⚠️Speed wobble at ~40mph on Exways Atlas Pro electric skateboard⚠️
Вставка
- Опубліковано 12 лис 2022
- Full video: • Can Exways Atlas Pro r...
#electricskateboard #skateboarding #skate #exway #atlaspro #exwayatlas #exwayatlaspro #fall #fail #skater #electricskateboarding #trick #stunt #shoppingcart
***********************************
Exway Atlas Pro Review Exway Atlas Pro 4wd review Exway Atlas Pro 4x4 Review Exway Atlas Pro 2wd review Exway Atlas Pro Speed Test Exway Atlas Pro Range Test Exway Atlas Pro 4wd Speed Test Exway Atlas Pro 4wd Range Test Exway Atlas Pro Race Electric Skateboard Race Electric Longboard Top Speed Electric Skateboard Top Speed 40mph Electric Skateboard 60mph electric skateboard Exway Atlas Top Speed Exway Atlas Pro Top Speed Exway Atlas Pro 4wd top speed Electric Skateboard Speeding Noblemantech TQ-1 Noblemantech TK02 Nobleman Pads
*********************************** - Розваги
70% weight on front foot, 30% in the back. No more wobble
This is where u have to wonder if he has balls and nerves of steel or if he's doing it cuz its fun as hell... "Mind the big rocks." U got it dude.🤘
It's so much fun it gives you balls of steel
@@klebt3546 I bet it does, adrenaline rush like a mf. Completely awesome.
@@ellymae8482 wait but girls dont really ride eskate though
@@jake9854 there's a rad interview on evolve's podcast channel on YT w/ a pretty cool chick
Man theres just nun like it i got big ol 10 inch tyres and a 72v baterry can get from 0-40kmh in like 3 seconds its not adrenaline you never feel like your in any danger its just freeing and ive wiped out like 4 times your never scared to go again worst concussion ive ever experienced thanks to eskate and we aint done here 😎
i noticed that you started to learn away from the front of your board as the wobbs started to pick up
Bending down isn't necessarily the best way to handle high speed cuz your center of grafity is less controlled due to your legs being bent and not able to make micronadjustments as easily
Noted for next time haha😅
uh, you don't want to lock your knees. it looks like he got wobble because he was too far in the backseat. imagine doing 36 on a forklift, that would be sketchy. when all of your weight is on the back going fast as hell, your turning with your rear wheels. Couple that with most setting up their front truck looser than the rear and that's what happens.
yeah most def and u want at least 70% of your weight all into the front leaving the rear trucks straight as possible. i normally bring my front foot forward a bit on high speed runs just to keep weight off the back. any micro movement in the rear trucks at those speeds no fun . either way its never easy staying perfectly balanced at those speeds with looser bushings. tighter the trucks easier it gets to just cruise at those speeds. my board never feels tight enough unless i sacrifice all my turning radius lol i cap it at 30 mph on 105m street wheels. we need better designed trucks for these speeds.
"grafity"
@@turbotrainer1agree with everything you said. I tighten my front trucks for high speeds being easier to cruise on like you said. We 100% need better designed trucks I agree. How tho, dunno 🤷🏽♂️
nice recovery, been there, got to stay calm :D
The adrenaline rush makes u lock into not falling
Thought we were gonna see you all over the road... Well saved
Good job not over correcting
"it felt like it wasn't my fault" he says as he's putting more weight on the back of the board.
You can clearly see all my weight being applied to the front?
If he's going to ride with those wheels he's going to need the hip, thigh, elbow, and wrist guards also...
And full Face helmet
Really brave going that fast and not wearing any sliding gloves😅
I salvaged 4x hub motors from hoverboard and they top out at 45.5kph with tonnes of regen. No fishtailing. Sometimes it's the vesc thinking one side isn't balanced
Good save man,good save!!
At that speed a crash can be very serious.
Thats when i stop to tighten my trucks
💯 when the speed is crazy always tighten trucks. I learned that landkiting with mountain boards and kiteboarding kites.
It had a problem on the release of the acceleration, you had to decrease slowly. At least that was my experience 💯
I know it's hard on electric but gotta get your weight on that front foot at I speed like all of it
100% this. Ive gotten speed wobbles before and pushed right onto/over my front trucks and it gets controllable. seems counter intuitive to begin with but I swear by it now.
I felt the same a few times. When you hit the speed limit, it feels like one motor can no longer spin faster, and the second is gaining momentum a little more, and the suspension itself starts to turn due to different wheel speeds. And it shakes you straight, at the moment you throw the gas and catch the board. (sorry Google translate)
Scary stuff, I wanna look into these kind of occurrences
I’ve been getting it as well but I think it’s due to slop from the pivot cups, I don’t think it’s to do with the motors
thats what i see in this video feels like 1 motor spins slower. The man is super balance at 35 no way he couldnt do 36.
@@JackHasWifi vesc has traction control maybe that helps?
@@benjaminjames-bryce8354 you cant just say it goes unbalance from 35 to 36 cause of pivot cups not only 1 time but 3 times?
I went this same speed on my meepo voyager today in mode 3!!!!!!!! There's 4 modes. I was able to bend down on my knees and touch the ground at that speed. Man its fun I feel like a little kid again lol.
Sucks so bad boosted board is gone and i never could afford one 😢 thats how i feel seeing this video and the music made it hurt
Speed wobble was probobly your fault or unstable truck setup, but keep your weight over your front foot not the rear
cant blame him no one really gets that to 40mph if somone then video!
I'm myself after 2 crashes on my board , first brakes failed , or I'm 2 fat , second... dried out puddle with some wet mud underneath the dry crust that send me flying at some guys fence, u saved yourself some pain there , keep up the form and be careful 🤘👍
There is so much slop in eboard trucks and with those things hitting higher than pushing speed, form is super important.
best way to avoid speed wobble.. carving
I was going 30 mph down this steep road right next to campus, I had car behind me too. So I just bombed the hill on full throttle. I started getting wobbles really bad and somehow managed to slow down to a point where I regained control. If I had fucked up even a little bit, I prolly would’ve gotten run over.
i think the road caved in from all vehicles. this has happened to me aswell
Yeah, so getting super low like that is mostly for style points, it doesn't help with distributing your weight. That's because getting super low takes away your ability to fine tune your balance. Yes, bending your knees and squatting a bit is helpful, but over exaggerating it isn't easy to maintain control.
no offence bro, but i forgot about this channel, im glad i found it
Dress better for the slide bro 🙏🏾
Dope 👍🏾 that’s my futur board
Glad I'm not the only crazy fuck that goes full speed. Mine goes about the same speed and the same happened to me. I think the wobble is a mix how loose the truck is and the torque of the motor. U get the wobble when u not ready for the decrease in speed after the acceleration with those four sexy motors
Shift weight forwards. May be a wheel issue
Start leening in front when doing your tests. Do not take a neutral stand where you put your weight in the center. That will send you flying. Even riding at 30 or 25 put most of your weight on your front foot. I would advise do it at all times riding even slow just to get used to it.
Speed wobbles are the scariest thing ever,
also wish I had a board, but poor. :(
I honestly buy my boards in payments thru PayPal credit. There’s some fairly priced cheaper boards if you ever wanna invest into the sport/hobby I could recommend
Get the possway t3 good starter board
My board has been ordered so stoked to go fast af
Be careful with speed wobbles😅 if the tires don’t all have the same air pressure, this exact thing can happen
Well I got the hydro I wonder wheels hopefully I can still hit top speeds
uh be careful, nice saved ...
If you're starting to wobble out that means you got to tighten your front trucks down a little bit more than the back trucks always have the front trucks a little bit tighter than the back trucks on a longboard whether to electric or non-electric to eliminate speed wobbles
Nice job pulling out of it fr
Hell yeah great save recovery,
3 links are nice
needs bigger wheels and wheelbase
User error but decent recovery, saw something you were trying to miss or were you compensating for torque?
Be careful with rocks bro I hit one going 35 and my whole frontside was skinned😂
What setting do you have the Atlas Pro on?
Dude chill
What could it have been if not the road bc I see a couple of these videos like speed wobble is it dangerous to ride e boards?
Keep over front truck. Especially at high speed.
🎉🎉🎉 They finaly fixed this issue 🎉🎉🎉 after 5 emails and 2 videos, i sent to the Exway support. So if you want to go fast, u should upgrade firmware on yours atlas pro.
Really??? What was the issue exactly? And any screenshots of what they said exactly? My insta is @jackhaswifi or if you prefer email nollectz@gmail.com
@@JackHasWifi
That's all they wrote to me about solving the problem:
"Sorry to keep you waiting.
Engineers say they have identified the problem and are currently working on a solution. This problem can be solved through program optimization or gear ratio optimization. They still need a little time, and it is expected to be at the end of this month.
Really sorry to cause you trouble."
And as I noticed, the board became really stable at high speed. And now, no sudden twitching of the motors that cause wobbles.
4 electric engines?? It must be steep Hill proof
I also wear motorcycle gloves. Your hands hit first in a crash.
Nice save
Nice man I got a 4wd AP too. Still not sure how I feel about DKPs on a board this fast though I haven’t even gone as fast as you on mine yet and I’ve had wobbles as well. Maybe solid bushings road side? I haven’t tried taking the extra kingpin/pivot thing off yet though.
dkp not really good for speed idk why people keeps pushing that.
@@joaquinninoortega8023 no one’s pushing for it lol we just take what we can get
@@joshww5110 They can make RKP there are tons but problem is you cant find any wide rkp fro AT wheels so i ended up in channel trucks.
@@joaquinninoortega8023 they can but I think they’re trying to appeal to a wider variety by throwing carvy trucks on everything lol. I’m waiting for that guy who makes RKP’s for the hurricane to design up a set for the AP because I’m about to just throw on like 5 inches of riser pads and just take off the second kingpin on the stock DKPs to get more stability lol
Are the speed wobbles in the room with us?
I stay under 25mph lol 😅
Crazy FAST mate you're potentially gonna get nailed by a car or pot hole slow down it's all about the CARVE 🤙
Mannnn mine speed wobbles at 22.
Maybe try tightening your back truck. That's not very fast.
That board seems kinda narrow and not all that dropped
Speed wobble is always your fault it's the way you stand the way you lean on a board which causes it.
True, Altho there was apparently an issue where the motor speeds would desync or something close to the top speed, which they told someone via email they fixed in an update
I’ve fallen hundreds of times. Mostly wheel popping off going downhill carving too hard. It only conditions the bones! No need for gear ;)
and your head?
@@ShadrikEastonif anything only thing that’s taken a toll from all my falls never wearing a helmet it’s my back or arms. I guess I’m a expert faller. Always fell on arms or back. I always know if I can’t stay in feet 100% or not I’ve ate shit but it’s been the funnest thing every time cause I never break bones and now all my bones are so conditioned I can bounce off concrete walls with my hips for arms shins and I’m only 28.
was going 35 on an ecomobl et aand ran over a freakin pothole, flew into the air and almost died... always use a helmet and tighten ur trucks😂
Can’t believe you guys are doing such speeds with such thin plank under your feet toes and heels hanging off both sides. Of course you’re gonna get wobbles.
lean forward
If you crank down your front truck a little bit more make sure it's tighter than the back one you won't have speed wobbles
I ate sh*t doing 45kph on my atlas a while back.. you're def better at cancling out them wobbles 😂😂
Fuck over 20 ima die if i fall any faster
Evolve?
what is the protection you are using???
Noblemantech gear! Their TQ-1 Pads
Bro I casually go 45 on my zealot board np 40 ain’t anything
Mph
Bad stance, too low, bad weight repartition.
Weight should be in majority in the front, keeps the front end steering and the rear end trailing
My weight was in the front lol
Where did you get those knee pads from???
Noblemantech, they’re called TQ-1 and are pads for both elbows and legs. Use my discount code JACKHW if you get any!😂😂
are you driving your board in reverse or is it that way. whst board?
Exway atlas pro, it’s a 4wd with motors on both sides
howww much
Exway's imo are worse with speed wobbles. I have used a Backfire Zealot & Zealot and when I got on the Exway Flex ER speed wobbles above 25. I suggest not getting Exways
I definitely don’t get speed wobbles with anything under 34, and a lot of my boards are exway lol. I’ve use Wowgo, Miles, Vokboard, and some others and honestly exway and Wowgo have been the best for me. I think what happened here was my unbalanced pneumatics. Switching over the MADWHEELS or airless soon
You're leaning tho ok
Stop standing on your toes
I wish I could do the same and even feel some speed wobbles but exway took 47 days to deliver my FLEXPRO, with a broken GaN charger. After all these delays and problems they won't ship the replacement charger until the 29th of Jan the absolute soonest. I emailed them to make sure they were in Stock in California before they I ordered to avoid this and it's going to take a total of 77 days to get a working skateboard from this piece of s*** company. FUCK EXWAY
Crazy 😝
Get some wrist guards too Jack, if you’re going to ride at these speeds. You’ll instinctively try to break your fall with your hands. Your wrists are not built for that kind of impact, and take months to recover.
You’re right, I’m not sure why I neglected them this time
He's woke
Curious; what's the benefit of belt versus gear? Or am I confused 😕 😂
Gear drive I’d honestly currently maybe advise against, as it’s very limiting in what pulleys (and wheels) you can use with it. It gives way more torque, so it’d be perfect for off roading and possibly racing. Exways gear drive currently only supports its pneumatics. Belt on the other hand supports pretty much any pulley and any wheel
@@JackHasWifi I appreciate the response.
Should one carry spare belts at all times, or are belts expected to last a long time under heavy use?
Belts aren’t very prone to breaking. I’m actually yet to break one myself, Altho a friend of mine snapped his cause rocks kept getting caught inside it. Most boards have belt covers and less exposed entry points so this should be quite rare. But having at least a couple backups won’t hurt. You can get them pretty cheap and reliably from Vbeltguys. They’ll have any size you need haha
@@JackHasWifi Thanks much! The video and your responses are very appreciated!
Noob
Holding a selfie stick doesn't help with speed wobbles
Or maybe it saved me👀
Yeah def not your fault lol
I was just going buy one thank u artificial intelligence put videos? Awesome videotaping? Debating somewhere in the mountains? Gary quadcopter dirt 8K now ? Get the follow mini quadcopters hundred Hill circle You video
Maybe try to drive the board backwards, could be that front and rear motors aren't coordinated
Freaks!
ALL TERRAIN wheels aren't built for speed.
I wouldn’t say these are all terrain just cause they’re pneumatic. Exway sells actual all terrain wheels. These are more of general purpose wheels
@@JackHasWifi no, they are All Terrain. Street wheels don't have air. Be honest, don't lie about your WiFi password.
Oooooh. You’re just after free wifi😠
@@JackHasWifi LMAO hahaha