Interesting idea, but it's a hard pass from me. The noise would drive me crazy and I bet I'd be able to feel every microscopic piece of whatever between the mouse and the pad.
I feel every time I have a hair under my mouse and I have normal mouse bad. It really doesn't happen that often. But if you can feel smaller stuff when using that, it might be a problem
I have the skypad, and for most of the time you don't feel anything benieth it, only sometimes when it's something big which is super easy to just wipe away thanks to the smooth surface, the benefits definitely outweigh the drawbacks. It's not so loud that I really noticed after moving and it just blends in after a while. It's super easy to clean and for someone who eats at their desk like myself it's real nice to be able to clean it so easily.
With the right skates its not a problem, its quite unfair with the wrong pads. I had this back in 2005 isch with the IceMAT and loved it, this might replace my LTT Mat :D
My 1st gen Icemat from earlier 2000s still in my drawer, only the mousepad rubber feet is melted due to aging. Compare to today mousepad standard it make much louder noise in comparison to aluminium,hard surface or cloth surface mousepad. Your mouse feet will wear out faster too.
I've had my hard plastic Compad Speedpad for about 20 years and wouldn't exchange it for anything else. It's more silent than a glass pad and you can throw it out of the window from the 5th floor and it'll more likely chop someone's head off than break. It's super easy to clean, slimmer than the glass pad, has beveled edges, still has all its rubber feet and works awesome with every mouse I have ever used, regardless if it's laser or optical. I seriously don't understand why they aren't being made anymore.
I still got an old black Icemat lying around it's quite small compared to todays mousepads, but it's also tempered glass etc. looks very much like that one tbh though it's too noisy IMO. I like the elements ice from GGMR - though it's hard to clean
I use a Green Arts and craft self healing Cuttin Mat thingy. Works surpsiingly extremely well and i dont have to wash it like i would with a mouse pad.
Since they're local to LMG, just ring up Vitrum and ask them for a chamfered sheet of 3mm temp glass for about 30-40 bucks or less (any glass shop really), and paint the bottom with any colour of latex you like--like a piece of tempered spandrel glass. Wait til it dries, stick some rubber feet on the bottom. Buy the teflon mouse skids separately. Save a ton. $100 dollars is a complete rip off. I work for a window company. $100 is a rip for what that is.
I bought the Razer Manticor a while ago, which is made of sandblasted aluminium. It felt pretty amazing for a bit, but after a while, the mouse started to feel and sound really scratchy on it, and so I decided to retire it for a basic cloth mousepad. I don't think I'll be going back to hard mousepads for a while, after that expensive purchase.
Testing these things without the teflonfeet seems kinda pointless to me. It's like testing new keyswitches on a keyboard, but without the keycaps on it. Would you do that?
People thinking mousepad materiel matters that much Honestly it’s more about having a large enough space and one where the whole area is the same material Consistency > whatever “gamer” product you’re using
I can tell you right now that your mousepad DOES matter and impact performance. I had a cheap $20 cloth mousepad from amazon that had a lot of friction. I got the GN mousepad (shown in this video) and my mouse felt entirely different: Much lighter and easier to move. It was a change that definitely improved my gaming performance.
I have an old Gamind Glass mousepad here, i don't use it anymore but used a lot in the past with my Microsoft 1.1 optical mouse to play cs 1.5, that was +20 Years ago... i'm getting a little old...
only way id consider it (especially at that price) is if i had edgelit ARGB so you could sync it with your PC and an integrated wireless charger for Qi compatible mice. Other than that, I'll keep my $20 waterproof Corsair deskpad. i could never handle the noise and the constant cleaning of it to keep dust to a minimum.
The thing about sound it makes - I would imagine it is the same as if you use just the wood on the desk. If it is that, I can't really hear the noise but rather feel it with my hand, and that is driving me nuts
why would the sleeve stop you from getting pain after a day of gaming? Don't people get pain from having a mouse arm? why does the sleeve help against that.
It's REALLY stupid that they sent you a bunch of samples of the mousepad but no samples of the teflon feet. Since the whole product is built around the combination of the two. Also, this absolutely needs a drop test. For that price it should be able to survive a drop as well as a corelle plate.
The feet are th same as any other 100% Teflon mouse foot. If I recall they're actually just selling someone else's. It's mainly because hard pads eat feet.
@@profosist Hang on a sec. Did I miss something? Did his test mouse already have Teflon feet on it? wait... never mind. 2:19 (Editors note in subtitles: "The G303 does come with teflon feet") I didn't catch that the first time around. 👍
I've never used a mousepad at home. They've always moved around and limited my movements. The ones at my past jobs were disgusting. I would toss them when no one was looking. The sound on my (fake wood) desk doesn't bother me. Reminds me of sandpaper on wood, but a much lower pitch. I don't notice it 99% of the time. It's kind of like white noise.
Why would you make a 15 minute video about this mouse pad if you're leaving the teflon mouse feet out? At the end i still don't know how this setup actually works.
I have tried glass mousepads and they're not great. I live in a very SANDY area and sand GETS EVERYWHERE in this house. HELL my backyard is 70% sand and 30% EARTH. So, that pad would get scratched to heck in no time. Especially since my dog loves taking dust baths.
We had these some 20 years ago. They were called icemat and had the same teflon feet for my MX510. Sadly the noise does not go away but it was smoothhh AF for those times.
Yep same. With MX500. The logical dual optical didn't play nice with the glass and was generally not as good. Still have the jcepad XL, but don't use it anymore because of the noise and the noise skates just wear away so quick.
I used an Icemat glass pad for years. Takeaways: the tiniest bit of dust or grit will instantly ruin your day. Also if your hand sweats, it'll show on the glass. It is super easy to clean though.
@@EikottXD Icemats are basically frosted glass with colored film on the back. So making one yourself is relatively easy (depending on your skill of course).
Resurrect the func anti-friction liquid please. Unless it turned out it was hazardous or something in which case please let me know as I still have some. :)
I used a Boost XL Speed and also tried the Control version for a couple of years. I would try a Dash but I cannot think of a reason after trying the Skypad. And I don't have to buy a new pad every year...I have the 3.0 ordered. So maybe try staying in y'alls own lane?
Small suggestion: For mousepad reviews, at least have a few different mice and (aftermarket) mouse skates at hand. I'm having the feeling that the skates supplied with the 303 just aren't that well compatible with this mousepad, since glass mousepads are usually wayy faster than average cloth deskmats. I think you guys could manage that
I agree, the testing could be a bit more thorough. Could at least have had a set of aftermarket mouse skates and waited on the first party skates from Skypad.
the logo on small one is totally okay. The logo with the cloud or something would prevent me from buying it. It looks really cheap, like it's from one of these cheap stuff stores. Talking about these stores: these stores usually also sell glass cutting boards for a lot less than 100$. I wonder how a glass cutting board would compare. I'm sure you'll be able to find a matte/frosted one.
Yeah, I had that same reaction when I saw that ugly, cheap-looking logo in the big one, to the point that I started thinking if it could be removed with some acetone.
@ Way back in the day when Steelseries/Icemat made similar glass mousepads, people would customise them by stripping the paint on the back and painting their own designs on them. I'd be willing to bet money that these are painted in the same way on the back side, though you'd have to strip the colour layer to get at the logo. But then you simply have a clear mousepad or you can paint it again.
I have had one of these for a few years now, when I bought it it included enough teflon pads for 6 mice/changes I think, in two different textures. They do wear but the reason I ever changed mine is due to folding or them becoming uneven for some reason. Its too bad they aren't included anymore because they are everything, without them I wouldn't bother. Sound is gone and its pretty smooth. My kind of only complaint is that you need to keep it really clean, dust will cause noise and impede movements. I just do it with my dishes. I don't mind though, cleanliness is good.
Good that it works for you, but I could never keep it clean enough. I try to get everything in my setup to just work without maintenance just so i don't need to do anything
All desk pads $30 is the only reason I bought one. It was so awesome to get the perfect size for my desk and not have to pay extra for it being "custom". Thank you Linus!
I've been using the SteelSeries Icemat I-2 for ~15 years. Still looks and feels new, not a single scratch. Dust wipes off easy. Once you use a new mouse on it for a bit, the feet do get a bit more quiet as they wear in, but still audible when making large fast moves. But tbh, I don't notice it during a game. One thing to also be aware of is, it can feel a tad cold in the winter if you have a cold room. But again, once you're gaming for a bit, it warms up. Every few months, I debate buying the LTT cloth pad, but seeing how crappy my brothers Razer cloth pad looks after all the skin and grime, it does put me off cloth pads in general. Overall, I'm still very happy with my glass pad 15 years on. At this rate, I think it is going to out last me. Best ever £30 or whatever I paid back then.
I guess your brother should wash his pad then. You can get them perfectly clean, but very few people do it. I throw mine just in the shower and give it a little scrub with warm water and soap. Looks like new afterwards
I wash my cloth pad every few months on cold hand-wash cycle. It looks good as new. Not saying it's better than a glass one, just something to consider.
@@majorbogart3476 Yeah, I can't fathom how, despite everything that google/youtube is capable of, they can't get rid of this very specific spam, plastered under every video a thousand times. I get that it's posted by bots from different accounts, but the content of the comment is pretty much copy/paste. Getting rid of it should be easy.
@@Renee_R343 it works to their benefit in the long run to let it continue. The more of a toxic cesspool that the comments are, the harder it will be for creators to gauge their audience, and the easier it will be to take it all away "for our own good", so that UA-cam can move closer to the old school ways of media and entertainment. We tell you what to watch and when. We will determine if it is worth your time or not, and worthiness can be bought and paid for. To be clear, UA-cam does not care about the opinions, needs, or wants of it's independent creators or users. They are concerned with advertisers, and the multi-billion dollar companies that pay for promoted content. They have NO PROBLEM taking money from pyramid schemes, illegal online drug stores, and straight up scammers, and running their ads in the videos. Everybody has seen the ads that I am talking about, and yet it has never been a topic that really gets discussed, because we are all busy being mad at the dislike button being gone, or a particular creator being suppressed, or whatever blah-blah drama is going on... Never forget, this is a part of the company that felt it was necessary to remove "Don't be evil" from it's company values.
The gap allows for the pad to resonate freely in the air. Putting it on a desk, or better yet, a regular mouse pad or foam shelf liner will dampen the vibration.
if its performing on par with a $30 deskmat in most ways, and is loud [unless you pay extra still] and smaller otherwise, I think im gonna go for a $30 deskmat tacky logo
I've had the Skypad for nearly a year. The noise is literally because of grime on the feet, and that the stock G303-SE feet are not rounded edges, they are literally trash on even cloth. The reason why they recommend the feet, is because they come with less impurities in the PTFE, and having more rounded edge. The only thing I will say as a con with the Skypad, is the noise because of the dust. Buy an air purifier, which, is always worth, and rounded feet, namely Tiger Arc 1, or Corepads as best value. Runner up being Tiger Ice, but you only get one set with Tiger Ice, Tiger Arc 2 are inferior in every way to all the others, and are only one set. Do not use glass feet, ceramic feet, etc on the Skypad. It will damage it. If you want less chance of dust, then use smaller feet. I recommend just using Tiger Arc 1 MS-3 style feet, they have really good rounding, are cheap, and readily available since they are purposely made for Microsoft mice, and any clones that use MS-3 style feet (Fantech XD5 and other products, Intellimouse Pro, etc.) On a side note, the best perk of the Skypad, is as long as you don't intentionally scrape stuff harder than glass on the pad, it is technically indefinite, and if there is any grime, windex / rubbing alcohol / lighter fluid, etc, perfectly clean, dries in under a minute, vs washing a cloth pad and waiting a few hours for it to dry.
@@st33ldi9ital If it's not for you, just don't do it, that doesn't mean that other people can't take their hobbies seriously. It's kind of what runners do with running shoes, are they going to make you run 100 times better? Probably not but maybe a tiny difference in how you feel the ground is enough for winning the marathon.
@@haroldtrei Yea sure whatever you wanna believe or makes you feel better. Idgaf about feet or pad or whatever. Nothing been new in that space for over a decade. Lol dude really said get an air cleaner.. for your mouse... Switch to trackball and ya never have to worry about any of that. Can use whenever and wherever. No pad needed.
@@st33ldi9ital You don't, for the most part with a dusty room, it rarely happens. Even if you ain't using a hard pad, there are very few mice that actually come with good stock feet. Anything from Razer after the release of the Viper is fair, Burst Pro / Kone Pro, Logitech generally just has the worst stock skates. They literally use a foam spacer so that they have to spend less on PTFE...
@@st33ldi9ital The purifier is just for laziness. Personally, I only gotta brush dust off the pad once every two days. And cleaning is literally a 2 min ordeal. Point of glass is mostly just having consistency, no matter what. Like the dude that was talking about using an Icemat for 15 years or w/e.
I'm a former high level competitive CS 1.6 and CS Source player and I've been waiting ages for a mousepad like this to come out. I had an Icemat back when I was playing competitively and it was by *FAR* the best one I've ever used in terms of accuracy and smoothness. If it wasn't so small I'd still be using it today, but large mousepads were pretty uncommon back then and they never made a larger size. I will be buying two of these at least (just in case they stop selling them and I break one). Regarding the noise, you get used to it and filter it out to where you don't even notice it anymore. It's not loud enough to be intrusive, and if someone is in the room with you your keyboard and mouse clicking is far more of a problem than a soft scraping sound.
I've used an aluminum mouse pad before, and it's nice, until you get anything at all dirty on the pad or in the feet. You get friction spots / scratchiness that just sucks, and then your detailing the pad with your fingernail, or the bottom of you mouse with a toothpick, to get back to the good feel
I bought an aluminium mouse pad from corsair about 8-9 years ago now and it has been fantastic, best product they ever made even though I thought it was over priced when I bought it it has absolutely been worth it 10x over
I'm using mm350 pro from Corsair. Also have a backup Logitech g240. Both have been excellent servant to me. Although Corsair one is less sensitive to humidity
How well do your mouse skids/feet last on them, almost all the offices ive seen people use hard surfaces for their mice (glossy wood tops, glass tops) is that the feed wear fast and eventually they burn through to the point the feet are gone and the mouse is rubbing on its plastic, which is also starting to wear. sure it moves ok across the surfaces but after the feet wear off it starts to feel gritty.
@@12chrisrob I think my one is the mm600 but from before corsairs "yellow" phase so it has the origional corsair logo with plain black surfaces on both sides, it may actually be older than I thought it was.
Man I've never been so not interested in something mouse related before, way too expensive and makes no difference for gaming for me personally since my mouse sensitivity is usually pretty high so I don't even need a pad that big.
something is off, seen some other reviews on these and they don't sound like grinding and they are so smooth the mouse almost flies off the pad, maybe you guys should give the alternative feet a try, even corepads which are some more famous aftermarket feet
I got an Icemat when I was younger and spent most of my life gaming on a glass mousepad (I'm 36, that was around 2003-ish). It appears to be very similar to this. Here are my thoughts on gaming on a glass mousepad: 1. The sound never really bothered me or anyone else, but I've been lucky enough that I've always had a private space to game. 2. The consistency is the best attribute. I still have my mousepad, and it has the exact same friction as the day I got it. The only reason I stopped using it is it's too small. (also slightly suspect this is why they stopped making them - never need to buy another one). 3. Palm sweat accumulates on the pad and so I found that I would wipe it off somewhat frequently. It didn't really impact my aiming though 4. Tracking is way better than you might expect. Even super old mice like my razer diamondback 3g tracked on it perfectly, but some super cheap mice couldn't track on it (I'm going to assume this wont be a problem with any modern mouse). 5. The lip of the glass against your wrist/forearm can rub and get a little bit irritated but honestly once you get used to it you forget about it all together. 6. I was so worried about my mousepad at first, I carefully wrapped it each time I moved etc. Turns out it was for nothing, that thing is a tank. I've dropped it on concrete no issues at all. It is substantially smaller than these though, so I suspect these won't be as invincible. 7. The paint on my Icemat began to flake away some on the bottom. It was black and the glass was frosted, so I filled it in with a sharpie and it worked perfectly. 8. If you don't have mouse feet and/or the bottom wears too far down you can get a suction effect going on when lifting that's literally unplayable but hilarious. Fun for hours if you're ADHD like me. 9. For best results use a new mouse with it from day one. The mousepad preserves the condition of the mouse and feet nearly never need changing. I wouldn't believe it if I didn't experience it first hand, but usually the "crappy mouse feel" comes from a mouse that's been tainted by being used on non-glass surfaces. This even extends to things you don't think of like stickers getting curled and snagged on cloth pads then scratching the mousepad.
@@tili_ that isn't my experience with the icemat anyway. My mouse feet never got low enough to need replacement. Not sure how that would change across different ones though
#1 - I dare you to try and break one. You would find it quite difficult. #2 - The mousepad will be around longer than you. Maybe I’m biased cause I have a 2.0 XL but, I have a hard time not seeing the value long term 🤷♂️ A good amount of people even after using a skypad for a week will prefer the feel of cloth pad and that’s totally fine. If you want to feel like your mouse is on a ice hockey table, the skypad isn’t quite that smooth, but I think that’s good cause you get more control. Once you get a feel for it, it’s very consistent. TL;DR If you’re perfectly happy with using cloth pads you can skip it. But if you’re looking for something a little different give it a try.
As an owner of 3 of these Skypads (SkyPad XL 2.0[x2] and the new SkyPad XL 3.0) these are the best pads I've used in years. The noise you're probably hearing is some grime gummed up your your mouse feet. A new mouse or one with the teflon feet is super smooth and I don't hear a thing. Come on Riley!
I was using my Razer Scarab up till one year ago then switched to a Zowie GSR and now the original glass Icemat. The Scarab I used for well over 10 yrs as it’s a perfect hard mousepad and works very well.
i still rock my icemat i have had for almost 12 years. I also feel using what looks like a crappy ergo mouse on a glass mousepad shouldn't be used for comparison. I use a G502 on my icemat and boy is it quiet. maybe not as much with cloth but with headphones i don't hear it.
@@EliteProductions3129 " Looks like a crappy ergo mouse " Those are words i chose yes. take away about 50-60$ to the price-tag of the mouse because of the wireless function and boom. its a 60$ mouse. While good to those who prefer those styles... it looks like a ergo mouse and not one id personally ever use. It having two huge mouse pads might affect the performance of the glide... and also note that because its been primarily used by a cloth mouse-pad stuff gets stuck under the teflon skids, which causes that grinding noise. There are little minor things about having a glass mousepad I happily deal with over a cloth mousepad... The biggest positive here.. If well taken care of, the glass mousepad will last your gaming lifetime.
Long time Icemat user here. It's still going, and still kicking ass for FPS. The etching on the glass will eventually wear down and there will be less noise. You will go through mouse feet but w/e. Also, the pad will form weird optical reflections that the mouse will pick up. Spinning your character a million miles in a circle. Other than that I still love this thing.
the problem i always run into with cloth mousepads is that they get real dirty real fast, and usually they are dark colored so it really shows. Yeah, I can clean it, but it is much easier and quicker to clean a hard pad than a cloth pad
Used to have an Icemat, like 15 years ago. That thing got old real fast in the winter, when you wake up and your room is like 16-17°C. Cold as hell, noisy as F, and just overall terrible. I don't think this will fare any better.
I mean, if the Teflon pads are the make or break for the performance of the mat, I think the company should've considered sending some. They sent $500+ worth of mats in different colours and sizes, but didn't spring to send them any of the $8 feet? It didn't really help their case. It's not LMG's job to go out and buy the stuff required for the type of content on this channel.
@@austin.paquette Funny thing is, that Logitech G303 Shroud mouse they’re using in the video already comes with PTFE feet (Teflon is a trademarked name, not the actual name of the material). Most mice do these days. So I have no idea why those feet are so loud against the skypad in that video. I’ve tried several types of PTFE feet on my glass pad and it’s never been that loud. It’s possible the feet need to broken in, which is more of a Logitech issue than an issue with the mouse, because that would be the case on any surface. As for them sending him skates, you make a good point, but he also says that the skypads were sent, but then later says that he bought them… so who knows.
@@red_wheelbarrow641 So, my hands will occasionally leave some moisture on my pad when my hand gets a bit sweaty, but it’s never affected the glide in the way humidity affects most cloth pads. EDIT: I just realized you may not be talking about the glide, you might be talking about how it feels against your skin maybe? Hard to tell how you meant it. I’ve never needed an arm sleeve like this guy goes on about. I’m not exactly dragging my arm every which way. It’s worth noting that you don’t need to arm aim with a glass pad. One of the reasons I use a glass pad is because I have an old shoulder injury and a glass pad lets me wrist aim without losing the ability to flip around whenever needed, and without having my shoulder pain flair up. It’s not like I drag my whole forearm across my pad every time I make adjustments. Besides, the guy has a hoodie on… so he definitely gets no use out of the sleeve.
What I can't stand about using a mouse is that my arm is touching the table and especially with my lower palm when only my upper palm and fingers are using the mouse, not to mention my chair isn't elevated. It's annoying what I'm putting up with and it's been that way for years. Like since my 2nd laptop ever-a $75 Windows XP machine in 2016.
These are definitely for the more hardcore mouse enthusiasts. You see people on r/mousereview using these a lot. They do have a lot better glide and speed compared to something like a cloth pad, but there are some obvious downsides. And now that we're getting more glass mouse feet I think glass pads are going to die out.
@@UndrRatedEnt use a microscope and see if you have scratches and roughness on the glass. By design, an optical mouse CAN'T work if it's not seeing surface details, which good new glass will not have at all. Watch that video.
![[UA] Eternal Fire проти NAVI | EPL Season 20 Malta](http://i.ytimg.com/vi/chvlsDygrZM/mqdefault.jpg)
Interesting idea, but it's a hard pass from me. The noise would drive me crazy and I bet I'd be able to feel every microscopic piece of whatever between the mouse and the pad.
I feel every time I have a hair under my mouse and I have normal mouse bad. It really doesn't happen that often. But if you can feel smaller stuff when using that, it might be a problem
I have the skypad, and for most of the time you don't feel anything benieth it, only sometimes when it's something big which is super easy to just wipe away thanks to the smooth surface, the benefits definitely outweigh the drawbacks. It's not so loud that I really noticed after moving and it just blends in after a while. It's super easy to clean and for someone who eats at their desk like myself it's real nice to be able to clean it so easily.
Don't you wear headphones when gaming? It might not drive me crazy but it sure as hell will make my roommate kick me out.
Heaven forbid it was anything capable of scratching the crap out of it
With the right skates its not a problem, its quite unfair with the wrong pads.
I had this back in 2005 isch with the IceMAT and loved it, this might replace my LTT Mat :D
I've tried hard mouse pads before, don't like them. Don't think the surface being glass would change that.
It does. Plastic hard mats are gross and gritty, I've tried them and hated them, but a glass pad is amazing.
i tried hard mouse pads too - called desktop surface lol
I already have one of those, it came with my case.
Is it any good or Noisy?
Nicholas being given an ultimatum of saving his wife or world peace:
"Idk I kind of prefer the desk pad"
My 1st gen Icemat from earlier 2000s still in my drawer, only the mousepad rubber feet is melted due to aging.
Compare to today mousepad standard it make much louder noise in comparison to aluminium,hard surface or cloth surface mousepad.
Your mouse feet will wear out faster too.
I've had my hard plastic Compad Speedpad for about 20 years and wouldn't exchange it for anything else.
It's more silent than a glass pad and you can throw it out of the window from the 5th floor and it'll more likely chop someone's head off than break.
It's super easy to clean, slimmer than the glass pad, has beveled edges, still has all its rubber feet and works awesome with every mouse I have ever used, regardless if it's laser or optical.
I seriously don't understand why they aren't being made anymore.
I still got an old black Icemat lying around
it's quite small compared to todays mousepads, but it's also tempered glass etc. looks very much like that one tbh
though it's too noisy IMO.
I like the elements ice from GGMR - though it's hard to clean
I use a Green Arts and craft self healing Cuttin Mat thingy.
Works surpsiingly extremely well and i dont have to wash it like i would with a mouse pad.
Since they're local to LMG, just ring up Vitrum and ask them for a chamfered sheet of 3mm temp glass for about 30-40 bucks or less (any glass shop really), and paint the bottom with any colour of latex you like--like a piece of tempered spandrel glass. Wait til it dries, stick some rubber feet on the bottom. Buy the teflon mouse skids separately.
Save a ton.
$100 dollars is a complete rip off. I work for a window company. $100 is a rip for what that is.
Razer has the Sphex desk 'skin' which is basically a hard surface pad if you apply it straight to your desk. Very fast but much cheaper
The white one looks like the glass cutting board in my kitchen. Never thought to use my mouse on it. Lol.
Wow a blast from the past! I last used a glass mouse pad back in 2005!! (then it broke!!)
Glass pads was hyped like 15 years ago, I still have my corepad.
I bought the Razer Manticor a while ago, which is made of sandblasted aluminium.
It felt pretty amazing for a bit, but after a while, the mouse started to feel and sound really scratchy on it, and so I decided to retire it for a basic cloth mousepad.
I don't think I'll be going back to hard mousepads for a while, after that expensive purchase.
Testing these things without the teflonfeet seems kinda pointless to me. It's like testing new keyswitches on a keyboard, but without the keycaps on it. Would you do that?
People thinking mousepad materiel matters that much
Honestly it’s more about having a large enough space and one where the whole area is the same material
Consistency > whatever “gamer” product you’re using
still fan of the steel series Hd mouse pad.pretty flat,hard surface and easy to clean .Woould buy anytime again
I can tell you right now that your mousepad DOES matter and impact performance. I had a cheap $20 cloth mousepad from amazon that had a lot of friction. I got the GN mousepad (shown in this video) and my mouse felt entirely different: Much lighter and easier to move. It was a change that definitely improved my gaming performance.
Nitro Concepts has some nice big deskmats / mouse pads for not that much money.
If you're testing pads for mice can you test the ceramic ones. I've heard even lowered friction then PTFE
The bottoms should be a solid piece of rubber or something, those feet are going to allow the glass to flex and break.
Wait, so this is basically a glass cutting board I can buy at stores for like 10 - 15 bucks? XD
I have an old Gamind Glass mousepad here, i don't use it anymore but used a lot in the past with my Microsoft 1.1 optical mouse to play cs 1.5, that was +20 Years ago... i'm getting a little old...
Why do they look like kitchen cutting boards🤣🤣🤣🤣 with the same colours..lol🤣
I literally cannot finish the video because of the noise from the glass pad, I have NO IDEA who on earth would want that ear grating noise willingly
I use a trackball so I thought about it to have a nice stable, clean place (clean of lint too) and then I saw the logo, wow that ruined it for me.
I remember using a desk that had a sheet of tempered glass on the top. The laser could see the wood underneath it so I had to get a mouse pad.
For a moment I thought these were ginormous touchpads lol
why is there a hiss on the audio of the vid in some parts it freaked me out i thought it was my pc
great vid tho
The thing is cloth pads will wear out.
I have an aluminum mouse pad for like 6 Years and it's basicly the same as it was brand new
only way id consider it (especially at that price) is if i had edgelit ARGB so you could sync it with your PC and an integrated wireless charger for Qi compatible mice. Other than that, I'll keep my $20 waterproof Corsair deskpad. i could never handle the noise and the constant cleaning of it to keep dust to a minimum.
@0:45 I thought they were a stack of pizza..🍕🍕
The thing about sound it makes - I would imagine it is the same as if you use just the wood on the desk. If it is that, I can't really hear the noise but rather feel it with my hand, and that is driving me nuts
why would the sleeve stop you from getting pain after a day of gaming?
Don't people get pain from having a mouse arm? why does the sleeve help against that.
Ahhhhhhh, it's twenty years ago already. Not a single mention of the original, what a shame
It's REALLY stupid that they sent you a bunch of samples of the mousepad but no samples of the teflon feet. Since the whole product is built around the combination of the two.
Also, this absolutely needs a drop test. For that price it should be able to survive a drop as well as a corelle plate.
The feet are th same as any other 100% Teflon mouse foot. If I recall they're actually just selling someone else's. It's mainly because hard pads eat feet.
@@profosist Hang on a sec. Did I miss something? Did his test mouse already have Teflon feet on it?
wait... never mind. 2:19 (Editors note in subtitles: "The G303 does come with teflon feet")
I didn't catch that the first time around. 👍
I still want to see him drop it.
Was thinking my screen was busted
I've never used a mousepad at home. They've always moved around and limited my movements. The ones at my past jobs were disgusting. I would toss them when no one was looking. The sound on my (fake wood) desk doesn't bother me. Reminds me of sandpaper on wood, but a much lower pitch. I don't notice it 99% of the time. It's kind of like white noise.
20 years later we came back to glass mouse pads for gamers.
I can put my cloth mousepad in the washing machine. The noise would be an absolute deal breaker for me
honestly this guy did an outstanding job showcasting in this video
Gold Plated mousepads is where it's at
I'd be curious to know how it feels after a few hours of gaming. My hands sweat a little after a bit, and i wonder if that would streak on the glass
Thanks for the information
it probably won't break when dropped saw some videos of someone dropping/throwing it. tough sob
Resistance is useful for accuracy
I like this presenter. More of this guy
I haven't used a mousepad in over 10 years and my desk looks flawless 🤷♂️
he's playing while vsync on? look at that input delay
He took the silencer off the M4a1. This is a crime
Why would you make a 15 minute video about this mouse pad if you're leaving the teflon mouse feet out? At the end i still don't know how this setup actually works.
I have tried glass mousepads and they're not great. I live in a very SANDY area and sand GETS EVERYWHERE in this house. HELL my backyard is 70% sand and 30% EARTH. So, that pad would get scratched to heck in no time. Especially since my dog loves taking dust baths.
holy shit the room tone in this video is driving me nuts, adjust the levels my dudes
We had these some 20 years ago. They were called icemat and had the same teflon feet for my MX510. Sadly the noise does not go away but it was smoothhh AF for those times.
Yep same. With MX500. The logical dual optical didn't play nice with the glass and was generally not as good. Still have the jcepad XL, but don't use it anymore because of the noise and the noise skates just wear away so quick.
I still have, and use, mine...
Same here. I still have my old icemat and it still feels and looks like new. I used it with an all-time-favorit MX518.
I was waiting for this comment, YES I still have my icemat and and its still like new despite being almost an adult now
@@Rakadis Same here. Love my IceMat
I used an Icemat glass pad for years. Takeaways: the tiniest bit of dust or grit will instantly ruin your day. Also if your hand sweats, it'll show on the glass. It is super easy to clean though.
My brother had one of those, which is where I got the idea to make mine. I will never, ever go back to a fabric, plastic or any other non-glass mat.
@@mrtempertantrum Make?
@@EikottXD Icemats are basically frosted glass with colored film on the back.
So making one yourself is relatively easy (depending on your skill of course).
Artisan pads are only $55 to start (when in stock), so definitely less than 100.
But not available in Asia apparently
love my hien soft, i wanna buy another for when my current one eventually goes bad
@@koivids_ it's kind of crazy to me that the best of the best mousepads are under $100. Pretty unheard of in the tech industry.
not including shipping though
@@turboxide yes, but skypad shipping is the same anyway.
Thanks for recommending our DASH XD! We've got even faster glide on the horizon 👀
Resurrect the func anti-friction liquid please. Unless it turned out it was hazardous or something in which case please let me know as I still have some. :)
I used a Boost XL Speed and also tried the Control version for a couple of years. I would try a Dash but I cannot think of a reason after trying the Skypad. And I don't have to buy a new pad every year...I have the 3.0 ordered. So maybe try staying in y'alls own lane?
Small suggestion: For mousepad reviews, at least have a few different mice and (aftermarket) mouse skates at hand. I'm having the feeling that the skates supplied with the 303 just aren't that well compatible with this mousepad, since glass mousepads are usually wayy faster than average cloth deskmats. I think you guys could manage that
I agree, the testing could be a bit more thorough. Could at least have had a set of aftermarket mouse skates and waited on the first party skates from Skypad.
the logo on small one is totally okay. The logo with the cloud or something would prevent me from buying it. It looks really cheap, like it's from one of these cheap stuff stores. Talking about these stores: these stores usually also sell glass cutting boards for a lot less than 100$. I wonder how a glass cutting board would compare. I'm sure you'll be able to find a matte/frosted one.
I feel like you could go find a local "maker" and have them make you something that is way cooler for probably a similar price.
Yeah that logo is horrendous
Yeah, I had that same reaction when I saw that ugly, cheap-looking logo in the big one, to the point that I started thinking if it could be removed with some acetone.
@ Way back in the day when Steelseries/Icemat made similar glass mousepads, people would customise them by stripping the paint on the back and painting their own designs on them. I'd be willing to bet money that these are painted in the same way on the back side, though you'd have to strip the colour layer to get at the logo. But then you simply have a clear mousepad or you can paint it again.
maybe just buy a glass cutting board and scuff it with 2000-3000 grit polish
I have had one of these for a few years now, when I bought it it included enough teflon pads for 6 mice/changes I think, in two different textures. They do wear but the reason I ever changed mine is due to folding or them becoming uneven for some reason. Its too bad they aren't included anymore because they are everything, without them I wouldn't bother. Sound is gone and its pretty smooth.
My kind of only complaint is that you need to keep it really clean, dust will cause noise and impede movements. I just do it with my dishes. I don't mind though, cleanliness is good.
Good that it works for you, but I could never keep it clean enough. I try to get everything in my setup to just work without maintenance just so i don't need to do anything
All desk pads $30 is the only reason I bought one. It was so awesome to get the perfect size for my desk and not have to pay extra for it being "custom". Thank you Linus!
"are glass mousepads better?" in my head all i see is someone slaming their mouse in rage and shards of glass ripping apart their hand...
I've been using the SteelSeries Icemat I-2 for ~15 years. Still looks and feels new, not a single scratch. Dust wipes off easy. Once you use a new mouse on it for a bit, the feet do get a bit more quiet as they wear in, but still audible when making large fast moves. But tbh, I don't notice it during a game. One thing to also be aware of is, it can feel a tad cold in the winter if you have a cold room. But again, once you're gaming for a bit, it warms up.
Every few months, I debate buying the LTT cloth pad, but seeing how crappy my brothers Razer cloth pad looks after all the skin and grime, it does put me off cloth pads in general.
Overall, I'm still very happy with my glass pad 15 years on. At this rate, I think it is going to out last me. Best ever £30 or whatever I paid back then.
I guess your brother should wash his pad then. You can get them perfectly clean, but very few people do it.
I throw mine just in the shower and give it a little scrub with warm water and soap. Looks like new afterwards
@@icediverfull Absolutely. Although I just handwash it but the end result is always worth it
I wash my cloth pad every few months on cold hand-wash cycle. It looks good as new. Not saying it's better than a glass one, just something to consider.
Perhaps your brother should clean it.
You stole the comment right off me . The ice pad was epic but i dropped a cup of tea on mine a few years back and smashed it :(
If you want to help with the noise, peel the feet right off and let the glass lay on something like the desk pad. That air gap makes the noise louder.
@Yolanda,____💋 Clearly the report button does nothing to get rid of this trash... Thanks UA-cam...
@@majorbogart3476 Yeah, I can't fathom how, despite everything that google/youtube is capable of, they can't get rid of this very specific spam, plastered under every video a thousand times. I get that it's posted by bots from different accounts, but the content of the comment is pretty much copy/paste. Getting rid of it should be easy.
@@Renee_R343 it works to their benefit in the long run to let it continue. The more of a toxic cesspool that the comments are, the harder it will be for creators to gauge their audience, and the easier it will be to take it all away "for our own good", so that UA-cam can move closer to the old school ways of media and entertainment. We tell you what to watch and when. We will determine if it is worth your time or not, and worthiness can be bought and paid for. To be clear, UA-cam does not care about the opinions, needs, or wants of it's independent creators or users. They are concerned with advertisers, and the multi-billion dollar companies that pay for promoted content. They have NO PROBLEM taking money from pyramid schemes, illegal online drug stores, and straight up scammers, and running their ads in the videos. Everybody has seen the ads that I am talking about, and yet it has never been a topic that really gets discussed, because we are all busy being mad at the dislike button being gone, or a particular creator being suppressed, or whatever blah-blah drama is going on...
Never forget, this is a part of the company that felt it was necessary to remove "Don't be evil" from it's company values.
@@majorbogart3476 it's gone btw
The gap allows for the pad to resonate freely in the air. Putting it on a desk, or better yet, a regular mouse pad or foam shelf liner will dampen the vibration.
if its performing on par with a $30 deskmat in most ways, and is loud [unless you pay extra still] and smaller otherwise, I think im gonna go for a $30 deskmat
tacky logo
Yeah. Maybe worth it after all the accessories and stuff, but normal cloth is the best. I heard about aluminum one and maybe that's better
@@viiltelijamurhaaja7225 artisan hien >>>
I've had the Skypad for nearly a year. The noise is literally because of grime on the feet, and that the stock G303-SE feet are not rounded edges, they are literally trash on even cloth. The reason why they recommend the feet, is because they come with less impurities in the PTFE, and having more rounded edge. The only thing I will say as a con with the Skypad, is the noise because of the dust. Buy an air purifier, which, is always worth, and rounded feet, namely Tiger Arc 1, or Corepads as best value. Runner up being Tiger Ice, but you only get one set with Tiger Ice, Tiger Arc 2 are inferior in every way to all the others, and are only one set. Do not use glass feet, ceramic feet, etc on the Skypad. It will damage it. If you want less chance of dust, then use smaller feet. I recommend just using Tiger Arc 1 MS-3 style feet, they have really good rounding, are cheap, and readily available since they are purposely made for Microsoft mice, and any clones that use MS-3 style feet (Fantech XD5 and other products, Intellimouse Pro, etc.)
On a side note, the best perk of the Skypad, is as long as you don't intentionally scrape stuff harder than glass on the pad, it is technically indefinite, and if there is any grime, windex / rubbing alcohol / lighter fluid, etc, perfectly clean, dries in under a minute, vs washing a cloth pad and waiting a few hours for it to dry.
why the hell should anyone have to go through all that just for a mouse?!?
@@st33ldi9ital If it's not for you, just don't do it, that doesn't mean that other people can't take their hobbies seriously. It's kind of what runners do with running shoes, are they going to make you run 100 times better? Probably not but maybe a tiny difference in how you feel the ground is enough for winning the marathon.
@@haroldtrei Yea sure whatever you wanna believe or makes you feel better. Idgaf about feet or pad or whatever. Nothing been new in that space for over a decade. Lol dude really said get an air cleaner.. for your mouse... Switch to trackball and ya never have to worry about any of that. Can use whenever and wherever. No pad needed.
@@st33ldi9ital You don't, for the most part with a dusty room, it rarely happens. Even if you ain't using a hard pad, there are very few mice that actually come with good stock feet. Anything from Razer after the release of the Viper is fair, Burst Pro / Kone Pro, Logitech generally just has the worst stock skates. They literally use a foam spacer so that they have to spend less on PTFE...
@@st33ldi9ital The purifier is just for laziness. Personally, I only gotta brush dust off the pad once every two days. And cleaning is literally a 2 min ordeal. Point of glass is mostly just having consistency, no matter what. Like the dude that was talking about using an Icemat for 15 years or w/e.
3D Printer nerds have gone from Glass Print Beds to Glass Mousepads.
lol
I'm a former high level competitive CS 1.6 and CS Source player and I've been waiting ages for a mousepad like this to come out. I had an Icemat back when I was playing competitively and it was by *FAR* the best one I've ever used in terms of accuracy and smoothness. If it wasn't so small I'd still be using it today, but large mousepads were pretty uncommon back then and they never made a larger size. I will be buying two of these at least (just in case they stop selling them and I break one). Regarding the noise, you get used to it and filter it out to where you don't even notice it anymore. It's not loud enough to be intrusive, and if someone is in the room with you your keyboard and mouse clicking is far more of a problem than a soft scraping sound.
I've used an aluminum mouse pad before, and it's nice, until you get anything at all dirty on the pad or in the feet. You get friction spots / scratchiness that just sucks, and then your detailing the pad with your fingernail, or the bottom of you mouse with a toothpick, to get back to the good feel
I bought an aluminium mouse pad from corsair about 8-9 years ago now and it has been fantastic, best product they ever made even though I thought it was over priced when I bought it it has absolutely been worth it 10x over
Hell yeah same for me I still use my MM600 that I bought in 2015. Wonderful pad and I wouldn’t go back to a non-metallic pad.
I'm using mm350 pro from Corsair. Also have a backup Logitech g240. Both have been excellent servant to me. Although Corsair one is less sensitive to humidity
How well do your mouse skids/feet last on them, almost all the offices ive seen people use hard surfaces for their mice (glossy wood tops, glass tops) is that the feed wear fast and eventually they burn through to the point the feet are gone and the mouse is rubbing on its plastic, which is also starting to wear. sure it moves ok across the surfaces but after the feet wear off it starts to feel gritty.
@@12chrisrob I think my one is the mm600 but from before corsairs "yellow" phase so it has the origional corsair logo with plain black surfaces on both sides, it may actually be older than I thought it was.
@@starwarsnerd95 Mine is the one with the original corsair logo as well and the line is red, not yellow.
Man I've never been so not interested in something mouse related before, way too expensive and makes no difference for gaming for me personally since my mouse sensitivity is usually pretty high so I don't even need a pad that big.
Same, i play on a really high sens and mousepads size M/L are more than enough for me.
There is a difference if you use any after market mouse feet.
Me who uses no mouse pad😏
you need to get the skypad 3.0 to test properly, 50% more faster and less noise and thiner
Cloth pads are superior in every respect EXCEPT maintenance. Cleaning them is a horrible pain
Actually, I just put my cloth mousepad in the washing machine. Works perfectly.
Man, Linus sure changes a lot every couple of videos
something is off, seen some other reviews on these and they don't sound like grinding and they are so smooth the mouse almost flies off the pad, maybe you guys should give the alternative feet a try, even corepads which are some more famous aftermarket feet
I remember my dad had one of the first lazer mouse to come out, you litterially needed a mirrored surface to run it on
My mousepad is the arm of my recliner...
they probably used the worst possible mouse to try on that pad
0:38 I was expecting a "pizza time" lmao
I got an Icemat when I was younger and spent most of my life gaming on a glass mousepad (I'm 36, that was around 2003-ish). It appears to be very similar to this. Here are my thoughts on gaming on a glass mousepad:
1. The sound never really bothered me or anyone else, but I've been lucky enough that I've always had a private space to game.
2. The consistency is the best attribute. I still have my mousepad, and it has the exact same friction as the day I got it. The only reason I stopped using it is it's too small. (also slightly suspect this is why they stopped making them - never need to buy another one).
3. Palm sweat accumulates on the pad and so I found that I would wipe it off somewhat frequently. It didn't really impact my aiming though
4. Tracking is way better than you might expect. Even super old mice like my razer diamondback 3g tracked on it perfectly, but some super cheap mice couldn't track on it (I'm going to assume this wont be a problem with any modern mouse).
5. The lip of the glass against your wrist/forearm can rub and get a little bit irritated but honestly once you get used to it you forget about it all together.
6. I was so worried about my mousepad at first, I carefully wrapped it each time I moved etc. Turns out it was for nothing, that thing is a tank. I've dropped it on concrete no issues at all. It is substantially smaller than these though, so I suspect these won't be as invincible.
7. The paint on my Icemat began to flake away some on the bottom. It was black and the glass was frosted, so I filled it in with a sharpie and it worked perfectly.
8. If you don't have mouse feet and/or the bottom wears too far down you can get a suction effect going on when lifting that's literally unplayable but hilarious. Fun for hours if you're ADHD like me.
9. For best results use a new mouse with it from day one. The mousepad preserves the condition of the mouse and feet nearly never need changing. I wouldn't believe it if I didn't experience it first hand, but usually the "crappy mouse feel" comes from a mouse that's been tainted by being used on non-glass surfaces. This even extends to things you don't think of like stickers getting curled and snagged on cloth pads then scratching the mousepad.
i heard glass pads delete mouse feet
@@tili_ that isn't my experience with the icemat anyway. My mouse feet never got low enough to need replacement. Not sure how that would change across different ones though
#1 - I dare you to try and break one. You would find it quite difficult.
#2 - The mousepad will be around longer than you.
Maybe I’m biased cause I have a 2.0 XL but, I have a hard time not seeing the value long term 🤷♂️
A good amount of people even after using a skypad for a week will prefer the feel of cloth pad and that’s totally fine.
If you want to feel like your mouse is on a ice hockey table, the skypad isn’t quite that smooth, but I think that’s good cause you get more control. Once you get a feel for it, it’s very consistent.
TL;DR If you’re perfectly happy with using cloth pads you can skip it. But if you’re looking for something a little different give it a try.
issue with it being glass it'll be freezing to use in winter that's why I prefer fabric.
1:42 it wont, boardzy threw his at the road/pavement or wtever and it didnt break
who ever said KY jelly had me crying
you're welcome - Jono
As an owner of 3 of these Skypads (SkyPad XL 2.0[x2] and the new SkyPad XL 3.0) these are the best pads I've used in years. The noise you're probably hearing is some grime gummed up your your mouse feet. A new mouse or one with the teflon feet is super smooth and I don't hear a thing. Come on Riley!
Still using my Razer Scarab from back in 2011, I don't think glass will replace my regular hard pad soon
I was using my Razer Scarab up till one year ago then switched to a Zowie GSR and now the original glass Icemat. The Scarab I used for well over 10 yrs as it’s a perfect hard mousepad and works very well.
@@SpideyDiG Yep, it's small enough and got a carrying case, perfect to carry around
You also have to be very aware of the flatness of your desk/surface when using a hard top pad. If it's off by enough you're in wobble city.
Lol, I just watched baordzy’s review on this
i still rock my icemat i have had for almost 12 years.
I also feel using what looks like a crappy ergo mouse on a glass mousepad shouldn't be used for comparison. I use a G502 on my icemat and boy is it quiet. maybe not as much with cloth but with headphones i don't hear it.
Crappy ergo mouse? It's a G303..
@@EliteProductions3129 " Looks like a crappy ergo mouse " Those are words i chose yes.
take away about 50-60$ to the price-tag of the mouse because of the wireless function and boom. its a 60$ mouse. While good to those who prefer those styles... it looks like a ergo mouse and not one id personally ever use.
It having two huge mouse pads might affect the performance of the glide... and also note that because its been primarily used by a cloth mouse-pad stuff gets stuck under the teflon skids, which causes that grinding noise.
There are little minor things about having a glass mousepad I happily deal with over a cloth mousepad... The biggest positive here.. If well taken care of, the glass mousepad will last your gaming lifetime.
Please get the teflon feet and test this again, I really am curious about the decibel and the smoothness/accurateness of this.
both feet are teflon/ptfe. Logitechs teflon feet are from experience though a little worse than corepads.
Long time Icemat user here.
It's still going, and still kicking ass for FPS. The etching on the glass will eventually wear down and there will be less noise. You will go through mouse feet but w/e. Also, the pad will form weird optical reflections that the mouse will pick up. Spinning your character a million miles in a circle.
Other than that I still love this thing.
I shouldn’t have to wait for the product I bought to be the same as a cloth
the problem i always run into with cloth mousepads is that they get real dirty real fast, and usually they are dark colored so it really shows. Yeah, I can clean it, but it is much easier and quicker to clean a hard pad than a cloth pad
Used to have an Icemat, like 15 years ago. That thing got old real fast in the winter, when you wake up and your room is like 16-17°C. Cold as hell, noisy as F, and just overall terrible. I don't think this will fare any better.
As someone who uses a glass mousepad for gaming every day, I definitely feel like the Skypad was misrepresented here. This review was terrible.
I’m not sure I am myself a fan of these hard mousepads but other reviews on this mousepad has praised it so seeing this video was kind of weird.
I mean, if the Teflon pads are the make or break for the performance of the mat, I think the company should've considered sending some. They sent $500+ worth of mats in different colours and sizes, but didn't spring to send them any of the $8 feet? It didn't really help their case. It's not LMG's job to go out and buy the stuff required for the type of content on this channel.
i am curious how does it feel when its a hot day in summer? -is there a better feeling to it or worse compared to the "regular ones"?
@@austin.paquette Funny thing is, that Logitech G303 Shroud mouse they’re using in the video already comes with PTFE feet (Teflon is a trademarked name, not the actual name of the material). Most mice do these days. So I have no idea why those feet are so loud against the skypad in that video. I’ve tried several types of PTFE feet on my glass pad and it’s never been that loud. It’s possible the feet need to broken in, which is more of a Logitech issue than an issue with the mouse, because that would be the case on any surface. As for them sending him skates, you make a good point, but he also says that the skypads were sent, but then later says that he bought them… so who knows.
@@red_wheelbarrow641 So, my hands will occasionally leave some moisture on my pad when my hand gets a bit sweaty, but it’s never affected the glide in the way humidity affects most cloth pads.
EDIT: I just realized you may not be talking about the glide, you might be talking about how it feels against your skin maybe? Hard to tell how you meant it. I’ve never needed an arm sleeve like this guy goes on about. I’m not exactly dragging my arm every which way. It’s worth noting that you don’t need to arm aim with a glass pad. One of the reasons I use a glass pad is because I have an old shoulder injury and a glass pad lets me wrist aim without losing the ability to flip around whenever needed, and without having my shoulder pain flair up. It’s not like I drag my whole forearm across my pad every time I make adjustments. Besides, the guy has a hoodie on… so he definitely gets no use out of the sleeve.
What I can't stand about using a mouse is that my arm is touching the table and especially with my lower palm when only my upper palm and fingers are using the mouse, not to mention my chair isn't elevated. It's annoying what I'm putting up with and it's been that way for years. Like since my 2nd laptop ever-a $75 Windows XP machine in 2016.
These are definitely for the more hardcore mouse enthusiasts. You see people on r/mousereview using these a lot. They do have a lot better glide and speed compared to something like a cloth pad, but there are some obvious downsides. And now that we're getting more glass mouse feet I think glass pads are going to die out.
Glass mouse feet were already tried and they sucked hardcore. They were really bad.
It's actually less the speed and more the consistency.
These might be cool if they came clear. Then you could get one to sit on top of your desk pad and keep the aesthetics.
Optical mouse will not work on clear glass. Most mice are optical. Watch video "How does a Mouse know when you move it?..." from Branch Education
@@yaro_sem ??? Thats not true at all lol I have a clear glass top on my desk and my MSI clutch GM30 works perfectly fine
@@UndrRatedEnt use a microscope and see if you have scratches and roughness on the glass. By design, an optical mouse CAN'T work if it's not seeing surface details, which good new glass will not have at all. Watch that video.
That sound is an instant deal breaker for me
I really really hate that kind of sound
Idk feels like they should have used the feet as a third (or fourth if they want to do it on the LTT mat as well) comparison.
true, but most likely no difference since both are ptfe/teflon.
just different brandings, although Logitech stock is somewhat worse than the ones Skypad sell (corepads)
@@ehdbom wasn't aware of that, thanks