You should give a letter with a "Data Recovery" phone that clearly states: "Even this device might work for sometime, there is no warranty on it, as it was only made to just work again for the purpose of data recovery"
I agree with your hypothesis that it's capacitance with the M1 breakage. I think we discussed that before when you were testing on the plastic perf/breadboards as they add about a 50pF to the line.
Jason what'd you used to do before iPhone repairs? Always in the electronics field? I used to fix TVs. Learning how smps work helped troubleshooting iPhones oddly
Mostly all corporate / business IT stuff (a good handful of residential too) for $ but have never known anything other than electronics as my primary interest. I've always been self employed except for an IT related "job" or two along the way. A ton more experience in business networks & computer stuff than phones by about 15 years. The whole system that I'm running on today I put in place to track field techs and handle in-store as well as on-site billing for the IT business until phone repair went nuts. A couple of mods and backend apps later, it's running this mail-in business. Still working out some kinks but I am nowhere near switching to Repairshopr :D Actually tried it and feel it would be more work and less flexible to do mail-ins than what I have tailored to my needs.
I think you should ship data recovery devices with battery disconnected and a note inside the phone that the hardware is faulty. That would still allow making backup with the USB wire connected but it couldn't be used without a wire. And if somebody else is going to reconnect the battery, they get the note.
i like your videos and how you talk about life in general I do have electronics background but in recent years had to settle for something else. Job pays good 15 an hour but hours vary Peak seaon christmas and July need a side gig
I was going to say by looking at the time left in the video it was obvious the 1st attempt didn't fix it. then on the 2nd chip replacement with a lot of time left you trolled us by adding a lengthy re-assembly! lol. what temperature to get those chips loose? another good video. I have a 5s that is in reboot loops and occasionally does boot up but prob not worth fixing. pretty sure this occurred after a botched screen replacement by friends husband.
heya I don't know what to say, think think .... you know what would be a challence rebuilding a pcb with all new components and I gues you wil be able to pull it of too ( don't matter time, oke).
you sound good to me. So is there a cheat sheet showing symptoms with most common causes for phone to go bad? I may want to tinker here and there. Have a LGSylo 5 screen went black yet phone turns on. Noticed was trying to make a call so i removed sim. Watched a video how to take apart Except screen have no heat gun saved all parts screws etc. So if i take in repair shop would they charge less since I took apart?
have iphone 5s with problems with HOME botton click itself up but touch ID works any solution for that or have to replace the all flex any suggestion ill appreciate it great work
Just curious..where did you learn logic board repair? I was referred to iteslas program online for learning and trouble shooting. Getting ready to purchase a micro station
Would you do some training for some side $? I live just across the river from you not far. I do phone repair for a living but no board work or data and I would love to know how to do so for our awesome customers.
You never answered me , what kind of hot air do you have , and wha temp do you use ? Specially with iphone 6 plus tuoch ic's , and what about the air flow !?!
need help I change the touch ic on a iPhone 5s and now it such on apple logo reboot then go back on apple log repeatedly, how can I get the phone back up please I need your help!!!!
Hi sir, iPhone 5s dead - when connect power supply dc and power on it stuck on current 0.15..nothing more shows and mobile in dead mode...any suggestion sir plz
You should give a letter with a "Data Recovery" phone that clearly states: "Even this device might work for sometime, there is no warranty on it, as it was only made to just work again for the purpose of data recovery"
I agree with your hypothesis that it's capacitance with the M1 breakage. I think we discussed that before when you were testing on the plastic perf/breadboards as they add about a 50pF to the line.
That's right. We did talk about that. :)
This is the first time I think I've ever watch a video over an hour. Great informative video bud, thanks!
20:55 i almost had an heart atack coz i thought my gpu was showing artfacts thanks god was in the video
Jason what'd you used to do before iPhone repairs? Always in the electronics field? I used to fix TVs. Learning how smps work helped troubleshooting iPhones oddly
Mostly all corporate / business IT stuff (a good handful of residential too) for $ but have never known anything other than electronics as my primary interest. I've always been self employed except for an IT related "job" or two along the way. A ton more experience in business networks & computer stuff than phones by about 15 years. The whole system that I'm running on today I put in place to track field techs and handle in-store as well as on-site billing for the IT business until phone repair went nuts. A couple of mods and backend apps later, it's running this mail-in business. Still working out some kinks but I am nowhere near switching to Repairshopr :D Actually tried it and feel it would be more work and less flexible to do mail-ins than what I have tailored to my needs.
what a relaxing show,its like watching coocking show.
i can watch you more then 4 hours a day 😁
thanks
I think you should ship data recovery devices with battery disconnected and a note inside the phone that the hardware is faulty. That would still allow making backup with the USB wire connected but it couldn't be used without a wire. And if somebody else is going to reconnect the battery, they get the note.
excellent video, though didn't seem to show up in the subscription listing O.o
i like your videos and how you talk about life in general
I do have electronics background but in recent years had to settle for something else.
Job pays good 15 an hour but hours vary
Peak seaon christmas and July
need a side gig
Do like Chris Long does and hold the logic board by the shield up over the mat a couple inches, then let the board fall to the mat.
I'm going to Florida to learn from you.
Thank you for posting
well done! i wish you upload more often videos
Honestly you are the best
BTW, microcenter is the greatest store in the world too!
I was going to say by looking at the time left in the video it was obvious the 1st attempt didn't fix it. then on the 2nd chip replacement with a lot of time left you trolled us by adding a lengthy re-assembly! lol. what temperature to get those chips loose? another good video. I have a 5s that is in reboot loops and occasionally does boot up but prob not worth fixing. pretty sure this occurred after a botched screen replacement by friends husband.
Thank you for the valuable information and I am satisfied with the information and greetings for your presence
You rock man! Thank you for your time !
Thanks , Another one to learn....
the repair shop said to me that my phone is need to replace the lcd and change new one. but i saw in your video is not needed to replace my Lcd.
subscribed because you are awesome!!!
Fantastic job
heya I don't know what to say, think think .... you know what would be a challence rebuilding a pcb with all new components and I gues you wil be able to pull it of too ( don't matter time, oke).
you are the best, bro!
you sound good to me. So is there a cheat sheet showing symptoms with most common causes for phone to go bad?
I may want to tinker here and there.
Have a LGSylo 5 screen went black yet phone turns on. Noticed was trying to make a call so i removed sim.
Watched a video how to take apart
Except screen have no heat gun
saved all parts screws etc.
So if i take in repair shop would they charge less since I took apart?
Excellent work ! Well done man !
great video again, thanks!!
Excellent!
good work
have iphone 5s with problems with HOME botton click itself up but touch ID works any solution for that or have to replace the all flex any suggestion ill appreciate it great work
Just curious..where did you learn logic board repair? I was referred to iteslas program online for learning and trouble shooting. Getting ready to purchase a micro station
someone should buy you a nice mat!
Boa noite! Vc poderia me explicar a diferença entre os dois Cis controladores do touch? Desde já agradeço!
complimenti!!!!!!!!
Thank u for this video . I would like request u to introduction about logic board component series iphones like what function of IC
I have an iPhone 5 with no network reading my sim card is on it already and no bar, do I reload the os. Pls respond am one of your fan in Nigeria.
@3:11 response "give me a break will you" )
hi jason i have the same problem on a locked iphone 5S, i need to ask you some things about touch chip, and u3 chip, how can i contact you, thanks.
very good
Genius!!!
good stuff!!!!!!!!!
Thank u :))
Would you do some training for some side $? I live just across the river from you not far. I do phone repair for a living but no board work or data and I would love to know how to do so for our awesome customers.
You never answered me , what kind of hot air do you have , and wha temp do you use ? Specially with iphone 6 plus tuoch ic's , and what about the air flow !?!
Who else watched through the entire video?
i do on all his video and in this one he felt like going to get rest fast lol
I do. So many ideas I take from him.
I have the same issue with my 5s can u fix please??
+STS Telecom what do you use to connect and remove the ribbon cables? How do you know where they connect?
Is that possible for the Touch ID to stop working after backlights repair on a iPhone 6?
Is the touch ic on iPhone 5 same as 5s?
need help I change the touch ic on a iPhone 5s and now it such on apple logo reboot then go back on apple log repeatedly, how can I get the phone back up please I need your help!!!!
I had the same repair literally 2 days ago lol
Hi sir,
iPhone 5s dead - when connect power supply dc and power on it stuck on current 0.15..nothing more shows and mobile in dead mode...any suggestion sir plz
Quit smoking 5 years ago, it does pass, hang in there, hardly ever get a craving now.
How much will it be repaired?
Sir, I have iPhone 5, the problem is in that phone that when I call, the phone is restarted after a few seconds, please in Sir Help
DON'T OPEN IT. PUT SOME PRESSURE ON SCREEN WITH YOUR FINGER. UPPER RIGHT CORNER. . YOU WILL BE ABLE TO ACCESS YOUR PHONE FOR A WHILE. THANX ANYWAY
Help meeee 😖😖😖😖
very good