I just learned that phase controller can be a culprit on error 43 , thanks, I've been fixing gpu recently and i just stopped, surrendered on repairing due to lack of tools like thermal cam, reballing machine, etc.
Just about everything that's not working properly can be the culprit for error 43. Usually, to determine if a controller is working properly or not, one needs an oscilloscope. A controller can actually work... of a sort but many times it can not provide the correct output towards whatever it is controlling so you get a core voltage but it is not the right one so the card will work but actually not work. You can repair probably 75% of the broken cards without a thermal cam. Anyway there is a pen that puts a tiny layer of soldering rosin on an area of a board and you can see where it's heating. It costs almost nothing.
@@Dandan-tg6tjright, you Can also use the freeze Can or air blowing Can in upside down position. It will create a thin layer of ice and After poking the card, the thin layer melts on the faulty component
Damn, @northwestrepair... your videos have gone leaps and bounds from just a year ago. Your production value and quality improvements are damn impressive. Excited for what's new!
Wow you really got deep in the whole matter already! Nice job, you earn my respect! I am also going deeper and deeper in trying to repair graphic cards and now I'm going to do my first steps in reballing GPUs. Althought soldering is nothing new to me, I have to say soldering such kind of things is a complete other world! I have killed my first try, pins and lines while desoldering with an underpowered iron... But now to the point: Beside the fact that one need the right tools and know-how I am stuck at the point of where can I get spare parts? Did you take your spare-chips from another card? best regards and keep going man this is aweseome :)
Great content and detailed information. I have a 1080 ti with a possible bad memory chip, where do you buy the memory chips? And what's the process of getting a gpu repaired by you?
Awesome vid! Question: what temperature are you heating the memory chip with when reballing, and when you mount the newly reballed chip to the board do you keep the same temperature on the hot air? Thanks for the info you provide!
Great! I am wondering why you're not using an oven with an IR heat source, regulated temperature for those balls to melt? Would it not be more reproducable results, only time and temperature must be experimented once?
to over come over heating the chip i put a pre heater underneath the chip( controlled type )this will give best results and fast ensuring not to damage chip from over heating
Hi, i am new here and i love your videos. I really value people like you who like to dive deep. Please keep up the good work. Can you make a tutorial on mats? Or any link of your video if already done, thanks.
Hi, first good videos, but two points. Dataline in midle is diferent too on good chip. 😬 Second, soldering on iron is no good idea, better is on wood, best on wiremesh. Simple minimalize contact with cold surface.
Been watching you a lot lately. Seems like everyone uses solder balls for reballing these GPU chips and ram. I'm from the mobile world and we always reball with stencils and paste. How do you decide which size balls to use?
I have a strix gtx 1060. which have all the voltages and resistances present correctly. The pc boots up with no image and gpu fans 100% speeding. can you make a video tutorial on how to make a bootable mats usb which we can run and test blindly with no image on screen?
For me, the most important question would be: How to get Mods/Mats up and running? If I come across a dead graphics card, I would be willing to do the BGA rework and everything around it. However, I cannot spent hours or even days, trying to get some semi-official software compiled in a Linux-Environment (which I don't have) and deal with one roadblock after the other trying to get it to "just work". Is there any hint you can give me where and how to get a version of that software, that can be made operational with about the same amount of work that it takes to get a windows installer operational?
hi, excellent video, thanks to you I identified the faulty ram module of my rx580, it gave artifacts on the video, I removed it perfectly, I'm waiting for the new module to arrive, question, what if I start the video card without the ram module? Something happens? Thank you
please make a how to identify components including the minor rails of a gpu pcb, resistances videos and stabbing guide where to stab probes for beginners please please please.
Hello When I enter the game (Warzone), after a few minutes the image freezes and nothing works, and I only have to press the reset button on the case to restart the system! I also tested it with the Furmark software and inside the GPU-Z software TDP it is at zero percent . GPU MODEL : ROG Strix 1050ti o4G ( The maximum temperature is 62 degrees under load )
Hello, How do you test memory GTX 1080 like you do here? My card shows only 4GB memory instead of 8GB, posts with black screen, everything else working, voltages, etc.???
Friend very surprised with your videos, could you share the document detailing the pinout of the Memory, to be able to carry out the respective measurements
Hi, young-old man I have a tech-question! how to check on Samsung ddr5 memories? I got 70K while red probe on vddq and black on vssq! tell me if you want to stay young (!)
Hello brother, I am repairing the graphics card. Is it possible to convert an 8gb card to 6gb in the rx series? For example, the chip is faulty, even if the d0 and 01 vrams are changed, it still shows faulty. In this case, is it possible to disable d0 and d1 and run the card as 6GB?
Gddr5 and gddr6 are different size chips. You can change the brand of chips but this requires modifying the strap resistors. Same brand you can normally use anything that's equal or faster than the original
I just switched from nvidaa 3070ti to an amd 6950xt. Finding the adrenaline a lil cumbersome , but POINT IN THIS COMMENT IS TO SAY IN SURPRISED AND ALSO CURIOUS. Why so many nvidaa broken? Is it cuz amd isn’t as popular so You don’t get that many or is it there made better or is it you don’t specialize in amd? Is that why there’s basically zero on ur channel(idk haven’t looked hard, just the alerts I get)
Wow as a techie I wish I had your skill set. One thing,,, You say EVGA is the best however it seems you have more EVGA cards in for repair than other brands? Personally I like Gigabyte as I've had less issue than with other brands. Also they have the best after sales support. At least in SA where I'm from. Keep up the awesome content!!
I have a thinkpad making sound of error display, and a coil is heating up pretty much. It all happen when I used it with a broken screen until it went dead. I live pretty far in a farm so I’m a little stuck with this problem.
It’s about time we seen more in-depth PC tech channels. Thanks and I love the content!
I just learned that phase controller can be a culprit on error 43 , thanks, I've been fixing gpu recently and i just stopped, surrendered on repairing due to lack of tools like thermal cam, reballing machine, etc.
Just about everything that's not working properly can be the culprit for error 43. Usually, to determine if a controller is working properly or not, one needs an oscilloscope. A controller can actually work... of a sort but many times it can not provide the correct output towards whatever it is controlling so you get a core voltage but it is not the right one so the card will work but actually not work. You can repair probably 75% of the broken cards without a thermal cam. Anyway there is a pen that puts a tiny layer of soldering rosin on an area of a board and you can see where it's heating. It costs almost nothing.
@@Dandan-tg6tjright, you Can also use the freeze Can or air blowing Can in upside down position.
It will create a thin layer of ice and After poking the card, the thin layer melts on the faulty component
Damn, @northwestrepair... your videos have gone leaps and bounds from just a year ago. Your production value and quality improvements are damn impressive. Excited for what's new!
One thing I learned here is that there is no substitute for skill and experience
or in other words: well played, sir.
Man this videos are pretty good, I have no idea what your doing but its interesting
Still great content a year after it was posted. Nice work.
Good job not giving up! I wish you were nearby me, I have so many GPUs that need help!
Wow you really got deep in the whole matter already! Nice job, you earn my respect! I am also going deeper and deeper in trying to repair graphic cards and now I'm going to do my first steps in reballing GPUs. Althought soldering is nothing new to me, I have to say soldering such kind of things is a complete other world! I have killed my first try, pins and lines while desoldering with an underpowered iron... But now to the point: Beside the fact that one need the right tools and know-how I am stuck at the point of where can I get spare parts? Did you take your spare-chips from another card? best regards and keep going man this is aweseome :)
Cool video! Where you buy the chips? And where i find Wiring Diagrams for gpus, memorichips ?
Great content and detailed information. I have a 1080 ti with a possible bad memory chip, where do you buy the memory chips? And what's the process of getting a gpu repaired by you?
aliexpress mostly
I appreciate the quality contents you present. This may help me resolving PS4 DCT ram errors.
Yes
You should add video of " ladies and gentlemen we got him" when find the chip that responsible for the error. It would be fun.
Awesome vid! Question: what temperature are you heating the memory chip with when reballing, and when you mount the newly reballed chip to the board do you keep the same temperature on the hot air? Thanks for the info you provide!
Great! I am wondering why you're not using an oven with an IR heat source, regulated temperature for those balls to melt? Would it not be more reproducable results, only time and temperature must be experimented once?
God bless brother
You too
Awesome video
wow very nice to see this stuff great work 👍
to over come over heating the chip i put a pre heater underneath the chip( controlled type )this will give best results and fast ensuring not to damage chip from over heating
Hi, i am new here and i love your videos. I really value people like you who like to dive deep. Please keep up the good work. Can you make a tutorial on mats? Or any link of your video if already done, thanks.
Where do I get that software to check for gpu memory errors? I only know memtest which is for ram
In cloud
Much Peace and Many Blessings
Hi, first good videos, but two points. Dataline in midle is diferent too on good chip. 😬 Second, soldering on iron is no good idea, better is on wood, best on wiremesh. Simple minimalize contact with cold surface.
Been watching you a lot lately. Seems like everyone uses solder balls for reballing these GPU chips and ram. I'm from the mobile world and we always reball with stencils and paste. How do you decide which size balls to use?
I have a strix gtx 1060. which have all the voltages and resistances present correctly. The pc boots up with no image and gpu fans 100% speeding. can you make a video tutorial on how to make a bootable mats usb which we can run and test blindly with no image on screen?
Hi Sir. Can i ask how to make memory tester of vram of gpu? Thanks
For me, the most important question would be:
How to get Mods/Mats up and running?
If I come across a dead graphics card, I would be willing to do the BGA rework and everything around it. However, I cannot spent hours or even days, trying to get some semi-official software compiled in a Linux-Environment (which I don't have) and deal with one roadblock after the other trying to get it to "just work".
Is there any hint you can give me where and how to get a version of that software, that can be made operational with about the same amount of work that it takes to get a windows installer operational?
hi, excellent video, thanks to you I identified the faulty ram module of my rx580, it gave artifacts on the video, I removed it perfectly, I'm waiting for the new module to arrive, question, what if I start the video card without the ram module? Something happens? Thank you
Amazing job, where i can get that GDDR5 Chart?
Awesome content very informative and interesting just subscribed! Do you accept broken cards sent to you for repair?
Yes why not.
What kind of card is it ?
@@northwestrepair hellu.. can i know what tools you use in this video to repair?? coz i also want to learn from u..
please make a how to identify components including the minor rails of a gpu pcb, resistances videos and stabbing guide where to stab probes for beginners please please please.
hello, i would love to know the test method and how to use it on a laptop with an RTX3070
What OS did you use to check for GPU memory errors similar to x86 mem test?
Buenos días, gracias su esfuerzo. Aprendí algo nuevo, gracias. Seguiré con su canal
Hello
When I enter the game (Warzone), after a few minutes the image freezes and nothing works, and I only have to press the reset button on the case to restart the system!
I also tested it with the Furmark software and inside the GPU-Z software TDP it is at zero percent .
GPU MODEL : ROG Strix 1050ti o4G ( The maximum temperature is 62 degrees under load )
Supercool bro!
I have a coupe of ddr5 D9VVR and they measure like 300k between gnd and vcc. Are they bad?
Awesome ✌🏻✌🏻✌🏻✌🏻
What program did you used to check for your problem memory?
where would one find replacement VRam chips i have a 1080TI aorus extreeme edition and it has a bad vram chip i want to get pre balled chips
That tub of screws, did they all come out of that one card?
Hello,
How do you test memory GTX 1080 like you do here?
My card shows only 4GB memory instead of 8GB, posts with black screen, everything else working, voltages, etc.???
I've got an EVGA RTX 3070 XC3 and it shows a code 43 and has been showing green artifacts.
could you reball the memory chips by putting them in a reflow oven? Thanks for the video.
Sure
@@northwestrepair Thanks
wow nice content!
Hi.
Do you know if an ASUS Strix 1060 will run and produce an image without the external 8pin connector?
Just for testing of course.
Thanks.
Friend very surprised with your videos, could you share the document detailing the pinout of the Memory, to be able to carry out the respective measurements
Do you think the K4ZAF325BM-HC14 would work on the 1080ti?
Thank you
Hi, young-old man I have a tech-question! how to check on Samsung ddr5 memories? I got 70K while red probe on vddq and black on vssq! tell me if you want to stay young (!)
Hi, can’t you heat up the balls with the stencil on, like you do when using solder paste?
is it possible to obtain the software you use at 19:45 to test memory chips?
Hello brother, I am repairing the graphics card. Is it possible to convert an 8gb card to 6gb in the rx series? For example, the chip is faulty, even if the d0 and 01 vrams are changed, it still shows faulty. In this case, is it possible to disable d0 and d1 and run the card as 6GB?
hello, I just want to know what temps are you using when working with GPUs?
factory solder around 300
leaded solder, 250'ish
what does the r25 1412 chip do on the gtx 970 .!! i think its either r25 or p25 1412!!! please help
what linux software are you using?
do you happen to have the iso image of the mats?
Mine gives green display while using with a continous stuttering sound. Is it also hardware problem?
I have gtx 1070 ti and hot spot go's up to 96c° in temps and gpu core 83c° temps on full load is it normal or should I be worried 😢😢😢
When showing all memory bad then what's the problem?
How can i test a memory chips ? Is there a tool lile we do with eproms(just exampl)
measuring resistance vram chip chat pls 5:45 or any link for download
If you change memory, is has to be same brand?
Is it ok for example change all for better memory brand?
And can you change from ddr5 to ddr6?
Gddr5 and gddr6 are different size chips.
You can change the brand of chips but this requires modifying the strap resistors.
Same brand you can normally use anything that's equal or faster than the original
hi what kind hardware did you use in your test setup?
all sorts
Can i use samsung ram chip instead of macron?
I just switched from nvidaa 3070ti to an amd 6950xt. Finding the adrenaline a lil cumbersome , but POINT IN THIS COMMENT IS TO SAY IN SURPRISED AND ALSO CURIOUS. Why so many nvidaa broken? Is it cuz amd isn’t as popular so
You don’t get that many or is it there made better or is it you don’t specialize in amd? Is that why there’s basically zero on ur channel(idk haven’t looked hard, just the alerts I get)
correct.
AMD are rare and thats why there are not many repair videos on them.
what a job
what an artist
can you mak ea video about how to test amd gpus vrams ??
Already have R9 270 video on that subject
@@northwestrepair i dont find it on the channel
can i have the link plz ??
Wow as a techie I wish I had your skill set. One thing,,, You say EVGA is the best however it seems you have more EVGA cards in for repair than other brands? Personally I like Gigabyte as I've had less issue than with other brands. Also they have the best after sales support. At least in SA where I'm from. Keep up the awesome content!!
Well not that it matters anymore EVGA is no longer making Nvidia cards :D
Hello 🤝good job 👏👏👏👏👍👍👍👍👋👋👋👋
what was used to see the broken memory chip
MATS utility
What's the tool name that u use to check bad memory module??
all of that is on my discord server. link in description
Do GPU HAVE SCHEMATICS
Can you share how to create the automated script that tests and shuts down the PC?
discord has it all
How do I run that test?
the mats for gtx is corrupted..please upload new link for that..thank you
Discord. All there
What about if i have errors on 5 from 8 vram chps!?
reball the core
Question why does it only have 4 power phases?
To limit the life of the card, after warranty ended the mosfet Will degraded from heat and died making the crater on PCB pad
o.k. For the life of me I can't even remember why I asked the question now.
im sad, today I learned my RX 580 will start artifacting if the vram goes above 5,8 GB
What causes graphics cards to fail?
lots of things
What bga ball size u r using
0.45
Where you find these chips ?
Mostly in AliExpress
👉👏
My 7870 still gives display even with one memory desoldered 😂
Is 0.40 mm balls good?
I use .45
Aku mendengar nya suara kartun tv😂
I have a thinkpad making sound of error display, and a coil is heating up pretty much. It all happen when I used it with a broken screen until it went dead. I live pretty far in a farm so I’m a little stuck with this problem.
And doesn’t give image with external monitor neither.
What is this, it's a graphics card. What's wrong with it? It has bad memory... what is it?
Asus GTX 1070 boots , it's pixeled bad everything shows up in gpuz besides memory size, bus width and bandwidth
I have a GTX 1070 how much would it cost to diagnose it I think it's a ram issue it's a Asus
reflash bios. make sure 100% correct.
check strap resistors