If you shorten the rear links on a ar45 for what ever reason, a link riser is necessary to keep the links from rubbing the axle mounts. It also makes it look awesome.
One thought on cutting up of the body…Milner’s yellow hot rod in American Graffiti, no front fenders and a very small shortened rear fenders. An homage to a great car movie. Even though you just mentioned as I was typing that no rear fenders will make it
Have the same chasis with element straight axles and the same trans and a 3532 out runner with rhino 80amp its really good and extremely light weight. Running battery on soa. The little weights all low enough that its extremely well balanced.
Gonna be an interestin Chicken Coupe. Being a wide mullet I fell it could end up as The Koi Car.. but as with most mix n match custom builds using parts wombled from various things it might end up naming itself after the first few test runs.
That is the best geometry I have seen. Will be curious if there is a quantative diff than others on rocks Hodge Rod Would love to either on rovers or extremely skinny 1.9 front and 2.2 rear tires
also, the CVDs must cost more than a plain axle shaft which you would think woud increase cost. You can install some spacers to lift that spring cup up for more clearance. Or, oooo, offset rod ends for Dravs/fake Dravs/2660s.
I was going to build just a normal thing to run my Panther Cougars on, but now that I think about it, I probably should replicate this idea, right? Mullet + Cougars might be the best it can get. Not with Element axles tho, too expensive for me Its going to look goooood, its a shame you dont want to do a flame design, with whatever colors instead of orange/red/yellow Bigger tire sounds good to me
This is a mullet (straight axle front, portal rear) so if the 2Low was in the "normal" configuration, I'd have 82% rear underdrive. Which is not desirable.
I think you should router a groove across the front of your desk, to catch the rolling screws and pins before they hit the floor.
I was going to do something with that body too! Looking forward to seeing that project on the rocks. 👍🏻
With that body how could you not call it the Eliminator after ZZ tops famous car?
During the live stream yesterday, each time you spoke, 'Gary Meusy', I giggled to myself. LOL.
Awe man, I woulda never thought of using a 32 ford body! Let’s go!
If you shorten the rear links on a ar45 for what ever reason, a link riser is necessary to keep the links from rubbing the axle mounts. It also makes it look awesome.
Evening!
Howdy
If da front is wider than da rear, ya get da front between a gate rear will follow 💯
I have a sneaking feeling that this is the next body for my crawler
One thought on cutting up of the body…Milner’s yellow hot rod in American Graffiti, no front fenders and a very small shortened rear fenders. An homage to a great car movie. Even though you just mentioned as I was typing that no rear fenders will make it
Have the same chasis with element straight axles and the same trans and a 3532 out runner with rhino 80amp its really good and extremely light weight. Running battery on soa. The little weights all low enough that its extremely well balanced.
Gonna be an interestin Chicken Coupe. Being a wide mullet I fell it could end up as The Koi Car.. but as with most mix n match custom builds using parts wombled from various things it might end up naming itself after the first few test runs.
It's Coupe d'Etat!
Skinnys on da front wide in da rear would be perfect 👌
And "HotRock" was born to be wild
That is the best geometry I have seen. Will be curious if there is a quantative diff than others on rocks
Hodge Rod
Would love to either on rovers or extremely skinny 1.9 front and 2.2 rear tires
Buckle up, here we go
It's the Super Couper
also, the CVDs must cost more than a plain axle shaft which you would think woud increase cost. You can install some spacers to lift that spring cup up for more clearance. Or, oooo, offset rod ends for Dravs/fake Dravs/2660s.
Coupe - Cooper - Sheldon - Sheldon Couper? Sorry, big bang theory fans here 😊 🎉
Wagwan Canyonaeros 👊
Make it real old school, put it on leaf springs . 😂
It gives Moonshine and Steve Earle vibes
half way through, slide skid as forward as far as possible. probably too late lol
I was going to build just a normal thing to run my Panther Cougars on, but now that I think about it, I probably should replicate this idea, right? Mullet + Cougars might be the best it can get. Not with Element axles tho, too expensive for me
Its going to look goooood, its a shame you dont want to do a flame design, with whatever colors instead of orange/red/yellow
Bigger tire sounds good to me
hello
hello
Howdy
Ahoy
Howdy
How long before we see the revolt build
Totally should have a 3d printed blower to snap onto the screw point on the hood good way to hide it
RPM actually makes one.
@@CrawlerCanyon nice that would be cool
Yo
Coupe would be a good name for him. Short for cooper
Is this going to be a 4ws guy?
If that is a TGH 2low. Isn’t it supposed to be forward motor facing ?
This is a mullet (straight axle front, portal rear) so if the 2Low was in the "normal" configuration, I'd have 82% rear underdrive. Which is not desirable.
😅 i missed that part.
Probably not relevant now that the trans is turned straight but you can swap the driveshafts in the 2 low to help clear the motor
Bellcrank steering under that hood.
Call it Dusty Hill
My vote is LP holds
ZZ TOP all the way
Hit the like button you heathens!
Dommage que ce ne soit pas en français, j'aurais aimé tout comprendre. Bonne vidéo. 👍🛻👽
Do you still own the 46 crawlers? My wife would kill me.
Would you believe… more?
Elemullet.
I was told there would be no math involved……