Still, I think it will be completed with a more cool look if it is installed on a dedicated chassis that will be released soon. Thank you for having a nice day today.
@@EmotionalRcI just finished my body and ran into the same situation. I was going to use an Element IFS chassis and adjust it to fit the 313mm wheelbase, only to realize that the chassis, along with my other chassis are too big and high for this 1/10(but actually more like 1/12) chassis. RC4WD chassis are expensive for what you get but if that’s the only few that can fit, I might just have to buy one, or if we are lucky, the Mercury chassis can be released soon.
Thanks for the nice words and watching my video my friend. I think the new Gladiator Body from Killer Body has really good details. Thank you for having a great day today.
Thanks for the kind words and watching my video, friend. Hmm... If you want to install this Gladiator body on TF2 (LWB), you have to adjust the rear wheelbase to fit the body. Also, I had to sand the inside of the body grill a little to make it fit better. By sanding the inside of the grill, you can slightly reduce interference with the steering servo. Hope this helps. Thank you for having a great day today.
Дякую, друже, за перегляд відео. Коли шасі rc4wd або кілька шасі піднімають важкий кузов, генерується зворотний крутний момент, а коли тягнуть дросель, він показує нахил вбік. Здається, регулювання натягу пружини амортизатора не вирішує проблему. Думаю, у майбутньому мені доведеться провести додаткові дослідження. Дякую за гарний сьогоднішній день.
Thanks for the kind words and for watching my video, friend. I think the gladiator body is a body with really good details. Thank you for having a nice day today.
Thanks for the always nice words and for watching my videos, friend. I think it will look really cool when mounted on the newly released Gladiator-only chassis. Thank you for having a nice day today.
Thanks for the kind words and for watching my video friend. I think Killer Body Gladiator has really good detail. Thank you for having a nice day today.
Thanks for watching my video friend. The RC cars I own are custom made by purchasing the chassis and body separately. I hope you buy or build a nice vehicle too. Thank you for having a nice day today.
Awesome Build!!!!
Thank you for always saying good things and watching my videos, friend. I think I will be able to drive better when the Gladiator-specific chassis is released. Looking forward to the upcoming chassis. Thank you for having a nice day today. Thank you for having a nice day today.
@@EmotionalRc You're Welcome my Friend 🐼👍🏻
I Didn't know that will be a new chassis for the Gladiator, very naice, Looking forward to see
알리에 찜해 놨더니만 계속 메세지오고!~ 난리네요! 창훈씨 조립영상도 방금 봤는데!~ 아!~ 너무 땡기네요!~ㅎ
그런데 LED는 전용이 아직 출시 안됬나보네요!~
멋진 조립 영상과 주행 잘 봤습니다!~^^
늘 좋은 말씀과 시청 감사드립니다^^ 구입하시려고 찜해두셨군요^^ 디테일은 정말 좋습니다 얼마후 전용섀시가 출시된다고하니 조금 기다리셨다가 섀시와 같이 구입하시는 것도 좋으실것 같아요. 아직 전용 악세서리들은 출시를 안했지만 아마도 조만간 순차적으로 출시하지 않을까 생각되네요. 감사드시며 오늘도 즐거운 하루되세요!
캬~ 흰색만보다가 드디어 도색버전을 보니 오우~
더 실제로 보고 싶어지네요. 노랭이 이쁩니다.❤️🎶😊👍
항상 좋은 말씀과 시청 감사드립니다^^ 다음에 같이 주행하게될때 한번 들고가볼게요^^ 그래도 전용섀시에 올렸을때의 자세가 훨씬 멋질 것 같긴합니다. 옐로우 처음 시도해봤는데 역시 밝은 색상이 이쁜것 같아요 즐거운 주말되시구요!
Emotional Jeep Rubicon 👍🏿👍🏾
Thank you for always saying good things and watching my videos, friend. I think this gladiator has really good detail. Thank you for having a nice day today.
멋진영상 항상 잘보구 있습니다 언제 같이한번 갑시다 ㅎㅎ
매번 시청해주신다니 감사드립니다^^ 네~^^ 여유있으실떄 언제든지 환영합니다^^ 오늘도 즐거운 하루되시구요!
첫 유료광고 축하드립니다!!
도색도 잘 나오고 노랭이 글래디 스케일 주행 멋집니다!
저번에 갔던 장소인가요?
모래가 많아진 것 같기도 하고 ㅎㅎ
감사합니다 여러분들이 도와주신 덕분이죠^^ 몇번안해봤지만빌드영상 정말 쉽지 않더라구요^^ 그래도 마무리할 수 있어서 맘은 편하네요 아! 여긴 거기와 다른 곳입니다^^ 모래가 정말 많죠 발도 푹푹빠지구요^^ 오늘도 즐거운 하루되세요!
Man it’s like putting together the real Jeep!!😮 wow absolutely beautiful!👌🥰👍awesome job and video!
Thanks for watching my video friend. This gladiator body looks really well detailed. Thank you for having a nice day today.
넘 멋지네요. 디테일이 살아있습니다. 저도 갖고 싶네요!!😄👍👍
감사합니다^^ 네 디테일은 지프바디중에 정말 최고인 것 같더라구요 실차처럼 한판한판 나눠놓은 것도 그렇구요 아마 얼마후에 전용섀시가 출시될 예정이니 그때 같이 구입해보시면 만족감이 높으실거라 생각됩니다^^ 오늘도 즐거운 하루되시구요!
바디 구입 고민중인데 도움이 되었습니다. 영상도 잘봤습니다.
시청 감사드립니다. 도움이 되셨다니 다행이네요^^ 이제 정말 글래디 전용섀시 출시가 임박한 것 같습니다 다양한 파츠들도 준비중인 것 같더라구요
Very nice friend
Thanks for the nice words and watching my video my friend. I think the details will be better when the exclusive chassis is released. Thank you for having a great day today.
I just ordered my body and would like to use the tf2 chassis until the mercury chassis is released. Could you post a video on how you mounted it?
Thanks for watching my video, friend. Sorry, but in order to use the Mercury chassis, I restored the chassis in this video to its original state and used a different body. As a reminder, mounting this gladiator body on the tf2 chassis is not recommended because it requires various processing and front and rear link adjustments. I recommend waiting a little longer and installing it on the Mercury chassis.
You picked the right chassis, the track width and tire size are on point. Look very scale. 👍
Thanks for the kind words and for watching my video friend. It wasn't an exclusive chassis for the Gladiator, so it wasn't easy to match the body and raise it. Several adjustments were needed. Still, I think it will be completed with a more cool look if it is installed on a dedicated chassis that will be released soon. Thank you for having a nice day today.
@@EmotionalRc can't wait to see it my friend. 😁
@@EmotionalRcI just finished my body and ran into the same situation. I was going to use an Element IFS chassis and adjust it to fit the 313mm wheelbase, only to realize that the chassis, along with my other chassis are too big and high for this 1/10(but actually more like 1/12) chassis. RC4WD chassis are expensive for what you get but if that’s the only few that can fit, I might just have to buy one, or if we are lucky, the Mercury chassis can be released soon.
잘 봤습니다. 역시나 멋진영상!
좋은 말씀과 시청 감사드립니다^^ 조립영상... 쉽지 않더라구요.. 아마도 전용섀시가 출시되고 거기에 올려야... 자세도 더 좋고 스케일도 훨씬 좋을 것 같아요^^ 오늘도 즐거운 하루되시구요!
Nice body bro, cool jeep running video👍😀
Thanks for the nice words and watching my video my friend. I think the new Gladiator Body from Killer Body has really good details. Thank you for having a great day today.
바디파트들 디테일이 엄청나네요! 313 샷시인데도 길어보이는 느낌입니다. 진짜 차량처럼 퀄리티가 너무 좋네요. 모래밭 위에서 너무 터프해 보입니다👍👍
늘 좋은 말씀과 시청 감사드립니다^^ 네 정식 라이센스를 득해서 그런지 디테일들이 정말 좋더라구요 오픈할 수 있는 것도 많고 적재함의 디테일들도 좋습니다 아마도 얼마후 출시할 전용섀시가 출시되면 자세며 디테일이 더 좋을 것 같아요 감사드리며 즐거운 하루되세요!
His behavior is very realistic, a great adaptation. Are you using the Axial SCX10 III chassis?
Thanks for watching my video, friend. The chassis of this vehicle used the RC4WD chassis. Thank you for having a great day today.
I have an tf2 lwb and am looking into getting the gladiator. How did you mount it? And was there a lot of modifications?
Thank you and love your work!
Thanks for the kind words and watching my video, friend. Hmm... If you want to install this Gladiator body on TF2 (LWB), you have to adjust the rear wheelbase to fit the body. Also, I had to sand the inside of the body grill a little to make it fit better. By sanding the inside of the grill, you can slightly reduce interference with the steering servo. Hope this helps. Thank you for having a great day today.
@@EmotionalRc Thank you!
Крутий бодік,гарне відео,одне не сподобалось,що модель завжди клонить у право,є проблема з підвіскою
Дякую, друже, за перегляд відео. Коли шасі rc4wd або кілька шасі піднімають важкий кузов, генерується зворотний крутний момент, а коли тягнуть дросель, він показує нахил вбік. Здається, регулювання натягу пружини амортизатора не вирішує проблему. Думаю, у майбутньому мені доведеться провести додаткові дослідження. Дякую за гарний сьогоднішній день.
Anyone knows which RTR crawler chassis can fit this body?
Thanks for watching my video, friend. I think Killer Body, the company that made this vehicle, will probably release a dedicated chassis.
So cool!
Thanks for the kind words and for watching my video, friend. I think the gladiator body is a body with really good details. Thank you for having a nice day today.
Superbe ❤
Thanks for the always nice words and for watching my videos, friend. I think it will look really cool when mounted on the newly released Gladiator-only chassis. Thank you for having a nice day today.
조립과정이 대단
난 못할듯 ㅎ
네 조립이 작은나사들이 조금 많아서 그렇지만 그래도 조립할만한 것 같긴해요^^ 아마도 형님이 만드셨으면 더 멋지게 만드셨을껄요?^^
👍
Thank you for watching my video, friend. Have a nice day today.
👍
Thanks for watching my video friend. I think Killer Body Gladiator has really good detail. Thank you for having a nice day today.
WondeR
Thanks for the kind words and for watching my video friend. I think Killer Body Gladiator has really good detail. Thank you for having a nice day today.
Hlo please gave that are please I did not have rc car
Thanks for watching my video friend. The RC cars I own are custom made by purchasing the chassis and body separately. I hope you buy or build a nice vehicle too. Thank you for having a nice day today.