Workbench Welding Table build
Вставка
- Опубліковано 11 чер 2023
- DiscountCode: Metalist15 (for a $15 discount)
FEZiBO Ultra-3 Stage Frame: bit.ly/3NeRzQb
US store: bit.ly/3OW12gw
DE store: bit.ly/3WNPrSR
I've wanted to try this for a long time. Whether that works and how strong such a height-adjustable table frame really is. I am very positively surprised. It lifts up to 120Kg / 264lb
Thanks to the sponsor for this video. FEZIBO
I first wanted to build a base for the castors. But that wasn't necessary at all. To do this, the table should look as clean as possible. So I built a tabletop from 4mm sheet steel 1x0.6m
I always use this bending technique when I want to get a particularly sharp bending radius.
I'm very happy with that result and I'm going to put a powerbank on it, to make it wireless :)
Thanks for watching and if you have any suggestions as to what else you can build with such a table frame, just write it in the comments.
Dirk - Наука та технологія
6:11 I appreciate the auto unground feature
Great idea. If I ever make a welding table, I'll definitely consider this
Great idea for matching work table height with saw or other tools. Thanks for sharing!
Now that’s a great idea being an adjustable out feed or tool table.
Thank you 😁
crazy. I was just visualizing this exact build a few days ago with a cast iron fixturing top.
Ну наконец. Заждались. 👍👌
😅
Good work. We shared this video on our homemade tools forum this week 😎
Hey can you do something like this but with a bed? For someone in a wheelchair?
Excellent, I'll have to try welding threaded studs on something. Thanks from Colorado
Rather than buying bolts or screw and cutting them off, buy a length of all-tread (threaded rod) and simply cut to desired length. Keep a healthy supply of nuts and washers for the various sizes of threaded rod you have
I really appreciate all of your work. Very thoughtful and great attention to detail. Nice Job...again.
Thank you 😁
Man, Now I've got to go buy a sit stand table to pilage
I had the same idea, thanks for showing that the concept is good. Have you had any electrical interference issues with the control electronics whilst welding?
Nice. Well done.
Great job and so useful. It goes so high too, I wasn’t expecting that.
me too. and it is very stable and strong too :)
So cool...your stuff inspired me to try out welding a while back
Super genial Dirk ,das wünscht man sich in jeder Werkstatt 😊Währe auch super für Gasgrill drausen!Wünsche Dir und allen die dabei sein können ein schönes Weldend 😁 Grüße
Hi Marko, ja so länger ich damit rumgespielt habe desto mehr Ideen kamen mir. Die Grill Idee hatte ich jetzt noch nicht aber Möglichkeit sind enorm vor allem das teil hat echt power hätte ich niemals gedacht. Schade das du nicht kommst wäre lustig geworden :)
Es gibt einfach nicht ein einziges Video, wo man nicht total fasziniert zuschaut und sich nicht traut vorzuspringen, um sich selbst die Überraschung nicht zu versauen ☺👌 Super Projekt und von der Umsetzung wie immer Hammer! ❤ Wobei: Ich dachte deine Tische werden immer mit "CuSi" beschriftet und nicht mit Aufklebern? 🤣 Ansonsten auch richtig geile Kameraführung mit dem Winkelschleifer-Schwenk und dir schon mal viel Spass auf der Weldend ! 👋😉
Vielen Dank 😁 ja sollte jetzt auch kein zu aufwendig video werden. Da ich das Projekt dazwischen geschoben habe. Aber soviel verraten ich schonmal da kommen jetzt noch ein paar Tische die nächsten Wochen/Monate 😁 allgemein kommt die nächsten Wochen einiges von mir. Freue mich schon riesig. Schick mir mal deine Adresse per Mail dann lass ich dir noch ein paar Sticker zukommen 😁
Very useful table. How about a reinforcement bar linking the back base, I think would be good for a better stability
I wanted to build a base for the castors first. but the part is shockingly stable. You can still weld all screw connections
Excellent..! You allways do what we -the Others- want to do before we know what we want to... Afterwords we say...: AAhhh, of course..! Why did'n I do that before.... 🙄😉
Oh btw, I did the pointing hand last year... Keep up inspiring the world..!
☺️thank you 😊 awesome yes i would like to see it😁
Nicht schlecht,gefällt mir ❤😊😊😊😊
Olá boa tarde, sou do Brasil, parabéns seus vídeos são muito bons.
Thank you 😁👋
Top,1A wie immer😊👍🖖
That’s cool
I haven't watched it yet but 👍
Brilliant! Well done, sir
Thank you 😁
Sehr schönes Video mal wieder!
Dankeschön 😁
UM TREMENDO PROJETO ..POREM FIQUEI EM DÚVIDAS ..SE PUDER ME RESPONDER JÁ AGRADEÇO ..O SOBE E DESCE ...LEVANTE E ABAIXAMENTO DA MESA TEM UM EIXO DE ROSCA SEM FIM ??OU UM EIXO DE RISCA DO JAK ??JÁU SP BRAZIL
Tem uma rosca de cada lado ligada por um varão central pra usar somente 1 motor
Eu acho que é um fio sem fim com paradas
AOS DOIS AMIGOS QUE SE IMPORTARAM ..COM MEU COMENTÁRIO ...TENHO GRATIDÃO ..AS ORIENTAÇÕES AQUI PASSADAS ...DEUS OS ABENÇOE SEMPRE ..JAÚ SP.BRASIL
Fanbloodytastic top lad 👍👨🏻🏭🇬🇧
Thank you 😁
Schönes Projekt, Top Video
Danke schön 😁
wicked idea !!!!!!!🙂
Thank you :)
stupendo una figata
Thank you 😁
Endlich 😃😃😃👍🏻👍🏻👍🏻👍🏻
Ja ja bin dran. In nächster Zeit kommt einiges 💪😁
Excelente propuesta 👍
Thank you 😁
Super
Convenient!
😁😁😁
Geile Idee vor allem für die Säge und Bohrmaschine, und schön unterm Tisch verstaubar. Mich würde interessieren ob du dir die Elektronik des Tisches auf Dauer mit mit WIG ( HF Zündung ) ins Nirvana schießt.
Merci 😊 ich glaube solange die Masse Klemme dran ist passiert nichts 😅 vl noch tischgestell und Platten isolieren. Und im Fall der Fälle kommt eine kurbelt dran 😁
Nice 👍
Very well!
Thank you 😊
Immer und immer und immer wieder hammer geile Videos von dir. Jetzt hab ich aber auch mal ne blöde Frage: nimmst du für die Schrauben zum Anschweißen Edelstahl oder schleifst du die Verzinkung immer weg ( was ich mir fast nicht vorstellen kann)? P.s. vielleicht sehen wir uns beim Alulöffel, ich bin mir über mein Kommen (hust) noch nicht im Klaren.
niemals Edelstahl die fressen viel zu schnell,(schon oft passiert) zumindest wenn man sie oft auf und zu schraubt. Außer es muss an Edelstahl angeschweißt werden. Min meistens verzinkte. Ja hoffentlich wird cool freu mich über jeden der kommt :)
👍👍
Bin gespannt wie lange die elektronik mit der wig hf-zündung durchhält😅.
Evtl machst dir unten noch am querverbinder rein, dass die füsse a bissl stabiler werden
Ja denk vl auch das das Problem geben könnt aber probieren 😅
Ja wollte erst ein Untergestell für die Rollen bauen aber das Teil ist erschreckend steif selbst im ausgefahrenen Zustand 😁
Geil 🤩
Merci 😁
wow :-)