Great vid and liked, but is it really necessary to take the battery compartment back off, when all you need is the top motherboard to access everything?
***FIX**** finally!!!! I found out that the corners of the folding mechanism were pinching on one side, one corner, when I would open and close the screen. Inserted a small square piece of straw (fake plastic kind) between the screen and hing mechanism near volume button and tape it, so that it forced it not to pinch as hard on that corner. It is used as a very thin spacer. I put my phone cover over it all to hold it in place. This completely stopped the problem, 100%. Sometimes there is a software lag, but this is different becauce i will hear the 'screen on' click noise delayed, and the screen does turn on. It stopped blinking, glitching. My phone used to do the exact same and it drove me nuts for like 5 months. Almost forgot about this thread, so I decided to look it back up and share this good news. This fix has worked 100% now for over 2 weeks. I was initially inspired by reading something online that it had something to do with the mechanism sensor after dropping it. But with me it def had to do with how it was squeezing and pinching on one side of the hinge mechanism. Good luck to you all!!
Very helpful you saved me $500 .... Thank you very very much
Great vid and liked, but is it really necessary to take the battery compartment back off, when all you need is the top motherboard to access everything?
why have you removed both of the back covers? Is it not enough to remove the one at the motherboard?
My question exactly, it seems unnecessary???
***FIX**** finally!!!!
I found out that the corners of the folding mechanism were pinching on one side, one corner, when I would open and close the screen. Inserted a small square piece of straw (fake plastic kind) between the screen and hing mechanism near volume button and tape it, so that it forced it not to pinch as hard on that corner. It is used as a very thin spacer. I put my phone cover over it all to hold it in place. This completely stopped the problem, 100%. Sometimes there is a software lag, but this is different becauce i will hear the 'screen on' click noise delayed, and the screen does turn on. It stopped blinking, glitching. My phone used to do the exact same and it drove me nuts for like 5 months. Almost forgot about this thread, so I decided to look it back up and share this good news. This fix has worked 100% now for over 2 weeks. I was initially inspired by reading something online that it had something to do with the mechanism sensor after dropping it. But with me it def had to do with how it was squeezing and pinching on one side of the hinge mechanism. Good luck to you all!!
do you lose your photos ?
It works better now.
When I know how it work, I know I could hit it, without taking it apart = Taking it apart is way over me for now
Is it work for Flip 4 too?
yes
Nice 😊❤
ดี❤😂 ของผมก็เป็น คือแน่เลยครับส่วประกัน😊
you skipped the most important part, replacing the lcd
This just breaks it more
ขออนุญาตแชร์น่ะครับ❤
I'm just going to get a new phone.
Tried this method but no luck
Tested: NOT WORKING!